E90Post
 


PYSPEED
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > Halogen to (OEM) Xenon coded half succesfully? Or?



Reply
 
Thread Tools Search this Thread
      06-26-2011, 01:27 PM   #1
zeroXTC
Private
 
Drives: 320D - E90
Join Date: May 2011
Location: Denmark

Posts: 87
iTrader: (0)

Halogen to (OEM) Xenon coded half succesfully? Or?

I changed my cars halogen lights with OEM xenons. I did the "splice" ground wire setup inside the headlamps before install.

Its a 10/2005 -320D -E90.

After the installation i tried to turn on the car, and i was surpriced to see the lights turned on, cus i had not done the coding. I would get an error on the dash, but that would go away after 20-30 seconds.

Although my headlights will only turn on if the light switch is in the automatic position. If i turn them off, and then on, then they would stay off and i will get an error on the dash (sometimes one would turn on, sometimes they would flash)

I have now added VO $522 and disabled auto_leveing feature AUTO_LWR_ENABLE.

That has not changed anything, it is still the same.. xenons only work on the "autoswitch".

I use halogen for highbeams, and they work fine.

What am i missing here?

Btw. The car has daytime running lights on the low beams, as it is required by law here.

Last edited by zeroXTC; 06-26-2011 at 01:42 PM.
zeroXTC is offline  
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:46 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST