[Sales@modmy3.com]

Originally Posted by r45t4m4n

the four real small lights, those are for the door handles? how do you replace them?

Why would you need to replace them?

[R 4 5 T 4 M 4 N]

I have 4 really small lights in the kit I bought and I imagine that is what they are for?

[sjondhale]

Please PM best price shipped to 78216.
Thx

[Dickson]

The four tiny bulbs are for the 2 lights in the back seat on the center console. Two of the tiny bulbs go in each light housing.

[possible335i2008]

Are these lights can bus? As other kits seem to have issues in my car it's an 11/06 build 335i

[Sales@modmy3.com]

Originally Posted by zoltanh

The four tiny bulbs are for the 2 lights in the back seat on the center console. Two of the tiny bulbs go in each light housing.

Correct

Originally Posted by possible335i2008

Are these lights can bus? As other kits seem to have issues in my car it's an 11/06 build 335i

What kind of issues do you have? We installed this on the F10 5 series and didn't have any issues.

[Sales@modmy3.com]

to the top!

[tolbert86]

Just installed my lights took about 30 minutes. 20 of that was getting my front center light console down. But overall a great product and nice add on for 70 bucks.

[Sales@modmy3.com]

Originally Posted by tolbert86

Just installed my lights took about 30 minutes. 20 of that was getting my front center light console down. But overall a great product and nice add on for 70 bucks.

Thanks for the review Tolbert.

Glad the kit made it to you quickly!

[revlimit]

anyone have pics of the actual product? Wanted to see how the dome light look like.

[bchcky]

Price shipped to 79830?

[Sales@modmy3.com]

Originally Posted by revlimit

anyone have pics of the actual product? Wanted to see how the dome light look like.

The dome is a 12 panel LED, just like everyone else.

Originally Posted by bchcky

Price shipped to 79830?

You can get live quotes from the site. We do not fluctuate pricing between person to person. Cheers!

E90 here
E92 here

[Sales@modmy3.com]

bump!

[Sales@modmy3.com]

Super low pricing with super quick shipping!

[Sales@modmy3.com]

Orders from last night has been shipped. Everyone else will be shipped by 5 PM today with tracking numbers

[2ruSpeed]

Just finished installing this kit. Besides the pain of removing the front dome console, everything was really easy to install. Looks awesome at night and a huge improvement over stock. Great product!

[Sales@modmy3.com]

Originally Posted by 2ruSpeed

Just finished installing this kit. Besides the pain of removing the front dome console, everything was really easy to install. Looks awesome at night and a huge improvement over stock. Great product!

Thank you for the support!

[didyoufeelit]

am i the only one running into issues with installing the dome lights?

i believe i have extra pieces, i have 8 pieces left over for the dome lights, but i only need 4 (2 for each dome), correct?




above: panel and the wire that goes into the bulb holder (this is all that is needed right?)

below: extra parts??

after installing the LED panels with the wire that goes into bulbholder, the dome lights (rear and front) still don't turn on.. can't be a blown fuse because when i put the halogens back in, they turn on. the LED panels don't turn on though. i don't know if it has to do with using the bottom "extra" parts, but i was told those parts were unnecessary.

could the panels be defective?? please let me know!

[2ruSpeed]

didyoufeelit Yes the four parts towards the bottom of your picture are extra parts.

Check the connector end that goes into the bulb holder, there are two silver "prongs" on the connector end that may need to be adjusted to make contact with the slot in the bulb holder (best description I can really give for now). I had to do that to get one of my panels to work.

[Sales@modmy3.com]

Originally Posted by didyoufeelit

am i the only one running into issues with installing the dome lights?

i believe i have extra pieces, i have 8 pieces left over for the dome lights, but i only need 4 (2 for each dome), correct?




above: panel and the wire that goes into the bulb holder (this is all that is needed right?)

below: extra parts??

after installing the LED panels with the wire that goes into bulbholder, the dome lights (rear and front) still don't turn on.. can't be a blown fuse because when i put the halogens back in, they turn on. the LED panels don't turn on though. i don't know if it has to do with using the bottom "extra" parts, but i was told those parts were unnecessary.

could the panels be defective?? please let me know!

Correct. The bottom parts are extra as other cars requires different connectors. We provide them just as an additional items to the kit.

Originally Posted by 2ruSpeed

didyoufeelit Yes the four parts towards the bottom of your picture are extra parts.

Check the connector end that goes into the bulb holder, there are two silver "prongs" on the connector end that may need to be adjusted to make contact with the slot in the bulb holder (best description I can really give for now). I had to do that to get one of my panels to work.

You are absolutely correct. Also when turning for the dome, ensure that you twist the top left and right as well that controls the polarity on the dome light

[didyoufeelit]

hm..i'm pretty sure i checked that everything was making contact. i guess i'll try again today and let you guys know. thanks

[didyoufeelit]

turned out to be a polarity issue..just had to turn the bulb housings 180 degrees and it worked out.

now all LEDs on my car...except for the headlights... hahah