E90Post
 


Horizon LED
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > AUDIO/VIDEO + BLUETOOTH + Electronics/Alarm/Software > E92 Boot Install Advice



Reply
 
Thread Tools Search this Thread
      09-09-2011, 11:59 AM   #1
neocleous
Private
2
Rep
67
Posts

 
Drives: 325i SE E92 Coupe
Join Date: Apr 2007
Location: UK

iTrader: (0)

E92 Boot Install Advice

Hi all,

As some of you may know I have been getting advice from the forums on some equipment for my E92 and I have finally got back from a long business trip and I am ready to start the second phase of my install .

Now as my install stands I have used allot of equipment from my old 1 series but it doesn't really work that well in my 3 series coupé so I am replacing allot of it.

At the moment I have replaced the head unit with a Pioneer AVIC-F920BT and I have a pair of earthquake SWS-8's under the seats which are staying and a pair of DLS components which sound awful in my car because they are 3 ways but I am not using the mid bass speakers and one of the tweeters isn't working so they are getting replaced!

My new equipment will be....

Genesis Profile 4 Ultra to power the tweeters and door speakers.
Genesis Profile 2 Ultra to power the SWS-8's
Audison Bit One
Morel Hybrid Ovations (These are going to be PITA to install)
Earthquake SWS-8 under seat subs

This will be a fully active system and hopefully sound very good.

I striped my boot out today and I am looking to borrow your imaginations on possible installs, I have posted some pics below so you get an idea off what an E92 boot looks like striped.





You can see in the pictures my Genesis Profile 4 Ultra mounted upside down which I know is controversial but it has a fan built in and so far it has never shut down or had any problems and its nicely out of the way where it is. It is also a very long amp 450mm (17.8inches apparently) which makes hiding it quite hard suggestions welcome though!

I am also replacing the RCA's as there is a problem with one of them hence the ground loop isolator so that will be gone too

The profile 2 Ultra should fingers crossed fit on the left hand side opposite the battery (my car doesn't have the mount or the trim for the CD changer) so there is quite a bit of room there and obviously there is the space where the spare wheel should go.

So what are peoples suggestions on possible configurations and equipment placement quality and a stealthy install are my top priorities all the cables will be braided and colour coded etc.

Thanks!
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:28 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST