Extreme Power House
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > Cant see much

Thread Tools Search this Thread
      09-12-2011, 03:52 AM   #1
marcm's Avatar
United Kingdom

Drives: E93 335i LCI
Join Date: Jan 2007
Location: UK

iTrader: (1)

Cant see much

Hi All,
I've been trying to do a bit of CAN sniffing on my 08 E90. I have a canbus analyzer and I have connected to pins 6 and 14 so I can see the data.

From what I have read I should be able to see the PT-CAN data but all I can see are the following messages:

Started: 08/09/2011 21:24:29
RX (HEX),130,5,C1,42,FF,FF,FF,,,,425.381,0.1,
RX (HEX),130,5,C1,42,FF,FF,FF,,,,0.915,0.04,
RX (HEX),130,5,D5,42,FF,FF,FF,,,,0.965,0.05,
RX (HEX),130,5,C5,42,FF,FF,FF,,,,1.855,0.07,
RX (HEX),130,5,C1,42,FF,FF,FF,,,,14.677,0.1,

C1 = Ignition ready
D5 = Engine starting
C5 = Engine running

I have tried to send a request for PID 0 in the hope that might trigger the bus into showing more data. I think the analyzer sent:
0x7DF, 0x02, 0x01, 0x00

But I get nothing not even the designated ACK with the bitfield.

Is there anything else I should be doing or something I could try ?

I am going to get a scope on the bus and see if the analyzer is actually transmitting the message, I'm sure it is as it can see the ignition status message.

Any help/insight/tips greatly appreciated.
Appreciate 0


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 11:36 AM.

Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST