Hey Guys,

Here's a little walkthrough/augmentation to the existing docs out there to make it as easy as possible to get started with DIY coding. The steps below worked 100% for me with my 2011.5 E90 LCI 335xi, using Windows 7 on a Macbook air. I have zipped every needed file and...

thanks a lot! I'm downloading it right now.

Anybody try this with a 08 335i? If so, can I get any feedback...

Any updates on process/procedures? How about latest inpa and edidbas

Thanks Phil for posting your instructions and sharing your Master Zip. I'm ready to give it a try.

I came across your post after hitting errors "COAPI-2000:EDIABAS or SGBD error" and "BIP-0009: BEST VERSION ERROR" while attempting to code my NFRM module for Folding Mirrors with the Key FOB.

I'm still not sure which DATENS I need, my dealer updated the software when it was in last June, 2012.

From all the searching, installing, uninstalling, searching... that I've done, it seems that the newer Datens require newer versions of EDIABAS. I kept trying to install the BMW STANDARD TOOLS 2.11, but it results in empty INPA menus.

Finally, I settled on installing BMW STANDARD TOOLS 2.11, then overwrote the installation directories with the directories in your Master Zip.

I've been this all weekend, and now my Car battery is almost dead. I'm going to startup my other car and connect jumper cables to the 335xi so I can have enough juice to push on with the coding.

Thanks again for posting your working version! Fingers crossed it'll work for me.