E90Post
 


ECS BMW
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > DME updated via winkfp



Reply
 
Thread Tools Search this Thread
      01-10-2015, 02:56 PM   #1
laurentProd
Private First Class
4
Rep
157
Posts

Drives: E93
Join Date: Feb 2013
Location: France

iTrader: (0)

Exclamation DME updated via winkfp

Hey guys,
today I did an update of my DME module via winkfp. (daten v53)
All went fine. Engine is starting and running real fine BUT under INPA when displaying errors fault codes I got this one showing up :

Code:
$FehlerOrtNr: 12195
$FehlerOrtText: 0x2FA3 Codierung fehlt                                           
57012FA36800000001281BD700630000000000000000000000000000
Fehler: 1(1) Nr: 12195   0x2FA3 Codierung fehlt                                           Häufigkeit: 1
  Fehlerart: 8   (4351 ) keine Codierung erfolgt (nach Programmierung)                      
  Readines Flag: (16 ) Testbedingungen erfüllt                                              
  Fehlerstatus:  (35 ) Fehler momentan vorhanden, OBD-entprellt                             
  MIL - Status:  (48) Fehler verursacht kein Aufleuchten der Warnlampe (MIL)                
  P-Code:                                                                                 F_LZ: 40
Seems like I need to code another module... but which one?
Could someone help me?




Ekp module is up to date...

Last edited by laurentProd; 01-10-2015 at 03:08 PM.
Appreciate 0
      01-10-2015, 04:04 PM   #2
laurentProd
Private First Class
4
Rep
157
Posts

Drives: E93
Join Date: Feb 2013
Location: France

iTrader: (0)

ok so I did an update of dsc as well.
Now got a lot of warning messages on the iDrive.

Brake assist failure
Dtc failure
tire pressure sensor failure
(I lost euro RDC system which calculates through ABS now I have TPMS shwing up... damit. Need to find how to recode that!)

I saw that I can recalibrate all via dis 57 but I don't have it...

Any other way to do that?
Appreciate 0
      01-10-2015, 04:30 PM   #3
Sensible_
Captain
27
Rep
704
Posts

Drives: 2008 E90
Join Date: Feb 2012
Location: London

iTrader: (1)

If you play with DSC make sure after code it back to VO default with NCSEXPERT then re calibrate steering angle sensor with tool32. It's super simple. "lenkwinkel dsc abgleichen" is the job you need!

This thread shows you with pictures!

http://www.e90post.com/forums/showthread.php?t=914544
Appreciate 0
      01-10-2015, 04:51 PM   #4
laurentProd
Private First Class
4
Rep
157
Posts

Drives: E93
Join Date: Feb 2013
Location: France

iTrader: (0)

Thanks for your quick reply!

ok so module reset !
Errors are now gone!

But I still do have TPMS showing up in the iDrive instead of RDC ...
Do you know which module need to be recoded??

Last edited by laurentProd; 01-10-2015 at 05:00 PM.
Appreciate 0
      01-10-2015, 05:01 PM   #5
bajandrifter
Private First Class
bajandrifter's Avatar
United Kingdom
4
Rep
191
Posts

Drives: bmw e92 320d m sport
Join Date: Apr 2013
Location: east london

iTrader: (0)

I told u in my other thread. U NEED DIS OR ISTA/d to reset pressure settings
Appreciate 0
      01-10-2015, 05:09 PM   #6
laurentProd
Private First Class
4
Rep
157
Posts

Drives: E93
Join Date: Feb 2013
Location: France

iTrader: (0)

Quote:
Originally Posted by bajandrifter View Post
I told u in my other thread. U NEED DIS OR ISTA/d to reset pressure settings
OK but will it change the TPM menu in the iDrive as well ???

I'm installing dis 57 right now ...
Appreciate 0
      01-10-2015, 05:15 PM   #7
bajandrifter
Private First Class
bajandrifter's Avatar
United Kingdom
4
Rep
191
Posts

Drives: bmw e92 320d m sport
Join Date: Apr 2013
Location: east london

iTrader: (0)

Just use ncs expert to default code the dsc from your vo. Then use dis to rest/calibrate in order for the unit to function again.

All the failures are due to missin settings that needs DIS/ista/d

That menu ur on about is simply coding. Just code a blank .man file in expert mode with ncs.
Appreciate 0
      01-10-2015, 05:17 PM   #8
bajandrifter
Private First Class
bajandrifter's Avatar
United Kingdom
4
Rep
191
Posts

Drives: bmw e92 320d m sport
Join Date: Apr 2013
Location: east london

iTrader: (0)

Quote:
Originally Posted by laurentProd View Post
Hey guys,
today I did an update of my DME module via winkfp. (daten v53)
All went fine. Engine is starting and running real fine BUT under INPA when displaying errors fault codes I got this one showing up :

Code:
$FehlerOrtNr: 12195
$FehlerOrtText: 0x2FA3 Codierung fehlt                                           
57012FA36800000001281BD700630000000000000000000000000000
Fehler: 1(1) Nr: 12195   0x2FA3 Codierung fehlt                                           Häufigkeit: 1
  Fehlerart: 8   (4351 ) keine Codierung erfolgt (nach Programmierung)                      
  Readines Flag: (16 ) Testbedingungen erfüllt                                              
  Fehlerstatus:  (35 ) Fehler momentan vorhanden, OBD-entprellt                             
  MIL - Status:  (48) Fehler verursacht kein Aufleuchten der Warnlampe (MIL)                
  P-Code:                                                                                 F_LZ: 40
Seems like I need to code another module... but which one?
Could someone help me?




Ekp module is up to date...
U need to update the dme, ekp, and msd80(in my case) together to the same i-level. U can also try resetting the adaptations with inpa. But if you use dis57 or ista/d that would tell younwhT u need to do.
Appreciate 0
      01-10-2015, 05:53 PM   #9
Sensible_
Captain
27
Rep
704
Posts

Drives: 2008 E90
Join Date: Feb 2012
Location: London

iTrader: (1)

Quote:
Originally Posted by laurentProd
Thanks for your quick reply!

ok so module reset !
Errors are now gone!

But I still do have TPMS showing up in the iDrive instead of RDC ...
Do you know which module need to be recoded??
I don't understand the problem. You coded DSC to default VO and did DSC Steering angle recalibrate? All error gone? What's the problem?

I think tool32 / INPA / NCSexpert /winkfp can solve any further issues... These are factory level tools not dealer tools like ISTA /d (although it is very good).

What faults remain?
Appreciate 0
      01-10-2015, 07:58 PM   #10
laurentProd
Private First Class
4
Rep
157
Posts

Drives: E93
Join Date: Feb 2013
Location: France

iTrader: (0)

Well I've managed to clear all errors by recoding to default the DSC module.
Then for the TPMS to RDC issue I also recoded the cappl and chost modules.
Now everything is working fine BUT under INPA when trying to read fault codes under engine msd80 section I get this error :


Code:
$FehlerOrtNr: 12195
$FehlerOrtText: 0x2FA3 Codierung fehlt                                           
57012FA36800000001281BD700630000000000000000000000000000
Fehler: 1(1) Nr: 12195   0x2FA3 Codierung fehlt                                           Häufigkeit: 1
  Fehlerart: 8   (4351 ) keine Codierung erfolgt (nach Programmierung)                      
  Readines Flag: (16 ) Testbedingungen erfüllt                                              
  Fehlerstatus:  (35 ) Fehler momentan vorhanden, OBD-entprellt                             
  MIL - Status:  (48) Fehler verursacht kein Aufleuchten der Warnlampe (MIL)                
  P-Code:

I have updated DME
MSD80 was automatically updated at the same time.
No need to update Ekp module as it is already up to date.

Last edited by laurentProd; 01-10-2015 at 08:36 PM.
Appreciate 0
      01-10-2015, 08:09 PM   #11
laurentProd
Private First Class
4
Rep
157
Posts

Drives: E93
Join Date: Feb 2013
Location: France

iTrader: (0)

Thumbs up

SOLVEDDDDDDDDDDDDDDDDDDDDD !!!!!!!!!!!

I reencode the control unit (MAN empty file) and error is now gone !!!
I also reset all the adaptation values.


wooohooooooooooooo !!

Thanks guys !!!!

Last edited by laurentProd; 01-10-2015 at 08:38 PM.
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 06:04 AM.




e90post
e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST