E90Post
 


TNT Racewerks
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > For Help with NCSExpert Errors



Reply
 
Thread Tools Search this Thread
      06-30-2013, 11:19 AM   #133
PichaDis11
Captain
United_States
9

 
PichaDis11's Avatar
 
Drives: 08 328i
Join Date: Mar 2013
Location: NY


Posts: 978
iTrader: (3)

need some help with these errors.
Trying to test for Air bags in INPA I get a version maybe mismatched error.

Hers A copy of the log in NCS errors that I saw just trying read out FA.

Quote:
[12:00:04.265] [2013-06-30] [SERIE] 1020 Error CDH.C CDHGetCodierBaureihe 2
[12:00:04.265] [2013-06-30] [SERIE] Datei konnte nicht zum Lesen geoeffnet werden

[12:00:04.265] [2013-06-30] [SERIE] 1000 Error CDH.C CDHSetBaureihe 2
[12:00:04.265] [2013-06-30] [SERIE] Fehler E89

[12:00:04.265] [2013-06-30] [SERIE] 1000 Error COAPI.CPP coapiSetBaureihe 2
[12:00:04.265] [2013-06-30] [SERIE] Fehler E89

================================================== ==============================
[12:00:07.093] [2013-06-30] [SERIE] 1020 Error COAPI.CPP coapiReadZcsSgFromBr 2
[12:00:07.093] [2013-06-30] [SERIE] Datei konnte nicht zum Lesen geoeffnet werden C:\NCSEXPER\BIN\sgfam.dat
Using NCS Version 4.0.1
Appreciate 0
      07-03-2013, 09:01 AM   #134
eeghie
Kind of a Big Deal
17

 
Drives: an 1M not often enough
Join Date: Jan 2011
Location: between Unlimited and Hard to Get


Posts: 1,222
iTrader: (0)

Quote:
Originally Posted by ****** View Post
Remove +KRAD from your VO. I even don't know what is it, but someone has added option that doesn't exist.

Unless this option does exist, but you use too old version of NCS expert and you need to update it.
I sent you PM.
Interesting post, particularly as I'm tempted to agree that the +KRAD represents a ghost module:

Recent US cars with professional audio S663A have 2uRad module (u represents US version of the 2Rad). If brought to Europe, local dealers will have coding problems when the combination of options does not require the MOST bus. This is because some EU dealer software insists to connect to the MOST bus (even if it is not present).

So my guess is in an attempt to get advance with the dealer diagnostic software they/the software 'retrofits' the RAD module in trail and error mode. Successful or not, the dealer has no means (NCSEXPERT) to remove such addition from the VO/FA later on.
Appreciate 0
      07-16-2013, 08:00 AM   #135
beezer86
Registered
0

 
Drives: bmw x3 e83
Join Date: Jul 2013
Location: United States


Posts: 2
iTrader: (0)

I found your post while trobleshooting a problem I am having trying to code the aux on a 2006 X3 e83, it is throwing an error when I try to write the .man file back to the car.

What is the version of NCS-Expert I should be using? I have CoapiV3.5.1B. Daten files are from 10/18/2010.

Thanks for your help.
Appreciate 0
      07-16-2013, 08:22 AM   #136
pweber
Banned
Germany
2

 
pweber's Avatar
 
Drives: M57 330D
Join Date: May 2013
Location: Heilbronn


Posts: 258
iTrader: (0)

Quote:
Originally Posted by beezer86 View Post
I found your post while trobleshooting a problem I am having trying to code the aux on a 2006 X3 e83, it is throwing an error when I try to write the .man file back to the car.

What is the version of NCS-Expert I should be using? I have CoapiV3.5.1B. Daten files are from 10/18/2010.

Thanks for your help.
I tried to reply you, but you are new member and I can't do this.
You need to install Standard Tools 2.12 and upadte with at least sp-daten 49.

Give me your email, I will send you all you need.
Appreciate 0
      07-18-2013, 01:04 PM   #137
JDrago1926
335i Owner
9

 
Drives: BMW 335i 4 Door
Join Date: May 2013
Location: New York


Posts: 785
iTrader: (4)

Garage List
2007 BMW 335i  [0.00]
Quote:
[14:03:00.077] [2013-07-18] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6
[14:03:00.077] [2013-07-18] [SERIE] Error in EDIABAS or in ECU description file (SGBD) FA_READ

[14:03:00.078] [2013-07-18] [SERIE] 2000 Error COAPI4.CPP coapiReadAuftrag 4
[14:03:00.078] [2013-07-18] [SERIE] Error in EDIABAS or in ECU description file (SGBD) FA_READ: A_PL2FRX

[14:03:00.083] [2013-07-18] [SERIE] 2000 Error LFCDHDIA.CPP (A_PL2FRX.IPS/IPO) CDHapiResultText 1
[14:03:00.083] [2013-07-18] [SERIE] Error in EDIABAS or in ECU description file (SGBD) IFH-0018: Initialization error FRM_87

[14:03:00.084] [2013-07-18] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6
[14:03:00.084] [2013-07-18] [SERIE] Error in EDIABAS or in ECU description file (SGBD) FA_READ

[14:03:00.085] [2013-07-18] [SERIE] 2000 Error COAPI4.CPP coapiReadAuftrag 4
[14:03:00.085] [2013-07-18] [SERIE] Error in EDIABAS or in ECU description file (SGBD) FA_READ: A_PL2FRX

[14:03:00.091] [2013-07-18] [SERIE] 2000 Error LFCDHDIA.CPP (A_E65CAS.IPS/IPO) CDHapiResultText 1
[14:03:00.091] [2013-07-18] [SERIE] Error in EDIABAS or in ECU description file (SGBD) IFH-0018: Initialization error CAS

[14:03:00.092] [2013-07-18] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6
[14:03:00.092] [2013-07-18] [SERIE] Error in EDIABAS or in ECU description file (SGBD) FA_READ

[14:03:00.092] [2013-07-18] [SERIE] 2000 Error COAPI4.CPP coapiReadAuftrag 4
[14:03:00.092] [2013-07-18] [SERIE] Error in EDIABAS or in ECU description file (SGBD) FA_READ: A_E65CAS

[14:03:00.093] [2013-07-18] [SERIE] 1000 Warning COAPI.CPP coapiReadFgNr 9
[14:03:00.093] [2013-07-18] [SERIE] Error CAS

================================================== ==============================(2)
[14:03:00.098] [2013-07-18] [SERIE] 2000 Error LFCDHDIA.CPP (A_E65CAS.IPS/IPO) CDHapiResultText 1
[14:03:00.098] [2013-07-18] [SERIE] Error in EDIABAS or in ECU description file (SGBD) IFH-0018: Initialization error CAS

[14:03:00.099] [2013-07-18] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6
[14:03:00.099] [2013-07-18] [SERIE] Error in EDIABAS or in ECU description file (SGBD) FGNR_LESEN

[14:03:00.100] [2013-07-18] [SERIE] 2000 Error COAPI.CPP coapiReadFgNr 12
[14:03:00.100] [2013-07-18] [SERIE] Error in EDIABAS or in ECU description file (SGBD) FGNR_LESEN: A_E65CAS

Anyone? It was working at 2AM last night
__________________
E90 - 2007 BMW 335i Sedan
40K miles
7" VRSF FMIC | BMS DCI | AR Catless DPs | OFT Stage 2
KW v2 Coilovers | M3 Front Control Arms
Appreciate 0
      07-20-2013, 01:14 PM   #138
beezer86
Registered
0

 
Drives: bmw x3 e83
Join Date: Jul 2013
Location: United States


Posts: 2
iTrader: (0)

I know I don't have an E90 but using NCS Expert I am getting an error when trying to turn on the aux on the radio.

updated ncs to v4.0.1 (2012), daten files to 46.3 (11/2012)

here is the error when I try to write the code back to the car (all is good before that)

2060 PABD/CABD A_RA_NG.IPS Cod_SG_CODIEREN 58
Codierung fehlerhaft (allgemein) C_RADIO, C_C_AUFTRAG: ERROR_VERIFY

2060 Error COAPI2.CPP coapiRunCabd 6
Codierung fehlerhaft (allgemein) SG_CODIEREN
Appreciate 0
      09-30-2013, 02:00 AM   #139
drivebmw
Registered
0

 
Drives: bmw e90
Join Date: Sep 2013
Location: germany


Posts: 2
iTrader: (0)

hey guys, I updated my SP-Daten from v49 to v50.2 because at e91 chassis (2010) I didnt get an access to the ECUs like NFRM. (At e60 it works very fine)

So I updated it like this:
Folder: Daten: execute laden.bat
Folder: Copied the files of ECU: in C:/EDIABAS/ECU and overwrited it
Folder: Copied the files of SGDAT: in C:/NCSEXPER/SGDAT and overwrited it

When I choose e89 and try to get a connection to the car via CAS this error will pop up:

"ERROR! Modul: LFCDHDIA.CPP (A_E65CAS.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: Fehler in EDIABAS oder in SG-Beschreibungsdatei
SYS-0005: SG-Beschreibungsdatei nicht gefunden"

NCS expert version: 3.1.0

hope that someone can help me

Last edited by drivebmw; 09-30-2013 at 03:40 AM.
Appreciate 0
      10-29-2013, 09:11 PM   #140
d1saster
Second Lieutenant
Bulgaria
2

 
Drives: X1 s28i
Join Date: Oct 2012
Location: Las Vegas


Posts: 213
iTrader: (0)

2URAD Error Reading ECU

Can't read 2URAD module. All other modules coded correctly. SP Daten 50.2, NCSExper 4.0.1, Standard Tools 2.12. While coding job is active it gives me this info: RAD2.C03, A_E65MMI.IPO, RAD2.PRG. The car is X1 e84 September 2013, Professional Radio. I suspect it is something to do with the MOST communication and Pin 7/8.

Error.log
[16:22:42.012] [2013-10-29] [SERIE] 2020 Error LFCDHDIA.CPP (A_E65MMI.IPS/IPO) CDHapiResultText 1
[16:22:42.012] [2013-10-29] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht RAD2

[16:22:42.122] [2013-10-29] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[16:22:42.122] [2013-10-29] [SERIE] SG antwortet nicht CODIERDATEN_LESEN
Attached Images
 
Appreciate 0
      10-29-2013, 09:21 PM   #141
cn555ic
BimmerPost Supporting Vendor
United_States
241


 
cn555ic's Avatar
 
Drives: Bimmerscoding.com
Join Date: Jun 2007
Location: New York


Posts: 18,286
iTrader: (5)

Send a message via Yahoo to cn555ic
The 2URAD needs an ICOM interface to be able to read the module...Most you can do with Dcan cable is do a SG_RESET
Appreciate 0
      11-28-2013, 10:48 AM   #142
F30-BKK-JKT
New Member
Thailand
2

 
Drives: F30XXX
Join Date: Jan 2013
Location: Bangkok - Jakarta


Posts: 26
iTrader: (0)

PROFILES NCSexpert v.4.0.1

Can anybody send me some profiles for my newly installed NCSExpert v401... which i believe its the latest one. After I installed I only got one profile, and NO EXPERTMODE/REVTOR
__________________
VMR - BC Coilovers - aFe - M Performance - CODED
Appreciate 0
      12-08-2013, 09:52 AM   #143
beema_geeza
New Member
0

 
Drives: e93 black m sport red leather
Join Date: Jun 2013
Location: west mids


Posts: 12
iTrader: (0)

HI trying to write nfrm, kombi, dsc and a couple other ecus Im getting coapi 2000 error
ive updated sp daten files to V51 by using laden.bat and tried using bmw coding tool program to do it for me ncs dummy will not read the trc files correctly on in bmw coding tool I can read then try and write get the coapi error
do I need older spdaten files to read the other modules
thanks
ERROR! Modul: LFCDHDIA.CPP (A_DMOT.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: Fehler in EDIABAS oder in SG-Beschreibungsdatei
BIP-0009: Faulty BEST version of description file

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERINDEX_LESEN

>> ERROR! Modul: COAPI.CPP, Proc: coapiReadCodierIndexFromSg, LineNr: 05, ErrorNr: 2000
CODIERINDEX_LESEN: A_DMOT

>> ERROR! Modul: LFCDHDIA.CPP (A_DMOT.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
BIP-0009: Faulty BEST version of description file

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERDATEN_LESEN

ERROR! Modul: LFCDHDIA.CPP (A_DMOT.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: Fehler in EDIABAS oder in SG-Beschreibungsdatei
BIP-0009: Faulty BEST version of description file

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERINDEX_LESEN

>> ERROR! Modul: COAPI.CPP, Proc: coapiReadCodierIndexFromSg, LineNr: 05, ErrorNr: 2000
CODIERINDEX_LESEN: A_DMOT

>> ERROR! Modul: LFCDHDIA.CPP (A_DMOT.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
BIP-0009: Faulty BEST version of description file

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERDATEN_LESEN

ERROR! Modul: LFCDHDIA.CPP (A_PL2KMB.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: Fehler in EDIABAS oder in SG-Beschreibungsdatei
BIP-0009: Faulty BEST version of description file

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERINDEX_LESEN
Appreciate 0
      12-09-2013, 06:23 PM   #144
bpowell
New Member
0

 
Drives: 2011 BMW 328i xDrive
Join Date: Nov 2013
Location: Minneapolis, MN


Posts: 22
iTrader: (0)

Ok guys Im at the point of doing the digital speedometer and when I open up my FSW PSW file to find "BC_Digital_V" its not there....

This is what is in my FSW PSW file.



BAUREIHE
e90
BAUART
limousine
MOTOR_ART
benzin_normal
TYP_LENKUNG
linkslenker
ZYLINDER_ZAHL
6_zylinder
GETRIEBE_GAENGE
6_gaenge
KLASSE_BATTERIE
90ah
STROM_RUHE
wert_01
STROM_KS_MIN
wert_01
STROM_KS_MAX
wert_01
STARTABBRUCH_BREMSE
aktiv
KOMFORTSTART
aktiv
KOMFORT_EIN
aktiv
ERROR_EJECT
nicht_aktiv
ZEIT_BREMSE
wert_02
BREMSE_DRUCK
wert_01
KOMFORT_AUS_IN_50MS
wert_03
KLR_AUS_TIMEOUT
wert_03
KL30G_TIMEOUT
wert_01
SICHERHEITSFAHRZEUG
nicht_aktiv
HECKSCHEI_ENTR_OHNE_NR
nicht_aktiv
HECKSCHEIBE_ENTR_SENDER_1
nicht_aktiv
HECKSCHEIBE_ENTR_SENDER_2
nicht_aktiv
HECKSCHEIBE_ENTR_SENDER_3
nicht_aktiv
HECKSCHEIBE_ENTR_SENDER_4
nicht_aktiv
TOEHK_EO_HS_OHNE_NR
nicht_aktiv
TOEHK_EO_HS_SCHL_NR01
nicht_aktiv
TOEHK_EO_HS_SCHL_NR02
nicht_aktiv
TOEHK_EO_HS_SCHL_NR03
nicht_aktiv
TOEHK_EO_HS_SCHL_NR04
nicht_aktiv
HKAT_EO_HS_OHNE_NR
nicht_aktiv
HKAT_EO_HS_SCHL_NR01
nicht_aktiv
HKAT_EO_HS_SCHL_NR02
nicht_aktiv
HKAT_EO_HS_SCHL_NR03
nicht_aktiv
HKAT_EO_HS_SCHL_NR04
nicht_aktiv
FH_KINDERSICHERUNG
aktiv
ZV_DISFERTMODE
nicht_aktiv
ZV_DISTRANSMODE
aktiv
ZV_DISWERKSTMODE
nicht_aktiv
CLT_TASTE
aktiv
SPERRE_CRASH_ER
aktiv
VR_KLR
nicht_aktiv
VR_KLR_EINMALIG
nicht_aktiv
VR_GESCHW_EINMALIG
aktiv
SPERRE_HECKKLAPPE_KLR
nicht_aktiv
ER_TANKKLAPPE_SER
aktiv
ER_TANKKLAPPE_VR
aktiv
ER_KEYOUT_AUTOVR
nicht_aktiv
ENABLE_CLT_NACH_CRASH
nicht_aktiv
ZV_AUTHENTISIERUNG
nicht_aktiv
CCM_SEND_INVALID
nicht_aktiv
CRASH_SCHWERE
wert_02
CRASH_BESCHLEUNIGUNG
wert_01
VERRIEGELUNGSSCHWELLE
wert_04
GESCHW_SPERRE_TOEHK
wert_01
ZEIT_AUTO_ZV_VR
wert_01
VER_AUT_X_MIN_OHNE_NR
nicht_aktiv
VER_AUT_X_MIN_SENDER_1
aktiv
VER_AUT_X_MIN_SENDER_2
aktiv
VER_AUT_X_MIN_SENDER_3
nicht_aktiv
VER_AUT_X_MIN_SENDER_4
nicht_aktiv
VERRIEGEL_XKM/H_OHNE_NR
nicht_aktiv
VERRIEGELN_XKM/H_SENDER_1
nicht_aktiv
VERRIEGELN_XKM/H_SENDER_2
nicht_aktiv
VERRIEGELN_XKM/H_SENDER_3
nicht_aktiv
VERRIEGELN_XKM/H_SENDER_4
nicht_aktiv
FH_ECEFIN
nicht_aktiv
FH_ABSCHALTKRITERIUM
aktiv
FH_USACANADA
nicht_aktiv
FH_DISAKL15
nicht_aktiv
FH_DISAKLR
nicht_aktiv
KOMFORTOEFFNUNG_FB
aktiv
KOMFORTOEFFNUNG
aktiv
KOMFORTSCHLIESSUNG
aktiv
FH_RESETTIMEOUTKL50
aktiv
FH_TUERBED_EINSTG
nicht_aktiv
FH_SCHLIESSEN_EINSTG
nicht_aktiv
FH_DISTGDEFECT
aktiv
FH_KMFRTFBDTIM
aktiv
FH_DISCLSYDEFECT
aktiv
FH_DISFBDDEFCT
aktiv
FH_DISFERTMODE
aktiv
FH_DISTRANSMODE
aktiv
FH_DISWERKSTMODE
aktiv
KMFRT_OEFF_HINTEN
wert_01
KMFRT_OEFF_SHD
wert_01
KMFRT_SCHL_VORNE
wert_01
KOMFORT_SCHL_SHD
wert_01
ANSTEUERZEIT
wert_01
KMFRT_OEFFNEN
wert_01
KMFRT_SCHLIESSEN
wert_01
MIND_KMFRT_NACH_UNTERB
wert_01
MAX_KMFRT_UNTERB
wert_01
MAX_KMFRT_UNTERB_FBD
wert_01
SLEEPTIMER_FH_KLRAUS
wert_01
PERSONALISIERUNG_AUS
nicht_aktiv
SONDERTASTE_INNENLICHT
nicht_aktiv
FBD_AKTIV_KL15AUS
nicht_aktiv
FBD_AKTIV_KEYIN
aktiv
FBD_TESTKEY_AKTIV
nicht_aktiv
FBD_HECKKLAPPE_TOTZEIT
wert_02
FBD_PANIK_TOTZEIT
wert_01
FBD_MOTORLAUF
wert_01
FBD_MOTORSTART
wert_01
FBD_PANIKDAUER
wert_01
FBDIN_9_6_KBAUD
aktiv
MFS_KEY_PLGD
nicht_aktiv
FBD_DISFERTMODE
nicht_aktiv
FBD_DISTRANSMODE
nicht_aktiv
FBD_DISWERKSTMODE
nicht_aktiv
PA_CONFIG_FBDREFCHECK
nicht_aktiv
PA_TVRERFATH
wert_01
PA_TSPERRVR
wert_01
PA_TBEREITPE
wert_01
PA_ID_GEBER
wert_01
PA_FBD_REF
wert_01
PA_TBEREIT_PG
wert_01
CHIPCARD
aktiv
BOS_DATEN_ANFRAGEN
aktiv
FS_DATEN_ANFRAGEN
aktiv
SQCNT_UPDATE
nicht_aktiv
BEDINGUNG_CC_10KM
aktiv
EE_ZEIT_NLF
wert_01
EE_ZEIT_ABFR
wert_01
GESCHW_REQ_CC
wert_01
EWS_NACHLAUF_KLR_AUS
nicht_aktiv
EWS_FEHLER_MOTORLAUF
aktiv
EWS_SCHRITTWEITE_2
nicht_aktiv
MOTOR_HUBRAUM
n51b30
n52b30
n52kb30
n53b30
n54b30
m54b30
m57d30
n57d30
n62b30
LAENDERVARIANTE_BNDB
us
GETRIEBE_TYP
schrittschaltung
ANLASSSPERRE_BLS
aktiv
ES_EINMALIG_CLT
aktiv
SCHAERFEN/ENTSCHAERFEN
schloss_und_fernbedienung
CAN_MEHRFACH_SICHERN
aktiv
MOTORHAUBENKONTAKT
nicht_aktiv
ZV_SELEKTIV
aktiv
SEL_ZV_SENDER_1
nicht_aktiv
SEL_ZV_SENDER_2
nicht_aktiv
SEL_ZV_SENDER_3
aktiv
SEL_ZV_SENDER_4
aktiv
FH_SICHERHEITSFAHRZEUG
nicht_aktiv
FH_CABRIO_VERDECK_MODUL
nicht_aktiv
FH_HINTEN
aktiv
SCHIEBEHEBEDACH
aktiv
FH_DISASHD_KL15
nicht_aktiv
KOMFORTSCHLIESSUNG_FB
nicht_aktiv
KOMFORTSCHLIESSUNG_PA
nicht_aktiv
EINSTIEGSHILFE_OHNE_NR
nicht_aktiv
EINSTIEGSHILFE_SENDER_1
nicht_aktiv
EINSTIEGSHILFE_SENDER_2
nicht_aktiv
EINSTIEGSHILFE_SENDER_3
nicht_aktiv
EINSTIEGSHILFE_SENDER_4
nicht_aktiv
SONDERTASTE_PANIKALARM
nicht_aktiv
MOTORFERNSTART_GENERELL
nicht_aktiv
MOTORFERNSTART_CAN
nicht_aktiv
FBD_HSF_0
wert_09
FBD_HSF_1
wert_09
PASSIVE_ACCESS
nicht_aktiv
AUSWERTUNG_B_DRUCK
nicht_aktiv
AUSWERTUNG_P_CAN
aktiv
KLSTRG_DISFERTMODE
nicht_aktiv
KLSTRG_DISTRANSMODE
nicht_aktiv
KLSTRG_DISWERKSTMODE
nicht_aktiv
MFS_MIT_TON
nicht_aktiv
STARTDELAY_K_START
nicht_aktiv
EE_TRSP_CCM_0CD
aktiv
EE_TRSP_PERM
aktiv
FBD_SERVICEFKT_AKTIV
aktiv
DELAY_KL50L
wert_03
HK_ENABLE_OPEN
aktiv
ANLASSERSPERRE_KPS
nicht_aktiv
EE_TRSP_DEBUG
nicht_aktiv
KLSTRG_TESTER
nicht_aktiv
KOMFORT_EJECT
nicht_aktiv
PA_CHIPCARD_ACTIVE
aktiv
PA_DISABLE_HK_REV
nicht_aktiv
PA_HK_BACK_IR_SEARCH
nicht_aktiv
PA_HK_INTERIOR_SEARCH
nicht_aktiv
PA_HK_PGS_SEARCH
nicht_aktiv
PA_HK_REOPEN_CTL_DEP
aktiv
PA_HK_REOPEN_CTR_LOCK
nicht_aktiv
PA_HK_RSCR_ACTIVE
nicht_aktiv
PA_SILENTTIMEOUT
wert_01
ANLASSERSPERRE_P
aktiv
AUSWERTUNG_P_HW
aktiv
CLASS_PWR
klasse_1
DELAY_KLR_AUS
wert_02
STARTABBRUCH_P
aktiv
KLR_EIN_GESCHW
aktiv
ANLASSERSCHUTZ_3SEK
aktiv
SPERRE_KLRAUS_SST
nicht_aktiv
EINSTIEGSHILFE_DEFAULT
nicht_aktiv
EINSTIEGSHILFE_PORT
nicht_aktiv
PA_HK_REOPEN_INDICATE
aktiv
PA_HK_REV_ZYKL
aktiv
PA_MONITOR_ACTIVE
nicht_aktiv
RSSI_THRESHOLD
wert_02
SEL_ZV_SENDER_DEFAULT
aktiv
SEL_ZV_SENDER_PORT
aktiv
STARTWUNSCH_KL50
aktiv
VER_AUT_X_MIN_DEFAULT
nicht_aktiv
VER_AUT_X_MIN_PORT
nicht_aktiv
VERRIEGELN_XKM/H_DEFAULT
nicht_aktiv
VERRIEGELN_XKM/H_PORT
nicht_aktiv
TEST_DUTY_CYCLE
aktiv
FBD_HKL_NUR_ER
nicht_aktiv
PA_HA_SEARCH_ACTIVE
nicht_aktiv
KL15HW01_ALLWAYS
aktiv
PA_TRUNK_HIGH
aktiv
SENDMHKCCMLIMIT
wert_01
HS_ENABLE_OPEN
nicht_aktiv
HKL_LIFT_BEI_CA
nicht_aktiv
FHM_CA_OHNE_EKS
nicht_aktiv
FHM_CA_OHNE_EKS_DELAY
wert_01
HK_GESPERRT_IN_GESICHERT
nicht_aktiv
AUT_OFFNEN_HK_IN_ENTLPOS
nicht_aktiv
EWS_EGS
nicht_aktiv
CBS_VERSION
wert_03
KL30G_NACHLAUF_NACH_SZ1
wert_01
SCHLUESSELVARIANTE
wert_03
FH_KOMFORTF_MIT_SUBST
nicht_aktiv
ZEIT_KL50_ANSTRG
wert_03
ABZUGSPERRE_PLOCK_C6
aktiv
FBD_LOAD_POS_HK_HK
nicht_aktiv
FBD_LOAD_POS_LF_PING
nicht_aktiv
FBD_NO_LOAD_POS
aktiv
FH_RELEASE_CA_BASIC
nicht_aktiv
KL30G_EIN_HKT_AUSSEN_07
nicht_aktiv
KL30G_EIN_HKT_FBD_07
nicht_aktiv
KLR_AUS_TK
aktiv
KLSTRG_GRB_ID
wert_01
SPERRE_HKL_KEY_VALID_07
aktiv
SS_GETRIEBE_7
nicht_aktiv
STARTABBRUCH_KLR
nicht_aktiv
STARTDELAY_K_START_R5X
nicht_aktiv
TC_KL15_AUTO_OFF
aktiv
TC_KL15_AUTO_OFF_LIGHT
aktiv
TC_MSA_NO_KL15_AUTO_OFF
nicht_aktiv
TC_TIME_KL15_AUTO_OFF
wert_00
FBD_COMFORT_OPEN_LF_PING
nicht_aktiv
PA_TBEREIT_HK
wert_01
CCM_0X42_IM_NACHLAUF
nicht_aktiv
NLF_AUS_ALLE_TUEREN
nicht_aktiv
NEUES_FSE_KONZEPT
nicht_aktiv
PA_SUPERRANGE_R56
nicht_aktiv
PA_TAGE_REAR_RL_MIRROW
nicht_aktiv
PA_LF_PING_TAGE
nicht_aktiv
PA_MAUT_CLOSE_SILENT
nicht_aktiv
PA_SEARCH_HK_VORRASTE
nicht_aktiv
PA_SILENT_TO_4TAGE
nicht_aktiv
ELV_AUT_FCT
aktiv
ELV_RESET_FCT
aktiv
FH_RELEASE_TOP_ZWSTLG
nicht_aktiv
PA_HK_2SEARCH
aktiv
ELV_CCM_NEU
aktiv
PA_LF_PING_PGS
nicht_aktiv
HINTERE_TUEREN_MINI
nicht_aktiv
OSFG_MSA_NO_KL15_AUTO_OFF
aktiv
TC_KL15_AUTO_OFF_OSFG
nicht_aktiv
TC_NOT_P_NO_KL15_AUTO_OFF
aktiv
TIME_KL15_AUT_OFF_DR_OPEN
wert_01
HK_V_VER_MODUS
modus_00
TC_MSA_IGNORE_ENG_RUN
nicht_aktiv
Appreciate 0
      12-26-2013, 12:10 PM   #145
ksspacegray07
Lieutenant
United_States
7

 
Drives: 335is coupe
Join Date: Nov 2009
Location: NY


Posts: 525
iTrader: (1)

ok I've been at this post for hours without trying to post for help,

I have a 2011 335is, Running 32 bit Windows XP

I have a K+DCAN INPA Compatible cable (opened it up and it has 8 pins)
I have downloaded all the original links from the OP (running INPA version 5.0.1, EDIABAS 6.4.7, and NCSEXPER 3.1.0)

when i run INPA both circles are black, but when i try to communicate with the airbag i get an error...heard you could still code so i went ahead and followed the diy and got to the vin part and got this error:

VIN is faulty
COAPI-2000: EDIABAS or SGBD error
IFH-0003: DATATRANSMISSION TO INTERFACE DISTRUBED

I changed the latency to 1 and still nothing

someone please help I've been at this for hours
Appreciate 0
      01-07-2014, 07:14 PM   #146
saquibmiah
New Member
0

 
Drives: e90
Join Date: Aug 2013
Location: london


Posts: 13
iTrader: (0)

add man file on work folder first
Appreciate 0
      01-19-2014, 11:30 AM   #147
big_c
First Lieutenant
4

 
big_c's Avatar
 
Drives: 07 AW 335i Step
Join Date: Jun 2013
Location: MW


Posts: 312
iTrader: (2)

Ugh, getting the COAPI-2020 error, ECU does not answer: ECU busy repeat request when trying to read NFRM / RSMC
Appreciate 0
      02-03-2014, 02:34 PM   #148
big_c
First Lieutenant
4

 
big_c's Avatar
 
Drives: 07 AW 335i Step
Join Date: Jun 2013
Location: MW


Posts: 312
iTrader: (2)

Quote:
Originally Posted by big_c View Post
Ugh, getting the COAPI-2020 error, ECU does not answer: ECU busy repeat request when trying to read NFRM / RSMC
Anyone? Tried it with two different cables and two different laptops

Can't read other modules either
Appreciate 0
      02-06-2014, 09:58 PM   #149
big_c
First Lieutenant
4

 
big_c's Avatar
 
Drives: 07 AW 335i Step
Join Date: Jun 2013
Location: MW


Posts: 312
iTrader: (2)

So Im trying to recode an adaptive headlight module to my car to replace a shorted one. I cannot for the life of me get the coding to take. Every time I get the following errors:

I can read the VIN, ECU's, everything fine. I click execute job and it goes to coding active, then just errors out with coding is faulty. Ive tried two different cables. Two different laptops. Same results on other modules as well. Tried various profiles.

If anyone can please help me get this module coded I would be GREATLY appreciative


[20:29:57.468] [2014-02-06] [SERIE] 2020 PABD/CABD A_SMCKWR.IPS CodIndex2Lesen 495
[20:29:57.468] [2014-02-06] [SERIE] ECU does not answer FRM_87, ID_SMC_LESEN: ERROR_ECU_BUSY_REPEAT_REQUEST

[20:29:57.562] [2014-02-06] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[20:29:57.562] [2014-02-06] [SERIE] ECU does not answer CODIERINDEX_LESEN

================================================== ==============================(2)
[20:30:29.812] [2014-02-06] [SERIE] 2020 PABD/CABD A_SMCKWR.IPS CodIndex2Lesen 495
[20:30:29.812] [2014-02-06] [SERIE] ECU does not answer FRM_87, ID_SMC_LESEN: ERROR_ECU_BUSY_REPEAT_REQUEST

[20:30:29.921] [2014-02-06] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[20:30:29.921] [2014-02-06] [SERIE] ECU does not answer CODIERDATEN_LESEN
Appreciate 0
      02-07-2014, 10:51 PM   #150
big_c
First Lieutenant
4

 
big_c's Avatar
 
Drives: 07 AW 335i Step
Join Date: Jun 2013
Location: MW


Posts: 312
iTrader: (2)

Anyone?
Appreciate 0
      02-08-2014, 04:48 PM   #151
big_c
First Lieutenant
4

 
big_c's Avatar
 
Drives: 07 AW 335i Step
Join Date: Jun 2013
Location: MW


Posts: 312
iTrader: (2)

I have no problem accessing CAS. Just every time I access the FRM/NFRM it times out. What to check next?
Appreciate 0
      02-11-2014, 08:15 AM   #152
cryptomit
First Lieutenant
3

 
Drives: 330i
Join Date: Dec 2013
Location: Rotterdam


Posts: 330
iTrader: (0)

Do you have latency set to 1?
Appreciate 0
      02-16-2014, 11:35 AM   #153
deeterry13
Registered
0

 
Drives: 2011 328I
Join Date: Dec 2013
Location: sacramento


Posts: 1
iTrader: (0)

current Revtor profile and latest daten for 2011 e90

ive been looking all weekend for these files. i have tools 2.1 with everything installed and working on win 7 32bit. want to try to code a few things before road trip tomorrow... anybody want to share the latest Revtor profile and daten file???? PLEASE!!! im runnung out of time.....
Appreciate 0
      04-04-2014, 07:50 AM   #154
tdott
Lieutenant
8

 
Drives: M3
Join Date: Nov 2010
Location: T.Dot


Posts: 470
iTrader: (1)

Hoping someone can help.

I was able to successfully code my 08 M3, M3DSC, KOMBI, CAS, FRM, etc.
This was with NCS 3.0.1 with updated EDIABAS (forgot version).
50.2 Daten Files

Tried to code a friend's 09 335i and got this error:
I was able to read CAS, KOMBI, etc, but couldn't write/code it after making changes.
I got the error (see screenshot COAPI-2063 error)

Did some research, thought I needed to fully upgrade to BMW tools 2.12 and NCS 4.0.1, so I did that, loaded new profiles, make sure daten files were updated to 50.2.

Same error...

Any ideas?
I didn't view the error log at the time thinking it would be saved, but tried to view it now and now its gone. Can anyone help without the error log? or is it needed? I'd have to get my friend to come over again and try it once more.

32-bit Windows XP Laptop, clean install, nothing else on it. BMW Coding Tool used to update daten files.
Attached Images
 
__________________
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 06:06 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST