First... credit goes to RikuE90 for the Idea.. and one picture from his DIY.. since, i no longer have the unmodified Plate light housing.

and the difference between my DIY and RikuE90 is that my DIY does not require extra resistor to be solder on. The only modification need is modify...

I spent 45 bucks on 2 sets of Luxer1 12 led sets and my car still throws an error every other time, but only for like 5-10 secs now *sigh* waste of money

These bulbs probably aren't the perfected mod. I bought a set - they kick an intermittent bulb error at nearly every startup (goes away in like 5-10 seconds.)

Bulbs look great (maybe a little too bright), however, now one row of LEDS on one of the LED boards sorta flickers... I think these are made very cheap. I can almost stand the bulb message, but the flickering is unacceptable.

Back to stock bulbs until something better... OEM fixtures from an '08 would be great if someone figured out the resistance issues!

I'm with you on this my friend, I had the exact same issues. Eh, back to stockies for now...

Wire 33ohm (rated for 5W+ or it'll burn) in parallel with the OEM LEDs. no error codes. done.

I just put these in and they work great. Stock fitment, nice color, not too bright, and no resistors. Best of all, no error!!! (a little pricey though at $30+shipping, but otherwise perfect!)

http://cgi.ebay.com/ebaymotors/NO-ER...mZ250253623896

What's your car's build date?

E90 - 9/06

Hmm..I don't have any bulb error.. infact... i have whole bunch of LED in the car.. and has no bulb out error....

I will vouch for this set as well, this one works! My car would has thrown errors for the last 2 sets of led panels I've tried, but those work perfectly, no errors!
Happy Alex is Happy.

EDIT: apparently not, once you start driving, the error is there

i did this mod tonight.. everything went great, but I ended up getting the error.. :[

I only used the bulbs though, not the whole panel.. could that be the problem?

I have a 2006 325i..

help !

:]
Thanks!
Kristen

i put the piaa led license plate lights and i got the error message anyone know how i can get rid of the message or any help ful ideas

ok i bought the set from Bimmian, i had them ship me leds for the license plate also, (same one as the compartment) and now it throws a License Plate Bulb code. what led resistor would i need to wire in to get rid of the code? thanks for the help

I have just bought original LED License Plate Lights at BMW.
Part number is 63 26 7 193 293
Price: I paid in Poland ~12 USD each
Change is simple: take out old one and put a new one. Simple and easy

good find

does this work for pr-march 2007 production vehicles without any errors? im curious

I checked the part number on tischer site and it just said license plate light. Is it LED or just a replacement? and yeah I'm also curious if these would produce error codes for the 07 models.

I was wondering if anyone knew whether the install for the GP LEDs are the same as the LUX?

for angel eyes or?

nooo, for the license plate led, is it the same process as this tutorial?

http://www.e90post.com/forums/showthread.php?t=197437

the second item i believe... the GP LEDs

How do you take out, the blocks in the rear where the lights of the license plate are in? There are no screws in it. How do i pull them out?