Help - BMW 3-Series (E90 E92) Forum

WMAC6 · 01-19-2012, 09:59 AM

Hy guys i have 19\'s on my 07 335 now but found a rim I really think will set the car off perfectly...I want to step it up to a 20inch rim though...the guy from the company swears up and down that even though my car is lowered the offset he will make the rims will allow me to have the 20 without any rub...although I am a mod freak rims and offsets is somewhat of a weak point of my knowledge...any help????

edirtaynine · 01-19-2012, 01:14 PM

with conservative offsets (higher numbers) and width, the 20s will fit fine. since your car is lowered (depending on how low), it'll be a good idea to get the rear fenders rolled still. there are several guys here on 20s and they fit.

VMRWheels · 01-19-2012, 03:53 PM

We make 20s that can work with E90 and E92s without rubbing when the car is on factory suspension. We recommend a 20x9 ET35 and 20x10 ET35 on E90 pre-LCIs and E92s. One thing to really consider though is your tire sizing. While 20s can fit, when your car is lowered a lot of things change, like your alignment. I'd say that depending on what tire you end up going with, the size of the tire, etc. you could make them work.

WMAC6 · 01-20-2012, 09:14 AM

Thanks guys I'm ignorant when comes to tires and rims.....I just really believe the 20's will set the car off way better..thanks again

01-19-2012, 09:59 AM	#1
WMAC6 Private First Class Drives: 2007 335i Join Date: Aug 2011 Location: New York City Posts: 156 iTrader: (1)	Help Hy guys i have 19\'s on my 07 335 now but found a rim I really think will set the car off perfectly...I want to step it up to a 20inch rim though...the guy from the company swears up and down that even though my car is lowered the offset he will make the rims will allow me to have the 20 without any rub...although I am a mod freak rims and offsets is somewhat of a weak point of my knowledge...any help????
	Tweet

01-19-2012, 03:53 PM	#3
VMRWheels BimmerPost Supporting Vendor Drives: BMW Join Date: Jun 2007 Location: Anaheim, CA Posts: 9,711 iTrader: (4) Garage List 2008 5 Series [3.30]	We make 20s that can work with E90 and E92s without rubbing when the car is on factory suspension. We recommend a 20x9 ET35 and 20x10 ET35 on E90 pre-LCIs and E92s. One thing to really consider though is your tire sizing. While 20s can fit, when your car is lowered a lot of things change, like your alignment. I'd say that depending on what tire you end up going with, the size of the tire, etc. you could make them work. __________________ NEW WHEEL MODEL: V721 \| LIVE INVENTORY: V705 V703 V710 \| V710 PICTURE THREAD p. 714-442-7916 extension 103 \| e. kevin.a@velocitymotoring.com \| f. facebook.com/vmrwheels f. flickr.com/vmrwheels

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

01-19-2012, 01:14 PM	#2
edirtaynine Major General Drives: e92 Join Date: Mar 2011 Location: SoCal Posts: 5,128 iTrader: (0)	with conservative offsets (higher numbers) and width, the 20s will fit fine. since your car is lowered (depending on how low), it'll be a good idea to get the rear fenders rolled still. there are several guys here on 20s and they fit.

01-20-2012, 09:14 AM	#4
WMAC6 Private First Class Drives: 2007 335i Join Date: Aug 2011 Location: New York City Posts: 156 iTrader: (1)	Thanks guys I'm ignorant when comes to tires and rims.....I just really believe the 20's will set the car off way better..thanks again