E90Post
 


 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > **627WHP@22.5psi** Vishnu/FFTEC Single Turbo System Dyno Session #3 (PROcede Tuned)



Closed Thread
 
Thread Tools Search this Thread
      02-22-2012, 01:42 AM   #1
OpenFlash
United_States
1731
Rep
17,960
Posts

Drives: A Lot
Join Date: Sep 2006
Location: SF Bay, CA

iTrader: (0)

Garage List
Exclamation **627WHP@22.5psi** Vishnu/FFTEC Single Turbo System Dyno Session #3 (PROcede Tuned)

BIMMERPOST
     Featured on BIMMERPOST.com
Hi guys,
Just got back from our 3rd dyno tuning session. So far, our single turbo system tuning sessions is coming along quite nicely. Today we returned to the same dyno we used a few days ago when we put down 585whp. Still running 94oct pump plus PWM Methanol. This time, we removed the 20psi boost limit that handicapped us before. And with boost at 16psi at 4000RPM tapering upwards to 22.5psi by 6500rpm, it put down this without any muss or fuss:



And video. Sounds awesome. Funny how the front end of the car lifts up


We only did 3 pump+meth runs today. The first two ran a peak of 21psi and made 600-602whp at 20-21psi peak boost. By just adding another 1.5psi up top, it picked up another 25WHP. Pretty astonishing how much power the car is picking up with with incremental changes in boost pressure now that the turbo is operating at it's sweet spot. The turbo itself should still have another ~100hp left in it

So far, fuel system is well within its limits. Fuel trims aren't even closed to being maxed out. I suspect we will limits right around 660-675whp. Which is nice since we still have one more upgrade to make which should support well over 800whp by my calculations. Still no misfire. Still no signs of knock retard. Everything is looking and sounding beautiful. AFR via external wideband AFR is still in the low 12s.

Not much to say other than the car is an absolute BEAST. Probably the fastest street car I've ever driven. Should run mid 10s if I can move that shifter fast enough. Traction is AMAZINGLY GOOD. No doubt because we purposely keeping torque reasonably low (~470lbft) and flat (as a table). 3rd gear and up gets full traction without any drama. Sometimes you get some minor tire scrabble at the top of 3rd gear if the road isn't perfectly smooth. But even that is still very manageable. FWIW, the car is running 265mm wide Bridgestone RE11s with m3 bushings/arms and Koni FSD shocks.

And the Procede is doing an incredible job of keeping things safe and stable. We have incorporated a very slick form of lean-run protection. And even more sophisticated methanol control logic. Both will be released later this week as a firmware update for everyone to use. And as always, boost control is rock solid. Peak WGDC is still only 50% at 6500rpm/22.5psi. No unwanted throttle closure. No boost oscillations. No AFR lag/delay. No smoke out the tailpipe. No wastegate rattle. No turbo siren. Just insane how it is able to manage a 630whp engine just as easily as it is able to manage a 500whp engine.

Cheers,
Shiv

PS. We did a couple pump gas (94oct) runs with NO meth. Still some more tuning to do. But pretty promising start:


PSS. Our car was shown at WekFest this past weekend. Look what she won

Last edited by OpenFlash; 02-22-2012 at 05:00 AM..
Appreciate 0
      02-22-2012, 01:44 AM   #2
Aridk
Lieutenant
Aridk's Avatar
Denmark
7
Rep
520
Posts

Drives: 335i
Join Date: Jan 2008
Location: Denmark

iTrader: (0)

This is getting more and more impressive by the day

Edit;

You say still another 100hp in there? will your fuelupgrade be able to suport this? and Your plan for getting there Is that "just" add 1,5 -2 extra psi?

Last edited by Aridk; 02-22-2012 at 01:54 AM..
Appreciate 0
      02-22-2012, 01:50 AM   #3
Fundahl
Captain
United_States
8
Rep
704
Posts

Drives: VO 1M, 300zx TT
Join Date: Mar 2011
Location: Corpus Christi, Texas

iTrader: (0)

Wow...

The N54 is proving to be more and more awesome.... and still room left to go.
Appreciate 0
      02-22-2012, 01:51 AM   #4
Proper Motion LLC
Custom Powder Coater
Proper Motion LLC's Avatar
147
Rep
2,784
Posts

Drives: White 335i Sedan
Join Date: Dec 2008
Location: Orange County CA

iTrader: (2)

God damn, ur going to need some 275 Nitto/Toyo semi slicks soon!
__________________
Appreciate 0
      02-22-2012, 01:52 AM   #5
335iJWC
~~~
United_States
24
Rep
592
Posts

Drives: JB 335i-M3
Join Date: Feb 2010
Location: Simi Valley

iTrader: (4)

Garage List
2008 BMW 335i  [9.00]


There is no doubt you continue to exceed expectations!!!!!!!!!!!

Im seriously considering this, is pricing on the horizon!
__________________
.
................
Appreciate 0
      02-22-2012, 01:54 AM   #6
AcExSpades
Lieutenant
AcExSpades's Avatar
Peru
74
Rep
565
Posts

Drives: 11 MW E92 M3
Join Date: Dec 2010
Location: CNJ

iTrader: (7)

Garage List
2011 BMW M3  [0.00]
2006 Subaru WRX STi  [0.00]
Holy crap guys! Very nice update.

I was going to get COBB, but I'm thinking Procede now
Appreciate 0
      02-22-2012, 01:57 AM   #7
SIKH335
Banned
28
Rep
969
Posts

Drives: 2007 335i Coupe
Join Date: May 2011
Location: SF Bay Area

iTrader: (6)

Garage List
2007 E92 335i  [1.00]
at a boy!!!!!! Thats some solid numbers!!!! The turbo sounds so Sexy !!!
Appreciate 0
      02-22-2012, 01:58 AM   #8
venom3469
First Lieutenant
venom3469's Avatar
United_States
46
Rep
337
Posts

Drives: 08 AW/R 6MT 335i, YZF-R6.
Join Date: May 2011
Location: Florence, Alabama

iTrader: (0)

This is amazing!! Great work Shiv!
__________________
08 335i Alpine White/Coral Red Interior With A PROcede Tune!! 09 Yamaha R6!!
Appreciate 0
      02-22-2012, 01:59 AM   #9
99three
Banned
23
Rep
838
Posts

Drives: 993, e92, e36, F355, Z32, Jag
Join Date: Sep 2010
Location: in the 416

iTrader: (3)

That is amazing progress Shiv. You mentioned that you are keeping torque low at this point, but I'm curious if you are able to move torque earlier in the RPM band for the folks that like to feel that kick a few hundred RPM's sooner. How are you able to fatten/lean your fuel and can you please elaborate the lean run protection you've implemented? Good job!
Appreciate 0
      02-22-2012, 02:00 AM   #10
TMR
Brigadier General
TMR's Avatar
United_States
393
Rep
3,161
Posts

Drives: M3
Join Date: Jun 2008
Location: Torrance

iTrader: (12)

Awesome work. absolutely awesome. now you are making me want to sell the M and gets a 335i again.
__________________
2015 M3 BPM Tuned, Eibach, Magnaflow and more www.tmrmzine.com/m3/f80
SOLD E92 Slēk Carbon Fiber Widebody M3 www.tmrmzine.com/m3/slek/
SOLD E92 335i Stage 3+ with all the toys www.tmrmzine.com/335/
SOLD E39 M5 Modded, What a great car! www.tmrmzine.com/m5/
Appreciate 0
      02-22-2012, 02:02 AM   #11
M3_WC
Brigadier General
1040
Rep
3,622
Posts

Drives: M3
Join Date: Jun 2009
Location: CA

iTrader: (0)

Did you get in any pump only runs like you said you would do? Like to see what your fuel solution is doing without meth.
Appreciate 0
      02-22-2012, 02:03 AM   #12
werke-t
Captain
47
Rep
731
Posts

Drives: 2020 X3M Competition
Join Date: Apr 2009
Location: Sarasota, FL

iTrader: (5)

Omg shit just got real...

Why did I just buy downpipes.... Lol... Seriously...

Amazing work! Glad I went the Vishnu route

Last edited by werke-t; 02-22-2012 at 02:25 AM..
Appreciate 0
      02-22-2012, 02:03 AM   #13
pentaxis
Captain
pentaxis's Avatar
United_States
30
Rep
685
Posts

Drives: Space Grey E92 335i
Join Date: Feb 2010
Location: Portland, OR

iTrader: (3)

So awesome. I am excited to see what kind of boost this block can handle, and what power can be made!

Last edited by pentaxis; 02-22-2012 at 02:23 AM..
Appreciate 0
      02-22-2012, 02:05 AM   #14
OpenFlash
United_States
1731
Rep
17,960
Posts

Drives: A Lot
Join Date: Sep 2006
Location: SF Bay, CA

iTrader: (0)

Garage List
Quote:
Originally Posted by M3_WC View Post
Did you get in any pump only runs like you said you would do? Like to see what your fuel solution is doing without meth.
Yes, pump only made 505whp . I'll post those runs up later.
Appreciate 0
      02-22-2012, 02:07 AM   #15
TMR
Brigadier General
TMR's Avatar
United_States
393
Rep
3,161
Posts

Drives: M3
Join Date: Jun 2008
Location: Torrance

iTrader: (12)

Is this done on the same Proceed Rev 3 many of us already have or a custom one? Cause if its the same one everyone else has, this goes to show how well the proceed tuned cars are being safely ran up to higher levels on these cars.
__________________
2015 M3 BPM Tuned, Eibach, Magnaflow and more www.tmrmzine.com/m3/f80
SOLD E92 Slēk Carbon Fiber Widebody M3 www.tmrmzine.com/m3/slek/
SOLD E92 335i Stage 3+ with all the toys www.tmrmzine.com/335/
SOLD E39 M5 Modded, What a great car! www.tmrmzine.com/m5/
Appreciate 0
      02-22-2012, 02:09 AM   #16
M3_WC
Brigadier General
1040
Rep
3,622
Posts

Drives: M3
Join Date: Jun 2009
Location: CA

iTrader: (0)

Quote:
Originally Posted by shiv@vishnu View Post
Yes, pump only made 505whp . I'll post those runs up later.
Nice, Doing a great job with this kit.
Appreciate 0
      02-22-2012, 02:09 AM   #17
OpenFlash
United_States
1731
Rep
17,960
Posts

Drives: A Lot
Join Date: Sep 2006
Location: SF Bay, CA

iTrader: (0)

Garage List
Quote:
Originally Posted by TMR View Post
Is this done on the same Proceed Rev 3 many of us already have or a custom one? Cause if its the same one everyone else has, this goes to show how well the proceed tuned cars are being safely ran up to higher levels on these cars.
Yes, same exact Rev3 Procede that thousands of you guys run
Appreciate 0
      02-22-2012, 02:14 AM   #18
Jimefam
Second Lieutenant
12
Rep
226
Posts

Drives: 2011 550I Msport
Join Date: Jul 2010
Location: Cumming, Ga

iTrader: (0)

Wow shiv congrats on the awesome numbers and putting to rest alot of the DI weakness talk. Hopefully I'll get to see what you can do with 50% more displacement and two more cylinders somewhat soon
Appreciate 0
      02-22-2012, 02:24 AM   #19
SIKH335
Banned
28
Rep
969
Posts

Drives: 2007 335i Coupe
Join Date: May 2011
Location: SF Bay Area

iTrader: (6)

Garage List
2007 E92 335i  [1.00]
Im sitting here thinking what the hell am I gonna go with 187whp more and all I can do is Grin!!!!!!
Appreciate 0
      02-22-2012, 02:28 AM   #20
Mr_PharmD
Major
43
Rep
1,030
Posts

Drives: 335i coupe
Join Date: Mar 2011
Location: Fresno

iTrader: (19)

man, i was happy with 585 but 6XX is incredible. I cant wait to see the numbers on the AT.
Appreciate 0
      02-22-2012, 02:29 AM   #21
lpphreakx06
Professional Moose Racer
lpphreakx06's Avatar
Vietnam
316
Rep
7,509
Posts

Drives: SG 335i E92 RIP + 2015 SS M3
Join Date: Jul 2008
Location: Bellevue, Wa

iTrader: (25)

nice!!
__________________
Visit my blog anytime: http://www.sfpayments.com

BMW Dream Team PNW Chapter, member #1
|HP Autowerks | AR DESIGN | BMW PERFORMANCE | STOP TECH | Volk Racing| AMS | ARKYM
Appreciate 0
      02-22-2012, 02:30 AM   #22
E92ML
Captain
E92ML's Avatar
United_States
33
Rep
886
Posts

Drives: E92 2008 335xi Coupe
Join Date: May 2011
Location: Bellevue, WA

iTrader: (0)

Wow that is some serious power! Nice work guys
__________________

Performance: JB4 ECU, CP-E DP's, WW BMS Meth Kit, AR meth elbow, BMS DCI, AFE Intake Scoops,
Exterior: Enkruez 19" H8R, H&R Spacers, Aero Lip, Tint, ACS Roof Spoiler, HID AE's, HID Fogs, Black Grills, Sport Pedals
Appreciate 0
Closed Thread

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:45 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST