19x10.5 rear - BMW 3-Series (E90 E92) Forum

335_MI6 · 02-23-2012, 02:34 PM

will 10.5 in the back work on a XI. Im currently on m6 rep with 8.5 and 9.5

want to get 19x9 ET 28 (front) 19x10.5 ET 28 (rear)

Eugeinus · 02-23-2012, 10:54 PM

I think you'll be rubbing if your fenders aren't rolled. Are you running stock suspension or lowered?

335_MI6 · 02-24-2012, 12:42 PM

Im running kw v3 and they are slammed in the rear.

phozenstone · 02-24-2012, 02:52 PM

i ran 19x10.5 32 offset with 275/30/19 lowered on Eibach's before. Rubbed slightly but nothing a slight fender roll couldn't fix!

335_MI6 · 02-24-2012, 07:52 PM

Quote:

Originally Posted by phozenstone

i ran 19x10.5 32 offset with 275/30/19 lowered on Eibach's before. Rubbed slightly but nothing a slight fender roll couldn't fix!

do you think i can run a 265/30/19 in the rear with 10.5 and how did the awd system take it

Alpineweiss e90 · 02-27-2012, 03:48 PM

The general rule is to keep the rolling diameters of the font and rear tires within 1% of each other.

But I'm not 100% convinced this is a mandatory guideline. For starters, BMW provided Canada spec models with a staggered option from the factory on XI models. Also, the transfer case has a multi-clutch setup that should match different speeds.

VMRWheels · 02-27-2012, 03:53 PM

From my experience, most people with AWD prefer running a square setup versus a staggered. Something to consider.

A 10.5 should fit with a fender roll and/or pull with a 265 or 275. Be sure to post pictures once you're done. Good luck!

335_MI6 · 03-01-2012, 05:58 PM

bump, im about to get a set of 19x9 ET 28 (front) 19x10.5 ET 28 (rear)

~XxTeexX~ · 03-01-2012, 06:03 PM

225/35 F @ -.85
255/30 R @ -2.4 w/roll

.7 % difference

done

335_MI6 · 03-01-2012, 08:01 PM

Quote:

Originally Posted by StretchNpoke

225/35 F @ -.85
255/30 R @ -2.4 w/roll

.7 % difference

done

english please lol........ thanks bro

~XxTeexX~ · 03-01-2012, 08:12 PM

iirc v3's dont cum with front camber plates. Remove the pin to gain -.3 front camber (just taking rubbing precautions) total -.85 fronts.

max out the rear camber at -2.4

dont worry about your xi trans being youre under the 1% rule (.7% difference front n rear tire rolling diameter).

255.30 will be an easy fit with a nice rolled fender.

terbow2 · 03-23-2012, 09:10 AM

So if I buy a set of OEM style 95's which I believe have an offset of 24 would I have to but camber plates also and max it out? Was thinking about running 235/35/19 in the front and 265/30/19 in the rear

mashimarho · 03-23-2012, 09:57 AM

Quote:

Originally Posted by StretchNpoke

iirc v3's dont cum with front camber plates. Remove the pin to gain -.3 front camber (just taking rubbing precautions) total -.85 fronts.

max out the rear camber at -2.4

dont worry about your xi trans being youre under the 1% rule (.7% difference front n rear tire rolling diameter).

255.30 will be an easy fit with a nice rolled fender.

StrechNPoke has got it down to science yo.

Fatal_Attraction · 03-25-2012, 02:40 PM

running 10 will give you rubbing, depends on drop also. DO roll your fenders, you will notice a world of a difference immediately

Fatal_Attraction · 03-25-2012, 02:41 PM

Quote:

Originally Posted by terbow2

So if I buy a set of OEM style 95's which I believe have an offset of 24 would I have to but camber plates also and max it out? Was thinking about running 235/35/19 in the front and 265/30/19 in the rear

running this w. no problem on vossens ; just roll fenders

terbow2 · 03-27-2012, 10:58 AM

Quote:

Originally Posted by ///F8al_Addixon

running 10 will give you rubbing, depends on drop also. DO roll your fenders, you will notice a world of a difference immediately

I'm just going to drop on H&R sports with stock shocks an struts for now. I'll definitely look into rolling fenders now because I don't want to be rubbing all the time

02-23-2012, 02:34 PM	#1
335_MI6 Colonel Drives: 335xi Join Date: May 2011 Location: DC/MIAMI/LONDON Posts: 2,008 iTrader: (1)	19x10.5 rear will 10.5 in the back work on a XI. Im currently on m6 rep with 8.5 and 9.5 want to get 19x9 ET 28 (front) 19x10.5 ET 28 (rear) __________________ Epacy2: "335=M3?" THE TECH: "Only 335 guys think so." Last edited by 335_MI6; 03-01-2012 at 05:58 PM.
	Tweet

02-24-2012, 12:42 PM	#3
335_MI6 Colonel Drives: 335xi Join Date: May 2011 Location: DC/MIAMI/LONDON Posts: 2,008 iTrader: (1)	Im running kw v3 and they are slammed in the rear. __________________ Epacy2: "335=M3?" THE TECH: "Only 335 guys think so."

02-24-2012, 02:52 PM	#4
phozenstone Brigadier General Drives: 2007 E92 Montego Blue Join Date: Apr 2007 Location: NY Posts: 4,492 iTrader: (64)	i ran 19x10.5 32 offset with 275/30/19 lowered on Eibach's before. Rubbed slightly but nothing a slight fender roll couldn't fix! __________________ E92 Xdrive / Montego Blue / M3 Black Novillo Leather / OEM M3 220 19" Wheels / Mtech Rear w/ IS Diffuser / Aero Lip / LCI Tailights / M3 Steering Wheel w/Paddles / 40% Huper Optik / Lux V3 / 4300K HID Fogs / Dynavin D99 / 3 Stage Intake Manifold / Magnaflow Dual Exhaust Conversion 4" Tips / K&N Filter w/ charcoal delete / Active Autowerke Stage 2 Tune / KW V1 Coilovers / BMW Performance Strut Bar

02-27-2012, 03:53 PM	#7
VMRWheels BimmerPost Supporting Vendor Drives: BMW Join Date: Jun 2007 Location: Anaheim, CA Posts: 9,712 iTrader: (4) Garage List 2008 5 Series [3.30]	From my experience, most people with AWD prefer running a square setup versus a staggered. Something to consider. A 10.5 should fit with a fender roll and/or pull with a 265 or 275. Be sure to post pictures once you're done. Good luck! __________________ NEW WHEEL MODEL: V721 \| LIVE INVENTORY: V705 V703 V710 \| V710 PICTURE THREAD p. 714-442-7916 extension 103 \| e. kevin.a@velocitymotoring.com \| f. facebook.com/vmrwheels f. flickr.com/vmrwheels

03-01-2012, 05:58 PM	#8
335_MI6 Colonel Drives: 335xi Join Date: May 2011 Location: DC/MIAMI/LONDON Posts: 2,008 iTrader: (1)	bump, im about to get a set of 19x9 ET 28 (front) 19x10.5 ET 28 (rear) __________________ Epacy2: "335=M3?" THE TECH: "Only 335 guys think so."

02-23-2012, 10:54 PM	#2
Eugeinus Captain Drives: 10' E90 335i XDrive Join Date: Jan 2011 Location: DC/NOVA Posts: 825 iTrader: (8)	I think you'll be rubbing if your fenders aren't rolled. Are you running stock suspension or lowered?

02-27-2012, 03:48 PM	#6
Alpineweiss e90 Banned Drives: AW 330xi Join Date: Feb 2012 Location: . Posts: 220 iTrader: (0)	The general rule is to keep the rolling diameters of the font and rear tires within 1% of each other. But I'm not 100% convinced this is a mandatory guideline. For starters, BMW provided Canada spec models with a staggered option from the factory on XI models. Also, the transfer case has a multi-clutch setup that should match different speeds.

03-01-2012, 06:03 PM	#9
~XxTeexX~ attention whore Drives: yes Join Date: Oct 2011 Location: Socal Posts: 2,998 iTrader: (0)	225/35 F @ -.85 255/30 R @ -2.4 w/roll .7 % difference done __________________ #TeamStretchNpoke join the aggressive movement! JTILAK07,seanphan,project335i,SoCal BimMn,Mahhvinn,kkakonn

03-01-2012, 08:12 PM	#11
~XxTeexX~ attention whore Drives: yes Join Date: Oct 2011 Location: Socal Posts: 2,998 iTrader: (0)	iirc v3's dont cum with front camber plates. Remove the pin to gain -.3 front camber (just taking rubbing precautions) total -.85 fronts. max out the rear camber at -2.4 dont worry about your xi trans being youre under the 1% rule (.7% difference front n rear tire rolling diameter). 255.30 will be an easy fit with a nice rolled fender. __________________ #TeamStretchNpoke join the aggressive movement! JTILAK07,seanphan,project335i,SoCal BimMn,Mahhvinn,kkakonn

03-23-2012, 09:10 AM	#12
terbow2 Private Drives: 2007 328xi Join Date: Jun 2011 Location: VA BCH Posts: 56 iTrader: (0)	So if I buy a set of OEM style 95's which I believe have an offset of 24 would I have to but camber plates also and max it out? Was thinking about running 235/35/19 in the front and 265/30/19 in the rear

03-25-2012, 02:40 PM	#14
Fatal_Attraction Fatal Addiction * Drives: 2009 328i xDrive Join Date: Jan 2012 Location: Nassau, NY Posts: 23 iTrader: (0) Garage List 2010 BMW 328i xDrive [0.00]	running 10 will give you rubbing, depends on drop also. DO roll your fenders, you will notice a world of a difference immediately __________________ \| 2009 e90 328i xDrive \| Space Grey \| Vogtland LS \| 19" CV1

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search