Dension Gateway 500 - NO SOUND - BMW 3-Series (E90 E92) Forum

LuZar · 05-12-2012, 06:22 PM

Hello friends! I'm from Brazil so, sorry about my english... I own a 2007 E90 335i sedan whit professional iDrive, front cd/dvd slot and cdc in trunk. I installed the Dension Gateway Most 500 today but it didn't work out. It reads the ipod/iphone tracks, but no sound is heard, even when you change to cd, dvd, fm. When you switch off, the sound comes again, but now you don't have the ipod/iphone tracks. When you switch on, when the light is blinking, the sounds works, but when the light stop blinking and remains on the sound stops... i have tried all the possible connections but nothing happens...Anyone can help me with this issue? Tks a lot!

superjay · 05-12-2012, 09:01 PM

check to be sure your Fiber Loop is in the correct order, and that all fiber connections are solid, and aligned.

LuZar · 05-12-2012, 09:23 PM

Quote:

Originally Posted by superjay

check to be sure your Fiber Loop is in the correct order, and that all fiber connections are solid, and aligned.

Do i have to use a loop? Can you explain a little more please?
Tks

superjay · 05-12-2012, 11:42 PM

in the installation manual you'll see where you have to split the fiber loop to include the gateway. Look at installation type 2a if you have a CDC, and installation type 3a if you do not have a CDC

http://www.pac-audio.com/PACProductD...ual_090210.pdf

you will need to pull one side of the fiber harness open to send it to the gateway. Make sure all fiber terminations are aligned correctly, and are not "misfiring".

LuZar · 05-13-2012, 08:19 AM

Tks superjay! I don't know what is correct now because my install manual shows the dip switch like this: 1off 234on and the rest off.... This manual you posted is the last one (recent)? Tks again!

superjay · 05-13-2012, 11:45 AM

Glad I could help

superjay · 05-13-2012, 11:56 AM

go off the one I posted. That is the most current install guide posted on the Dension site

LuZar · 05-16-2012, 10:37 AM

Hi all!
Just one thing: dont't follow Dension manual-install guide.
I follow an other diagram install and everything works.
Tks for fórum support and to BMSilicon

Regards

toicy4ya · 06-22-2012, 10:55 PM

Im interested in purchasing a Denison iPod integration however I am confused as to which one I need to get. I have a 06 330XI, can you tell me which is the correct model I need to get? I have navigation w/ IDrive however I do not have a cd changer. Any feedback would be greatly appreciated.

Thanks

05-12-2012, 06:22 PM	#1
LuZar New Member Drives: 2007 e90 335i sedan Join Date: Jan 2012 Location: Brazil Posts: 8 iTrader: (0)	Dension Gateway 500 - NO SOUND Hello friends! I'm from Brazil so, sorry about my english... I own a 2007 E90 335i sedan whit professional iDrive, front cd/dvd slot and cdc in trunk. I installed the Dension Gateway Most 500 today but it didn't work out. It reads the ipod/iphone tracks, but no sound is heard, even when you change to cd, dvd, fm. When you switch off, the sound comes again, but now you don't have the ipod/iphone tracks. When you switch on, when the light is blinking, the sounds works, but when the light stop blinking and remains on the sound stops... i have tried all the possible connections but nothing happens...Anyone can help me with this issue? Tks a lot!
	Tweet

05-12-2012, 09:01 PM	#2
superjay Resident Car Audio Guru Drives: 2007 E93 335i Join Date: May 2012 Location: Rancho Cucamonga, CA Posts: 591 iTrader: (0)	check to be sure your Fiber Loop is in the correct order, and that all fiber connections are solid, and aligned. __________________ It's not about how much power you have, it's about how well you use it.

05-12-2012, 11:42 PM	#4
superjay Resident Car Audio Guru Drives: 2007 E93 335i Join Date: May 2012 Location: Rancho Cucamonga, CA Posts: 591 iTrader: (0)	in the installation manual you'll see where you have to split the fiber loop to include the gateway. Look at installation type 2a if you have a CDC, and installation type 3a if you do not have a CDC http://www.pac-audio.com/PACProductD...ual_090210.pdf you will need to pull one side of the fiber harness open to send it to the gateway. Make sure all fiber terminations are aligned correctly, and are not "misfiring". __________________ It's not about how much power you have, it's about how well you use it.

05-13-2012, 11:45 AM	#6
superjay Resident Car Audio Guru Drives: 2007 E93 335i Join Date: May 2012 Location: Rancho Cucamonga, CA Posts: 591 iTrader: (0)	Glad I could help __________________ It's not about how much power you have, it's about how well you use it.

05-13-2012, 11:56 AM	#7
superjay Resident Car Audio Guru Drives: 2007 E93 335i Join Date: May 2012 Location: Rancho Cucamonga, CA Posts: 591 iTrader: (0)	go off the one I posted. That is the most current install guide posted on the Dension site __________________ It's not about how much power you have, it's about how well you use it.

05-13-2012, 08:19 AM	#5
LuZar New Member Drives: 2007 e90 335i sedan Join Date: Jan 2012 Location: Brazil Posts: 8 iTrader: (0)	Tks superjay! I don't know what is correct now because my install manual shows the dip switch like this: 1off 234on and the rest off.... This manual you posted is the last one (recent)? Tks again!

05-16-2012, 10:37 AM	#8
LuZar New Member Drives: 2007 e90 335i sedan Join Date: Jan 2012 Location: Brazil Posts: 8 iTrader: (0)	Hi all! Just one thing: dont't follow Dension manual-install guide. I follow an other diagram install and everything works. Tks for fórum support and to BMSilicon Regards

06-22-2012, 10:55 PM	#9
toicy4ya Second Lieutenant Drives: 06 BMW 330XI Join Date: Mar 2012 Location: NYC Posts: 275 iTrader: (0)	Im interested in purchasing a Denison iPod integration however I am confused as to which one I need to get. I have a 06 330XI, can you tell me which is the correct model I need to get? I have navigation w/ IDrive however I do not have a cd changer. Any feedback would be greatly appreciated. Thanks __________________ 2006 330XI BSM, Terra Cotta Leather Interior, ZSP, ZPP, ZWP, ZCV, Comfort Access, Adaptive Xenon, Steptronic, Logic 7, Nav w/ IDrive

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search