E90Post
 


Alpine HID
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > CMGS with Aquamist Flow Sensor help



Reply
 
Thread Tools Search this Thread
      07-31-2013, 11:29 PM   #1
ZTZ1010
Captain Planet
 
ZTZ1010's Avatar
 
Drives: 11' E92 ZCP M3
Join Date: Feb 2008
Location: CT

Posts: 1,051
iTrader: (8)

Garage List
2009 BMW 335i  [4.80]
2011 BMW M3  [0.00]
Send a message via AIM to ZTZ1010
CMGS with Aquamist Flow Sensor help

Wired up the HE505 aqm flow sensor and now the CMGS won't open the solenoid, aka there is no meth flow from the solenoid to the injectors. I spoke to CM and they told me to reset controller defaults, which I did, but to no avail. I looked at their install PDF's and can't seem to find anything helpful. Flow sensor is wired correctly, as JB4 sees flow, and I have a fully pressurized line going from the flow sensor to the solenoid. Then, from the solenoid to the injectors, lines don't get flow.

When i installed the AQM sensor, I bypassed the CMGS all together by running the AQM sensor directly to the JB4 (FSB style) and gave it power/ground independently. I'm not sure how to make the CMGS open the solenoid, which is really the issue at hand. i still have the old flow sensor wired in, but disconnected from meth lines and unplugged. with the failsafe on the CMGS 'off' (which was done when system was set to default), CMGS should ignore the lack of flow, and inject based solely on boost. Not sure why solenoid would remain closed if pump is on, primed, and flowing...

Any help would be spectacular
__________________
2011.5 Alpine White E92 M3 | DCT w/ BPM Software | ZCP | CF Roof | CF Lip| Fully Coded | AFE Stage 2 Intake| ACM Exhaust | ACM Test Pipes | BPM Stage II Dev Tune | AA Pulleys | RPi Scoops | Swift Springs | LED Interior Lights| LUX V4 | Extended Aluminum DCT Paddles|
ZTZ1010 is offline   United_States
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:28 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST