[Apple4life]

Instead of using one of those ugly tablet mounts for cars, I used velcro.

It costs $3 at Home Depot.




For music playback, I use PowerAmp


Wirelessly stream music to the car stereo using this bluetooth device


This is my first thread and I just wanna share this with you guys

[Sean@PYSpeed.com]

Nice setup! Only thing would be having internet access on it.

[reolonaapp]

show us some pictures...

[makkan00]

I guess we could mount the ipad mini there same as you did.
If you buy a holder, you can fit it b/w central silver trim and the part of dashboard above it. (Same principle as to mount BMW nuvi satnav holder).

[torifile]

Does it bounce around while you're driving? I'm thinking of getting one of those form fitting cases for my mini and putting the velcro on that and leaving it in the car.

[Apple4life]

Originally Posted by Sean@PYSpeed.com

Nice setup! Only thing would be having internet access on it.

I tether the tablet to my phone so I can use Waze.

Originally Posted by torifile

Does it bounce around while you're driving? I'm thinking of getting one of those form fitting cases for my mini and putting the velcro on that and leaving it in the car.

It doesn't bounce around at all.

[frenchno4]

nm

[vanondemand]

I use the belkin aircast too, awesome device to turn your car with aux into a bluetooth enabled vehicle. Tobad they are discontinued and I can't get them at work anymore

[cdgatti]

Good reports on this board on the Griffin Blue trip. Maybe a solution to replace your Belkin.

[geko29]

Think I'm going to do this with an iPad mini. See if I can get away without installing a mount.

[geko29]

Originally Posted by geko29

Think I'm going to do this with an iPad mini. See if I can get away without installing a mount.

Don't know if it's that the back of the mini is flatter than the one on the Galaxy Tab, but just mocking it up, I can't find a spot above the air vents where it feels like it will attach and be stable, due to the complex curvature of the dash.

[torifile]

Originally Posted by geko29

Think I'm going to do this with an iPad mini. See if I can get away without installing a mount.

I did this with a smart cover and some velcro. It worked well and it was very secure. I didn't take any photos but the gist of it was that I used the smart cover on the top of the dash and I would fold it into the triangle shape. I put velcro on the middle pane. I put some velcro on the opposing edge of the iPad and just above the vents to give it a little lift and stabilize it. The magnet in the smart cover was strong enough to hold it in place but the velcro didn't like the torque from that angle.

I decided against continuing to use it because I didn't like the velcro on my iPad. The other downside is that I like the cables to be routed along the passenger side but the smart cover had the cable connection on the driver's side. The upside was that it was pretty sweet to have my LTE enabled iPad there for streaming music and the GPS was awesome. Siri also worked great.

I may do it again if I can find a hard case that works with the smart cover so I can leave the back of the iPad velcro free.

[SpunkyXL]

How stable is it when actually using the device? Does it rock back and forth and wobble? Might do this on my Nexus 7

and +1 on poweramp..great app

[SpunkyXL]

After watching this video, I'm convinced this velcro trick is going to work great!

[SpunkyXL]

I tried this today on my Nexus 7 tablet..not good. Wouldn't stay on the Velcro..Kept falling out. I placed it on the exact same spot where threadstarter put his tablet too

[Apple4life]

Interesting. Which kind of Velcro did you use?

This is the one I used
http://www.homedepot.com/h_d1/N-5yc1...1#.UMrDgJPjl18

[turbo6shooter]

I did that with a small gps in one of my cars. When it got hot, it fell taking both sides of the Velcro with it and left an adhesive mess that didn't come off the dash.

Now I use a Kuda mount in the 335 and screwed my iPhone cradle into it. Much better. And no dash mess, just unbolt and looks like nothing was ever there.

[SpunkyXL]

Originally Posted by SpunkyXL

I tried this today on my Nexus 7 tablet..not good. Wouldn't stay on the Velcro..Kept falling out. I placed it on the exact same spot where threadstarter put his tablet too

I'm an idiot..I put the velcro in wrong. I put 2 of the non-furry parts of the velcro in meshed together rather then one furry end and one hardened end. I'll try it out again this weekend

[taranonline]

Originally Posted by Apple4life

Instead of using one of those ugly tablet mounts for cars, I used velcro.

It costs $3 at Home Depot.




For music playback, I use PowerAmp


Wirelessly stream music to the car stereo using this bluetooth device


This is my first thread and I just wanna share this with you guys

Please help!!

Is this stuff available on ebay or any other website?

Update:: ordered it from ebay. Will report when I install this.

Does the glue leave a scar on dashboard?

[taranonline]

velcro mount is awwsome..

mounted a note 2. will put up pics soon.

[itscard0man]

i have that same belkin, i think i might go a head and get a tablet too ( just for gps and music ) . only thing if you turn the car off the bluetooth disconnects and does not automaticall reconnect when you turn the car back on . and you also have the car on for it to work. where as if you are using just the aux the car does not have to be "on"