[oilngas]

You have to use the stock washer that goes on the rear struck, otherwise your shock will no rest against anything. Hence, you'll be on springs only. I left the rubber stops on and got a hell of drop. We had to raise the lift and put blocks under the tires to get the lift arms up. Here it goes.

Stock wheels 17s with 225/45

Before coils.... Note the lift is not picking up on it.











Here's after install. Wheels coming soon.

[Stanleywan1211]

Originally Posted by E9TOU

Be thankful you're at least tucked. I'm maxed out on my KW V3's and the ride height is not nearly as low as I'd like. I'm prob gonna take the perches off when I get the chance. I'm barely halfway on the fronts.

From the picture I seen its pretty low already, how much you lowered? as in you want it to tuck in the wall? doesn't it rub
Im new what's KW anyways .

[E9TOU]

Originally Posted by Stanleywan1211

From the picture I seen its pretty low already, how much you lowered? as in you want it to tuck in the wall? doesn't it rub
Im new what's KW anyways .

I was planning to go at least 1/2 and inch lower. I've been lagging on this since the current settings don't bother me as much -- but I will get to it in time. I'm lowered to about 0 finger gap.

[Stanleywan1211]

Originally Posted by E9TOU

I was planning to go at least 1/2 and inch lower. I've been lagging on this since the current settings don't bother me as much -- but I will get to it in time. I'm lowered to about 0 finger gap.

so u dropped one inch so far? whats are the spec for ur rims and tires