[jakuum]

This is awesome . Makes things a ton easier to reset adaptations. I haven't taken this out to my car yet but can you select only transmission adaptations to reset or does it just whack them all out?

[smooth1]

This only supports the DME module at this time, so it won't reset transmission adaptations. I may support more modules in the future. The free version currently just resets all DME adaptations at once.

[bumere90]

what does DME adaptions reset do? does it erase the memory? if I have coded my car with inpa will it erase all of that too?
btw, I you man

[bumere90]

pulled the codes
but no description?

Error Codes Present On Sunday, August 05, 2012 12:27:48 PM

Code,Type,Description

DME,DME Number: 07577968
2E8E,4,
2A2F,2,
2A2E,2,

[smooth1]

DME adaptations are:

Idle Comparison
Knock Control
Lambda Probe
Tank Ventilation
Intake Pipe
DKP
Lambda Control
EGR
Load Control
Nox Sensor
Secondary Air
Fuel Control Valve
IBS System
Octane Number
Variants
VVT
VANOS
Segment Time
Combustion Controller
Cylinder Sync For EOL Check
Rough Running Cylinder Sync
Lambda Phaseshift
Injector Energy Comparison

It will not erase any coding that you've done.

Originally Posted by bumere90

pulled the codes
but no description?

Error Codes Present On Sunday, August 05, 2012 12:27:48 PM

Code,Type,Description

DME,DME Number: 07577968
2E8E,4,
2A2F,2,
2A2E,2,

As I mentioned in my first post I'm still translating the descriptions so they are not currently shown.

2E8E Intelligent battery sensor, communication
2A2E Mixture Control
2A2F Mixture Control

[hugus311]

Cable needed for 2006 330i (e90)?
Amazon link?

[smooth1]

Yes, should be K-Line like the link above.

[Desmodromica]

Thanks smooth1, this is heroic.

[smooth1]

Originally Posted by Desmodromica

Thanks smooth1, this is heroic.

You're welcome.

[nightops]

Awesome A MAC SOLUTION for us! and perfect timing too! I was dreading having to borrow a laptop to check codes! will def have some questions for ya! thank you!

[smooth1]

You're welcome.

[JaysBlueE92]

thanks for posting !!

[smooth1]

Originally Posted by JaysBlueE92

thanks for posting !!

You're welcome.

There's an update today that includes descriptions for the major DME codes, MSS70, MSV70, MSV80 full support, and MSS60 (M3) / MSS65 (M5/6) full support. Simply launch the app and it will auto-update. Enjoy!

[jakuum]

In what state does the ignition need to be on in order for the software to read the DME? I've tried with the electronics only on (hold the start button) and with the engine on and it won't read the DME. Saying something about not able to communicate to the DME, verify the power state. I'm using a very similar cable to the silver one on Amazon.

[mundo74]

Originally Posted by smooth1

Guys, I'm new to the forum and hope to become a regular here. I posted this on another forum and was told I should share it over here as well. I've been developing software for BMWs for a while now and I'm finally making some fun applications available to you guys, the enthusiasts. In doing so I've made some FREE options available to everyone, covering a very wide range of BMW vehicles.

These currently include:
Check Prominent and Shadow DME Codes, error code number is displayed. Still translating the descriptions from German to English for the newer vehicles, so full descriptions will be added in soon.
Clear DME Codes.
Clear All DME Adaptations.
Register A New Battery With IBS, as easy as choosing Register New Battery in the special menu.

No INPA/EDIABAS/DIS required, it's a standalone application. This works on Windows XP and newer or Mac OS X 10.5 and newer. All you need is a supported FTDI based USB K-Line or K+DCAN cable, depending on your model year, and you're good to go. Check out the tutorial video to see how to setup the software to use your cable. Enjoy!

Here's a link to the version that supports E90/1/2/3
www.bimmersoftware.com/BMWLogger-2


If you have questions about the free features I'd be happy to respond here... If you have other questions please use email as this is not a commercial post.

Injector Coding!

[smooth1]

Originally Posted by jakuum

In what state does the ignition need to be on in order for the software to read the DME? I've tried with the electronics only on (hold the start button) and with the engine on and it won't read the DME. Saying something about not able to communicate to the DME, verify the power state. I'm using a very similar cable to the silver one on Amazon.

And you selected your cable in preferences, went to the Error Window, and hit Retrieve Codes or Clear Adaptations? There is no "Verify Power State" error so you'll need to be more clear.

You can check with the car running or after hitting the start button so the electronics are on but the engine is off.

The K+DCAN cable is clear, not silver. It should say K+DCAN on it.

[monkey_wrench]

Trying it today on Macbook Pro

[TheSubmariner]

Just curious... are you planning to add other coding options to your software?
(eg. turn off iDrive start-up message, door unlock auto when car turn off etc).

thanks!

[smooth1]

Originally Posted by TheSubmariner

Just curious... are you planning to add other coding options to your software?
(eg. turn off iDrive start-up message, door unlock auto when car turn off etc).

thanks!

If I do it will be a separate application. This one is for logging.

[JimVR4]

Very nice. Will the installation package leave the FTDI drivers alone if they are already installed? I already have a K+DCAN cable and drivers installed for multiple applications including Evoscan and a homebuilt ISO 9141 cable.

[monkey_wrench]

Originally Posted by smooth1

DME adaptations are:

Idle Comparison
Knock Control
Lambda Probe
Tank Ventilation
Intake Pipe
DKP
Lambda Control
EGR
Load Control
Nox Sensor
Secondary Air
Fuel Control Valve
IBS System
Octane Number
Variants
VVT
VANOS
Segment Time
Combustion Controller
Cylinder Sync For EOL Check
Rough Running Cylinder Sync
Lambda Phaseshift
Injector Energy Comparison

It will not erase any coding that you've done.

Does it delete all adaptions at once?
Is it wise to delete all of these at once?

[smooth1]

Originally Posted by JimVR4

Very nice. Will the installation package leave the FTDI drivers alone if they are already installed? I already have a K+DCAN cable and drivers installed for multiple applications including Evoscan and a homebuilt ISO 9141 cable.

If you have old drivers it will update them, otherwise it will leave them alone. Either way it's the FTDI standard driver package so it won't effect the way anything else operates.

Originally Posted by monkey_wrench

Does it delete all adaptions at once?
Is it wise to delete all of these at once?

Registered users will be able to choose. If you retune the car it's wise to reset all of them.