|VRSF| 135i/335i 7" N54 Intercooler Intro GB/Pre-sale! LIMITED STOCK AVAILABLE! - Page 2 - BMW 3-Series (E90 E92) Forum

theinfamousdrew · 08-24-2012, 10:55 AM

Yea I'm in the same time zone and kinda impatient if you couldnt tell...lol

Bimmer305 · 08-24-2012, 04:26 PM

I just received my tracking number

theinfamousdrew · 08-24-2012, 04:31 PM

Quote:

Originally Posted by Bimmer305

I just received my tracking number

Me too!

Myaddiction · 08-24-2012, 07:11 PM

Me three!

theinfamousdrew · 08-24-2012, 10:32 PM

Tiago you should post this up over here too......

http://www.1addicts.com/forums/forumdisplay.php?f=256

Tiago@VRSF · 08-25-2012, 12:18 AM

Thanks for the heads up man! I'll get it up there tomorrow once I'm done packaging the other 112480214 downpipes and FMIC's that arrived!

theinfamousdrew · 08-25-2012, 01:26 PM

Does anyone know what the dimensions of the core are?
I'm most interested in the length of the core only, not including the end tanks.

Thanks

JC335xi · 08-26-2012, 07:33 AM

Quote from another thread and verified by measuring the one sitting in my living room right now

Quote:

Originally Posted by Tiago@VRSF

Dimensions are 20x5.75x7.125" which puts the total volume at 819"

E92oreo · 08-27-2012, 01:24 AM

Got my tracking number... Can't wait!!

Tiago@VRSF · 08-27-2012, 09:09 PM

In stock & ready to ship guys!

theinfamousdrew · 08-27-2012, 09:15 PM

Go create a thread on the 1Addicts side

Tiago@VRSF · 08-27-2012, 09:29 PM

Posted! Thanks for the heads up my man!

Fishsticks · 08-28-2012, 03:36 PM

Any idea if this will fit the 535 and how much cutting would be required for a 7"?

Tiago@VRSF · 08-28-2012, 06:15 PM

The 535 is a completely different animal all together, I'm pretty sure it requires a completely different intercooler. Sorry man!

Tiago@VRSF · 08-29-2012, 07:48 PM

Quite a few kits out! Thanks for the orders guys! Keep em coming

theinfamousdrew · 08-30-2012, 07:13 PM

Installed this beast yesterday and took it to the dyno today......

Just got home from the dyno......

on the 3rd back to back pull in 3rd gear
beginning IAT - 95°
End @ 7k rpm - 98°!!

I'm impressed!

386hp & 425lbs

On a previous log from a week ago I got these numbers with the stock intercooler
3rd gear pull from 3k to 7k rpms
IAT @ start = 109°
IAT @ end = 151°

Thanks again Tiago!

longliven54 · 08-31-2012, 10:38 AM

got my shiping confirmation. now that cobb has launched race gas maps, i am going to hit the dyno with my fbo+meth
will post dyno soon, thanks

Tiago@VRSF · 09-06-2012, 08:13 AM

Almost Friday bump!

ChuckD05 · 09-14-2012, 10:37 PM

how are you guys ordering these, from the forum or through the website? I was going to order one soon...

Also any install pics you guys have to post in here on a Mtech 335 e92?

jordan313 · 09-14-2012, 11:01 PM

Just ordered mine!

jordan313 · 09-18-2012, 10:04 PM

whats up Tiago? It's almost been 5 days and I still haven't gotten any updates on my order

suprtran · 09-19-2012, 01:41 AM

Any way to order the FMIC pre-anodized BLACK?

08-24-2012, 10:55 AM	#23
theinfamousdrew Big Member Drives: 911 Turbo / E70 Join Date: Sep 2010 Location: Charlotte Posts: 684 iTrader: (8) Garage List 2008 BMW 135i [3.00] 2008 BMW X5 (Wife's) [0.00] 2006 BMW 330i (Step ... [0.00] 2002 BMW M3 SOLD [5.00] 2002 BMW 330Ci SOLD [0.00]	Yea I'm in the same time zone and kinda impatient if you couldnt tell...lol __________________ www.carolinaeuros.com

08-24-2012, 04:26 PM	#24
Bimmer305 Private First Class Drives: E92 335i Join Date: Jun 2012 Location: Miami Posts: 135 iTrader: (1)	I just received my tracking number __________________ JB4 G5 / DCI / CDP's / VRSF 7" Intercooler / Walbro LPFP / BMS OCC / E85

08-24-2012, 10:32 PM	#27
theinfamousdrew Big Member Drives: 911 Turbo / E70 Join Date: Sep 2010 Location: Charlotte Posts: 684 iTrader: (8) Garage List 2008 BMW 135i [3.00] 2008 BMW X5 (Wife's) [0.00] 2006 BMW 330i (Step ... [0.00] 2002 BMW M3 SOLD [5.00] 2002 BMW 330Ci SOLD [0.00]	Tiago you should post this up over here too...... http://www.1addicts.com/forums/forumdisplay.php?f=256 __________________ www.carolinaeuros.com

08-25-2012, 01:26 PM	#29
theinfamousdrew Big Member Drives: 911 Turbo / E70 Join Date: Sep 2010 Location: Charlotte Posts: 684 iTrader: (8) Garage List 2008 BMW 135i [3.00] 2008 BMW X5 (Wife's) [0.00] 2006 BMW 330i (Step ... [0.00] 2002 BMW M3 SOLD [5.00] 2002 BMW 330Ci SOLD [0.00]	Does anyone know what the dimensions of the core are? I'm most interested in the length of the core only, not including the end tanks. Thanks __________________ www.carolinaeuros.com

08-27-2012, 09:15 PM	#33
theinfamousdrew Big Member Drives: 911 Turbo / E70 Join Date: Sep 2010 Location: Charlotte Posts: 684 iTrader: (8) Garage List 2008 BMW 135i [3.00] 2008 BMW X5 (Wife's) [0.00] 2006 BMW 330i (Step ... [0.00] 2002 BMW M3 SOLD [5.00] 2002 BMW 330Ci SOLD [0.00]	Go create a thread on the 1Addicts side __________________ www.carolinaeuros.com

08-24-2012, 07:11 PM	#26
Myaddiction Private Drives: 335i Join Date: Nov 2011 Location: Silverdale WA Posts: 69 iTrader: (0)	Me three!

08-25-2012, 12:18 AM	#28
Tiago@VRSF BimmerPost Supporting Vendor Drives: E92 335i, E92 M3 Join Date: Dec 2007 Location: Hudson, MA Posts: 2,823 iTrader: (62) Garage List 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00] 2009 BMW M3 [0.00]	Thanks for the heads up man! I'll get it up there tomorrow once I'm done packaging the other 112480214 downpipes and FMIC's that arrived!

08-27-2012, 01:24 AM	#31
E92oreo Private Drives: 07 BMW 335i Join Date: Aug 2012 Location: BrookpaRk,ohio Posts: 83 iTrader: (1)	Got my tracking number... Can't wait!!

08-27-2012, 09:09 PM	#32
Tiago@VRSF BimmerPost Supporting Vendor Drives: E92 335i, E92 M3 Join Date: Dec 2007 Location: Hudson, MA Posts: 2,823 iTrader: (62) Garage List 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00] 2009 BMW M3 [0.00]	In stock & ready to ship guys!

08-27-2012, 09:29 PM	#34
Tiago@VRSF BimmerPost Supporting Vendor Drives: E92 335i, E92 M3 Join Date: Dec 2007 Location: Hudson, MA Posts: 2,823 iTrader: (62) Garage List 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00] 2009 BMW M3 [0.00]	Posted! Thanks for the heads up my man!

08-28-2012, 03:36 PM	#35
Fishsticks New Member Drives: 08 JB 535 Join Date: Jul 2012 Location: NE Florida Posts: 24 iTrader: (0)	Any idea if this will fit the 535 and how much cutting would be required for a 7"? __________________ 08 JB 535i, Sport Package, Magnaflow Cat-back Exhaust, COBB AP Stage 1, 5" ETS FMIC, BMS DCI, Matte Kidneys, 15mm BMS Spacers.

08-28-2012, 06:15 PM	#36
Tiago@VRSF BimmerPost Supporting Vendor Drives: E92 335i, E92 M3 Join Date: Dec 2007 Location: Hudson, MA Posts: 2,823 iTrader: (62) Garage List 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00] 2009 BMW M3 [0.00]	The 535 is a completely different animal all together, I'm pretty sure it requires a completely different intercooler. Sorry man!

08-29-2012, 07:48 PM	#37
Tiago@VRSF BimmerPost Supporting Vendor Drives: E92 335i, E92 M3 Join Date: Dec 2007 Location: Hudson, MA Posts: 2,823 iTrader: (62) Garage List 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00] 2009 BMW M3 [0.00]	Quite a few kits out! Thanks for the orders guys! Keep em coming

08-30-2012, 07:13 PM	#38
theinfamousdrew Big Member Drives: 911 Turbo / E70 Join Date: Sep 2010 Location: Charlotte Posts: 684 iTrader: (8) Garage List 2008 BMW 135i [3.00] 2008 BMW X5 (Wife's) [0.00] 2006 BMW 330i (Step ... [0.00] 2002 BMW M3 SOLD [5.00] 2002 BMW 330Ci SOLD [0.00]	Installed this beast yesterday and took it to the dyno today...... Just got home from the dyno...... on the 3rd back to back pull in 3rd gear beginning IAT - 95° End @ 7k rpm - 98°!! I'm impressed! 386hp & 425lbs On a previous log from a week ago I got these numbers with the stock intercooler 3rd gear pull from 3k to 7k rpms IAT @ start = 109° IAT @ end = 151° Thanks again Tiago! __________________ www.carolinaeuros.com

08-31-2012, 10:38 AM	#39
longliven54 First Lieutenant Drives: 2007 335i e90 auto Join Date: Jan 2011 Location: victoria Posts: 386 iTrader: (6)	got my shiping confirmation. now that cobb has launched race gas maps, i am going to hit the dyno with my fbo+meth will post dyno soon, thanks __________________ JB4 G5 / VRSF IC / STETT CAI / GREDDY / custom exhaust / iRotora cross drilled rotots / snow stage 3 meth / 19" iForged senekas / upgraded speakers n CF woofer box / M3 bits/ DINAN camber plates/ KONI/ megan racing toe arm/ supreme power lowering perch

09-06-2012, 08:13 AM	#40
Tiago@VRSF BimmerPost Supporting Vendor Drives: E92 335i, E92 M3 Join Date: Dec 2007 Location: Hudson, MA Posts: 2,823 iTrader: (62) Garage List 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00] 2009 BMW M3 [0.00]	Almost Friday bump!

09-14-2012, 10:37 PM	#41
ChuckD05 NeedsMoarBoost Drives: 08 135i / 06 e90 325xi Join Date: Mar 2010 Location: NY Posts: 430 iTrader: (0) Garage List 2009 BMW 335i Mtech [5.00] 2006 BMW 325xi e90 [5.00]	how are you guys ordering these, from the forum or through the website? I was going to order one soon... Also any install pics you guys have to post in here on a Mtech 335 e92? __________________ 08 135i 6m - 12.1@120.2 2.0 60ft - JB4/Meth - SOLD 09 335i e92 Mtech - 11.9@119 - jb4 iso/flash FBO

09-14-2012, 11:01 PM	#42
jordan313 Second Lieutenant Drives: 07 335i Join Date: Jun 2012 Location: CA Posts: 284 iTrader: (0)	Just ordered mine!

09-18-2012, 10:04 PM	#43
jordan313 Second Lieutenant Drives: 07 335i Join Date: Jun 2012 Location: CA Posts: 284 iTrader: (0)	whats up Tiago? It's almost been 5 days and I still haven't gotten any updates on my order

09-19-2012, 01:41 AM	#44
suprtran First Lieutenant Drives: cars. Join Date: Jul 2011 Location: SoCal Posts: 399 iTrader: (4) Garage List 2009 E82 135i [4.00] 2002 996TT [0.00] 2006 E85 Z4 M (sold) [3.00] 2007 B7 A4 2.0T (re ... [0.00] 2003 E46 M3 (sold) [0.00] 2002 E46 325Ci (sold) [0.00]	Any way to order the FMIC pre-anodized BLACK?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search