|VRSF| 135i/335i 7" N54 Intercooler Intro GB/Pre-sale! LIMITED STOCK AVAILABLE! - Page 4 - BMW 3-Series (E90 E92) Forum

longhorn335 · 10-16-2012, 01:16 PM

Quote:

Originally Posted by longhorn335

Tiago,
Thank you for the quick response. Do you have any other performance test data available? What is the pressure drop of 7" and 5" versions? I'm debating between this and waiting for the 5" to come out. Only mods will be Cobb and intercooler, no downpipes, so that makes me think 5" is right for me, but is hot here in Texas, so perhaps 7" would be better suited?

just out of curiosity, is everybody here buying this FMIC assuming it performs similar to the ETS or any other one based on similar design? I'm probably missing something here, but I'm just trying to compare this to other intercoolers available and I don't see almost any data

JaSSon · 10-16-2012, 06:31 PM

I bought it for bang for the buck. And because my stocker is damaged. Lol

I would have preferred a 5" core, but whatcha gonna do?

longhorn335 · 10-19-2012, 12:02 AM

Quote:

Originally Posted by JaSSon

I bought it for bang for the buck. And because my stocker is damaged. Lol

I would have preferred a 5" core, but whatcha gonna do?

yep, I guess however this thing performs will be a good deal considering the price.. I might buy that considering I'm not planning any hard core mods other than bolt ons

Mrbig · 10-22-2012, 10:49 AM

how is the install ? bumper modding ?

Tiago@VRSF · 10-22-2012, 11:21 AM

Pretty straight forward. The bumper is untouched although the shroud does require trimming.

Just a heads up guys, these are currently on back order, next batch of 100 will arrive in about 6-8 weeks.

diddlkiss · 10-22-2012, 01:16 PM

Quote:

Originally Posted by Tiago@VRSF

The VRSF 7" FMIC was designed to be one of the best performing direct bolt on intercoolers available on the market. The VRSF intercooler features 3D CAD designed cast aluminum end tanks for improved flow over sheet metal end tanks & durability. We use a custom bar & plate intercooler core and a custom fin pack designed to our exact specification which we've developed over the past 7 years with great success on our Evo & DSM platforms. Our 7" intercooler allows for higher HP gains, mainly due to it's ability to keep intake temps down while preventing heat soak which is a common problem with the factory intercooler. This results in a more power and increased reliability with reduced chances of pre-detonation & knock. The VRSF intercooler also features tabs that allow the retention of the factory fan shroud and an additional set of mounting brackets for extra support. We include all necessary custom molded couplers and stainless steel t-bolt clamps necessary for installation.

We offer this intercooler in two different variants. The intercooler is available with the stock connectors or the less restrictive, more conventional pipe/coupler connectors. The stock connectors allow for easier installation but they also create unnecessary back pressure and neck down to almost 2". The ideal connector requires a bit more install time due to the removal of the factory connectors but it eliminates the restriction from the intake tract which allows for more mid-range/top end HP. The removal of the factory connectors is 100% reversible. Each VRSF intercooler is hand finished and pressure tested up to 50 psi to ensure quality. This intercooler includes our "No Hassle" lifetime guarantee to the original buyer.

We guarantee fitment & quality 100%. Here's a few independent reviews detailing the product, install and overall experience:

FirstBMWLA - VRSF New 7" N54 Intercooler Review

Motastic - VRSF Intercooler has Arrived and Installed

Below is a log from FirstBMWLA who was nice enough to take the time to do an independent review. The first log is a 3rd gear run comparing the stock FMIC to our 7" FMIC. More info can be found here. The original stock FMIC log was recorded on the first pass & the VRSF log was recorded on the third pass due to the log not starting correctly the first two times. This is a worst case scenario for the VRSF FMIC and it still manages to drop temps by a whopping 27 degrees in comparison to the stock intercooler. This results in more power along the entire power band, especially in the mid-upper range where it's mostly needed on our small turbos.

In the second log, we show how well the VRSF 7" intercooler prevents heatsoak showing a superior 27 degree increase in temps on a 2nd to 4th gear run. The factory intercooler is known to increase in IATs ranging from 80-100 degrees on 2nd to 4th gear runs.

IN STOCK & READY TO SHIP. You can place your order here.

whats the shipping time?
and ship to China track costs?
thanks so much

longhorn335 · 10-23-2012, 09:46 AM

ETA for 5" intercooler?

longhorn335 · 10-25-2012, 04:30 PM

Quote:

Originally Posted by longhorn335

just out of curiosity, is everybody here buying this FMIC assuming it performs similar to the ETS or any other one based on similar design? I'm probably missing something here, but I'm just trying to compare this to other intercoolers available and I don't see almost any data

too many unknowns and unanswered questions here... if I was proud of my product I would test it and provide all data I could... so I think the conclusion is obvious... thanks for helping me make up my mind, going with ETS instead

Tiago@VRSF · 10-25-2012, 05:50 PM

All our testing is done by third parties. I can absolutely do testing on these but why would you assume all the data is accurate? Why would you assume anyone's self-tested data is accurate? I'd trust logs from a third party over logs from the source any day simply because the source is biased and can easily manipulate the results to their advantage.

I'm not avoiding the question, I've repeated it quite a few times and I'm just losing track of when or if I've said it in a thread

ETS makes a fantastic intercooler. If ours wasn't available, I'd definitely chose that as a second choice.

Tiago@VRSF · 10-25-2012, 05:52 PM

Quote:

Originally Posted by longhorn335

ETA for 5" intercooler?

ETA on the 5" is early December. We're redesigning the end tanks on both the 5" and the 7" to allow for smoother/more free flowing design so we don't have to weld the tubing to the cast end tank.

Tiago@VRSF · 10-26-2012, 11:49 AM

Bump!

ASAP · 10-26-2012, 05:46 PM

Waiting for that 5 inch kind sir!

RimasRS · 10-26-2012, 05:58 PM

I dream about this FMIC but with shipping to Europe and VAT customs taxes it is still bit to expensive. (Saving money)

Bump for best FMIC

JaSSon · 10-29-2012, 08:36 AM

Install is pretty straightforward, once you realize HPF has a nice install video on YouTube. There is no documentation provided with the VRSF FMIC. I had to do significant trimming to the shroud, and I removed my front bumper. I used a tile/grout cutting bit on a dremel to do the cutting, it looks like a tiny model of a medieval spiked club. A cutting wheel just slung melted plastic all over the place.

Tiago@VRSF · 10-30-2012, 05:01 PM

Bump!

bboy8282 · 11-03-2012, 08:56 PM

Please pm price to 91107

bboy8282 · 11-03-2012, 10:52 PM

Also for the 5" intercooler...are we looking at any cutting or trimming required?

Tiago@VRSF · 11-05-2012, 08:46 AM

No cutting or trimming required but we don't have an exact ETA on that guy yet since we're revising the end tanks

Tiago@VRSF · 11-07-2012, 04:31 PM

Bump!

melenkae90 · 11-07-2012, 07:14 PM

How much for 7" shipped to t5e1y6 in Canada?thx

ACEE · 11-08-2012, 11:21 AM

I love my fmic...here is mine installed (Tiago sorry took so long to get pics and review up) http://www.e90post.com/forums/showth...1#post12962135

BillLee · 11-08-2012, 06:06 PM

is there going to be a big price difference between the 5" and 7" fmic?

10-23-2012, 09:46 AM	#73
longhorn335 Private First Class Drives: 08 335i Coupe Join Date: Jul 2010 Location: Houston Posts: 175 iTrader: (1)	ETA for 5" intercooler? __________________ 2008 335i E92 \| Sparkling Graphite \| M-tech \| M3 Lip Spoiler \| Sport Package \| Logic7 \| VMR 19" V701 Gunmetal \| 30% Tinted Windows \| Cobb Tuning \| P3 Boost Gauge

11-07-2012, 07:14 PM	#86
melenkae90 Private First Class Drives: 2007 e90 Join Date: Feb 2012 Location: edmonton ab. Posts: 113 iTrader: (0)	intercooler How much for 7" shipped to t5e1y6 in Canada?thx

11-08-2012, 11:21 AM	#87
ACEE Average Car Exceeding Expectations (ACEE) Drives: 2007 335i e92 Join Date: Nov 2010 Location: Baton Rouge, La Posts: 2,871 iTrader: (7) Garage List 2007 e92 [3.50]	I love my fmic...here is mine installed (Tiago sorry took so long to get pics and review up) http://www.e90post.com/forums/showth...1#post12962135 __________________ MSport front// CPS Front lip// M3 Side Skirts// Custom M3 (non wide body) rear bumper// VRS Type 1 Rear Diffuser// ACS style roof spoiler// AC Schnitzer Pedals// VRSF FMIC// AFE Intake// Magnaflow Axle Back// KSport Kontrol Pro Coilovers// 20" Volk GT30 BUY MY VOLKS // Vredestein Tires// Custom sound sytem

11-08-2012, 06:06 PM	#88
BillLee Major General Drives: AW E90 Join Date: Oct 2007 Location: HTX Posts: 5,141 iTrader: (19) Garage List 2008 335i Sedan [4.65]	is there going to be a big price difference between the 5" and 7" fmic? __________________ "Like" my facebook fan page!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-16-2012, 06:31 PM	#68
JaSSon Down with the N54. Drives: I has a E92! Join Date: Mar 2011 Location: Columbus, OH Posts: 339 iTrader: (0)	I bought it for bang for the buck. And because my stocker is damaged. Lol I would have preferred a 5" core, but whatcha gonna do?

10-22-2012, 10:49 AM	#70
Mrbig Lieutenant Drives: 13 335is Join Date: May 2007 Location: N.Y.C Posts: 592 iTrader: (0)	how is the install ? bumper modding ?

10-22-2012, 11:21 AM	#71
Tiago@VRSF BimmerPost Supporting Vendor Drives: E92 335i, E92 M3 Join Date: Dec 2007 Location: Hudson, MA Posts: 2,803 iTrader: (62) Garage List 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00] 2009 BMW M3 [0.00]	Pretty straight forward. The bumper is untouched although the shroud does require trimming. Just a heads up guys, these are currently on back order, next batch of 100 will arrive in about 6-8 weeks.

10-25-2012, 05:50 PM	#75
Tiago@VRSF BimmerPost Supporting Vendor Drives: E92 335i, E92 M3 Join Date: Dec 2007 Location: Hudson, MA Posts: 2,803 iTrader: (62) Garage List 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00] 2009 BMW M3 [0.00]	All our testing is done by third parties. I can absolutely do testing on these but why would you assume all the data is accurate? Why would you assume anyone's self-tested data is accurate? I'd trust logs from a third party over logs from the source any day simply because the source is biased and can easily manipulate the results to their advantage. I'm not avoiding the question, I've repeated it quite a few times and I'm just losing track of when or if I've said it in a thread ETS makes a fantastic intercooler. If ours wasn't available, I'd definitely chose that as a second choice.

10-26-2012, 11:49 AM	#77
Tiago@VRSF BimmerPost Supporting Vendor Drives: E92 335i, E92 M3 Join Date: Dec 2007 Location: Hudson, MA Posts: 2,803 iTrader: (62) Garage List 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00] 2009 BMW M3 [0.00]	Bump!

10-26-2012, 05:46 PM	#78
ASAP blah blah blah Drives: 2007 BMW 335i Join Date: Sep 2012 Location: Mid Atlantic Posts: 238 iTrader: (0)	Waiting for that 5 inch kind sir!

10-26-2012, 05:58 PM	#79
RimasRS Lieutenant Colonel Drives: 135i MT 2009 AW Join Date: Sep 2010 Location: Europe Posts: 1,681 iTrader: (0)	I dream about this FMIC but with shipping to Europe and VAT customs taxes it is still bit to expensive. (Saving money) Bump for best FMIC

10-29-2012, 08:36 AM	#80
JaSSon Down with the N54. Drives: I has a E92! Join Date: Mar 2011 Location: Columbus, OH Posts: 339 iTrader: (0)	Install is pretty straightforward, once you realize HPF has a nice install video on YouTube. There is no documentation provided with the VRSF FMIC. I had to do significant trimming to the shroud, and I removed my front bumper. I used a tile/grout cutting bit on a dremel to do the cutting, it looks like a tiny model of a medieval spiked club. A cutting wheel just slung melted plastic all over the place.

10-30-2012, 05:01 PM	#81
Tiago@VRSF BimmerPost Supporting Vendor Drives: E92 335i, E92 M3 Join Date: Dec 2007 Location: Hudson, MA Posts: 2,803 iTrader: (62) Garage List 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00] 2009 BMW M3 [0.00]	Bump!

11-03-2012, 08:56 PM	#82
bboy8282 First Lieutenant Drives: BMW 335i Join Date: Feb 2010 Location: Pasadena, California Posts: 371 iTrader: (1)	Please pm price to 91107

11-03-2012, 10:52 PM	#83
bboy8282 First Lieutenant Drives: BMW 335i Join Date: Feb 2010 Location: Pasadena, California Posts: 371 iTrader: (1)	Also for the 5" intercooler...are we looking at any cutting or trimming required?

11-05-2012, 08:46 AM	#84
Tiago@VRSF BimmerPost Supporting Vendor Drives: E92 335i, E92 M3 Join Date: Dec 2007 Location: Hudson, MA Posts: 2,803 iTrader: (62) Garage List 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00] 2009 BMW M3 [0.00]	No cutting or trimming required but we don't have an exact ETA on that guy yet since we're revising the end tanks

11-07-2012, 04:31 PM	#85
Tiago@VRSF BimmerPost Supporting Vendor Drives: E92 335i, E92 M3 Join Date: Dec 2007 Location: Hudson, MA Posts: 2,803 iTrader: (62) Garage List 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00] 2009 BMW M3 [0.00]	Bump!