E90Post
 


TireRack
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > Repairing a 'fried' N54 MSD80 DME



Reply
 
Thread Tools Search this Thread
      08-20-2012, 09:25 PM   #1
Roy Cormier
0
Private
 
Roy Cormier's Avatar
 
Drives: Single Turbo 335i
Join Date: Feb 2012
Location: Green Bay, WI

Posts: 65
iTrader: (0)

Smile Repairing a 'fried' N54 MSD80 DME

So a couple weeks back I was out for a nice Sunday drive in my 335i, I downshifted into 3rd, floored it, and heard an insanely loud backfire. Then that damned half-engine light comes on and the car barely makes it home.

After reading the codes with the Cobb Accessport I decided to probe the pins on the DME connector to try to figure out what was going on.

The Transistor for injector #5 was toast, and after I saw what a replacement DME would cost from the dealer I figured I better just fix it myself. I took the part number off the MOSFET, spent $2.00 for a new one from digi-key and after a little bit of work with the hot-air gun I was back in business.

I was getting the following codes:
30bb - DME digital motor electronics, internal failure
0305
0306
0304
0300
29d1 - Misfire Cyl 5
29d2 - Misfire Cyl 6
29d0 - Misfire Cyl 4
29d9 - something about misfiring with low fuel level
29cc - Misfire Multiple Cylinders



So heres a few pictures in case anyone is unfortunate enough to have a similar problem occur.








Transistor pins were shorted together








I stopped taking pictures after this point. But basically the old transistor was removed and replaced with a new one.


Then after everything was closed back up, it started and ran great.
__________________
Single Turbo E92 BMW 335i | roycormier.net | My YouTube channel

If you can leave black marks on a straight from the time you exit a corner till the time you brake for the next turn....... Then, you have enough horsepower.

Last edited by Roy Cormier; 08-21-2012 at 11:17 AM. Reason: more pictures
Roy Cormier is offline  
Appreciate 0
Reply With Quote
      08-20-2012, 09:27 PM   #2
themyst
66
Major General
 
themyst's Avatar
 
Drives: E90 335i LCI
Join Date: Feb 2009
Location: NYC

Posts: 6,602
iTrader: (8)

Send a message via AIM to themyst
Awesome post! Thanks for sharing. Do you happen to have a full diagram of all the various parts on the DME board that you used for reference?
__________________
E90 LCI N54 6AT
themyst is offline   South Korea
Appreciate 0
Reply With Quote
      08-20-2012, 09:30 PM   #3
Ilma
25
Colonel
 
Drives: BMW
Join Date: Nov 2008
Location: hometown

Posts: 2,563
iTrader: (0)

OK....so I happen to know that MOSFET stands for metal oxide semicondutor field effect transistor.

But I don't think I could ever pull off what you just did

Kudos man!

I think that is a first on this forum
__________________
Sticky is an idiot
Ilma is offline  
Appreciate 0
Reply With Quote
      08-20-2012, 09:33 PM   #4
Roy Cormier
0
Private
 
Roy Cormier's Avatar
 
Drives: Single Turbo 335i
Join Date: Feb 2012
Location: Green Bay, WI

Posts: 65
iTrader: (0)

I think I do, actually. I spent a while tracing pins back to components on the board while I was waiting for my parts to ship. Then I labeled them on one of the images, I'll see if I can find it at work tomorrow.

The transistors in question are IRF644B's.
__________________
Single Turbo E92 BMW 335i | roycormier.net | My YouTube channel

If you can leave black marks on a straight from the time you exit a corner till the time you brake for the next turn....... Then, you have enough horsepower.

Last edited by Roy Cormier; 08-22-2012 at 12:39 PM.
Roy Cormier is offline  
Appreciate 0
Reply With Quote
      08-20-2012, 09:35 PM   #5
BV335
4
Lieutenant
 
BV335's Avatar
 
Drives: BMW 335I Coupe
Join Date: May 2012
Location: CA

Posts: 403
iTrader: (1)

That's great work man! What map were you running on COBB?
BV335 is offline  
Appreciate 0
Reply With Quote
      08-20-2012, 09:40 PM   #6
Roy Cormier
0
Private
 
Roy Cormier's Avatar
 
Drives: Single Turbo 335i
Join Date: Feb 2012
Location: Green Bay, WI

Posts: 65
iTrader: (0)

Stage2+FMIC aggressive, I believe. The transistor got fried due to a wiring harness issue though. Whoever owned this car before me must have been a complete idiot, either that or whatever shop they had work on it sucked. They must have knicked the wiring harness when doing some work, so nearly all of the coil/injector wiring had been slightly cut. But it was under the engine cover so I never noticed until something blew.

The car has been a complete nightmare to own so far, although I love driving it everyday.
__________________
Single Turbo E92 BMW 335i | roycormier.net | My YouTube channel

If you can leave black marks on a straight from the time you exit a corner till the time you brake for the next turn....... Then, you have enough horsepower.
Roy Cormier is offline  
Appreciate 0
Reply With Quote
      08-20-2012, 09:44 PM   #7
iBoost
30
Brigadier General
 
iBoost's Avatar
 
Drives: real slow
Join Date: Nov 2009
Location: Las Vegas

Posts: 3,041
iTrader: (13)

nice job
iBoost is offline  
Appreciate 0
Reply With Quote
      08-20-2012, 10:00 PM   #8
themyst
66
Major General
 
themyst's Avatar
 
Drives: E90 335i LCI
Join Date: Feb 2009
Location: NYC

Posts: 6,602
iTrader: (8)

Send a message via AIM to themyst
Quote:
Originally Posted by stealthtt View Post
I think I do, actually. I spent a while tracing pins back to components on the board while I was waiting for my parts to ship. Then I labeled them on one of the images, I'll see if I can find it at work tomorrow.

The transistors in question are IRFW644B's.
If you could post a DIY or the board layout, that would help us immensely!
__________________
E90 LCI N54 6AT
themyst is offline   South Korea
Appreciate 0
Reply With Quote
      08-20-2012, 10:00 PM   #9
themyst
66
Major General
 
themyst's Avatar
 
Drives: E90 335i LCI
Join Date: Feb 2009
Location: NYC

Posts: 6,602
iTrader: (8)

Send a message via AIM to themyst
Quote:
Originally Posted by Ilma View Post
OK....so I happen to know that MOSFET stands for metal oxide semicondutor field effect transistor.

But I don't think I could ever pull off what you just did

Kudos man!

I think that is a first on this forum
If the DME is already fried, you don't have much to lose!
__________________
E90 LCI N54 6AT
themyst is offline   South Korea
Appreciate 0
Reply With Quote
      08-20-2012, 10:04 PM   #10
cn555ic
182
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: Bimmerscoding.com
Join Date: Jun 2007
Location: New York

Posts: 18,286
iTrader: (5)

Send a message via Yahoo to cn555ic
What were the codes that lead you to the dme MOSFET?
__________________
917-939-4980 CODING E and F Series New York Area

cn555ic is offline   United_States
Appreciate 0
Reply With Quote
      08-20-2012, 10:39 PM   #11
nitehawk
16
Lieutenant Colonel
 
nitehawk's Avatar
 
Drives: e92 335i 6MT
Join Date: May 2011
Location: Toronto

Posts: 1,630
iTrader: (15)

Garage List
Now that's something you dont see everyday!
nitehawk is offline   Canada
Appreciate 0
Reply With Quote
      08-20-2012, 11:43 PM   #12
Myaddiction
0
Private
 
Drives: 335i
Join Date: Nov 2011
Location: San Diego CA

Posts: 78
iTrader: (0)

I would have bought a used DME and thought I was clever for that.
Impressive!
Myaddiction is offline  
Appreciate 0
Reply With Quote
      08-21-2012, 12:41 AM   #13
D_Smiderreen
1
Banned
 
Drives: Please delete my account
Join Date: Nov 2009
Location: please delete my account

Posts: 157
iTrader: (1)

I wish I could give you rep points
D_Smiderreen is offline   United_States
Appreciate 0
Reply With Quote
      08-21-2012, 02:32 AM   #14
Elie335
14
ايلي ٣٣٥ هاهاها
 
Elie335's Avatar
 
Drives: Vorsteiner e92
Join Date: Jun 2009
Location: Leb

Posts: 1,446
iTrader: (1)

can you please tell what code were you throwing ?
__________________
Elie335 is offline   St Pierre and Miquelon
Appreciate 0
Reply With Quote
      08-21-2012, 04:29 AM   #15
cstavaru
32
Brigadier General
 
cstavaru's Avatar
 
Drives: 2009 335i M Sport Sedan 6MT
Join Date: Aug 2008
Location: Bucharest, Romania

Posts: 3,236
iTrader: (0)

Nice job !
cstavaru is offline  
Appreciate 0
Reply With Quote
      08-21-2012, 05:51 AM   #16
messi
3
First Lieutenant
 
Drives: 2009 E92 335i MSport Coupe 6AT
Join Date: Jun 2011
Location: Trinidad

Posts: 370
iTrader: (1)

Wow. You should working for samsung
__________________
Procede rev2.5se;Er Fmic; BMW PE
messi is offline  
Appreciate 0
Reply With Quote
      08-21-2012, 06:27 AM   #17
Roy Cormier
0
Private
 
Roy Cormier's Avatar
 
Drives: Single Turbo 335i
Join Date: Feb 2012
Location: Green Bay, WI

Posts: 65
iTrader: (0)

The codes were:
30bb - DME digital motor electronics, internal failure
0305
0306
0304
0300
29d1 - Misfire Cyl 5
29d2 - Misfire Cyl 6
29d0 - Misfire Cyl 4
29d9 - something about misfiring with low fuel level
29cc - Misfire Multiple Cylinders

Last edited by Roy Cormier; 08-21-2012 at 06:34 AM. Reason: adding code descriptions
Roy Cormier is offline  
Appreciate 0
Reply With Quote
      08-21-2012, 07:09 AM   #18
enrita
73
Major General
 
enrita's Avatar
 
Drives: 335i - Big turbos
Join Date: Sep 2008
Location: Italian in Sweden

Posts: 7,323
iTrader: (0)

amazing man great job!
__________________
07 335i AT - TD St.2 Turbos - COBB (Custom Cobb mapping by http://www.protuningfreaks.com/) - JB4G5 ISO - Okada Coils - NGK 5992 Plugs - E85 Walbro - Injen Intake - Helix IC - Snow Stg. 3 - Stett CP - AR DPs - midpipes 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - Level 10 AT upgrade - Alpina AT Flash
enrita is offline   Sweden
Appreciate 0
Reply With Quote
      08-21-2012, 07:19 AM   #19
manolooo
1
Private First Class
 
Drives: '09 E92 xdrive
Join Date: Feb 2012
Location: Neutral Zone

Posts: 113
iTrader: (0)

Props
manolooo is offline  
Appreciate 0
Reply With Quote
      08-21-2012, 10:18 AM   #20
scottro
1
Private First Class
 
scottro's Avatar
 
Drives: 2007 335i
Join Date: Sep 2011
Location: Phoenix, AZ

Posts: 197
iTrader: (0)

Nice work! Do you see any pins on the board where they may have left off a JTAG header and one could be soldered on?
scottro is offline  
Appreciate 0
Reply With Quote
      08-21-2012, 11:05 AM   #21
Roy Cormier
0
Private
 
Roy Cormier's Avatar
 
Drives: Single Turbo 335i
Join Date: Feb 2012
Location: Green Bay, WI

Posts: 65
iTrader: (0)

Quote:
Originally Posted by scottro View Post
Nice work! Do you see any pins on the board where they may have left off a JTAG header and one could be soldered on?
I'm not sure yet. Out of boredom I started tracing out some of the BGA pins on the TC1796, but I haven't gotten around to finishing that yet.

Theres a much higher resolution of the board HERE if anyone is interested.

These are the BGA balls that I was working on tracking down:
__________________
Single Turbo E92 BMW 335i | roycormier.net | My YouTube channel

If you can leave black marks on a straight from the time you exit a corner till the time you brake for the next turn....... Then, you have enough horsepower.
Roy Cormier is offline  
Appreciate 0
Reply With Quote
      08-21-2012, 11:11 AM   #22
jb's335
6
Big Boost Addict
 
Drives: AW e92 335
Join Date: Aug 2008
Location: Lima, OH

Posts: 683
iTrader: (12)

Very cool, your information is greatly appreciated!

BTW I love VR-4's. I have met a lot of previous VR-4 owners now with 335i's, interesting how that works out lol. Twin turbo 6 to twin turbo 6!
__________________
FFTEC 62mm...yeah I think that about does it.
jb's335 is offline   United_States
Appreciate 0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:32 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST