BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > DIY Guides > HELP with Electronic steering wheel install !

Thread Tools Search this Thread
      08-27-2012, 02:05 PM   #1
johnniewalker's Avatar

Drives: 328 xdrive
Join Date: Jul 2011
Location: GTA, Canada

iTrader: (9)

HELP with Electronic steering wheel install !

When doing the installation behind the coil spring,
There is a step that says:

Disconnect all cables from plug X10170 and connect
to branch A7 as follows
- BR cable from PIN 1 to PIN 1
- BR/GE cable from PIN 2 to PIN 2
- GE/BR cable from PIN 3 to PIN 3
- GE/SW cable from PIN 4 to PIN 4
- GR/BR cable from PIN 5 to PIN 5
- GR/SW cable from PIN 6 to PIN 6

My X10170 plug is a 12 pin socket, it has the 6 cables above and another 4 cables at pin 7, 9, 10 and 12.

The steering wheel came with branch A7 (which is a 12 pin socket identical to X10170) and pins 7, 10 and 12 are occupied.

So my question is:
After I transfer pin 1,2,3,4,5 and 6 from X10170 to A7
and A7 already has 3 cables each at pin 7, 10 and 12.

What do I do with the 4 cables that were originally at pin 7,9,10 and 12 from X10170 ?
Only the one at pin 9 can be transferred since it is not occupied.
Performance Intake and Exhaust, Apex arc-8, KW v1, Vorshlag camber, ER brake lines, Lux V4, AA tune
Appreciate 0


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 06:35 PM.

Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST