BMW 3-Series (E90 E92) Forum > E90/E92/E93 Marketplace (For Sale / Trade / Wanted) > Vendor Comments/Review/Feedback Forum > HighPerformanceBulbs LED Sidemarkers

Thread Tools Search this Thread
      10-27-2012, 05:57 PM   #1
Agent Smith
skinrock's Avatar
Drives: 2013 Fusion AWD
Join Date: Jan 2011
Location: The Matrix

Posts: 2,860
iTrader: (9)

Garage List
2007 335i  [3.45]
HighPerformanceBulbs LED Sidemarkers

As mentioned in my other thread, I decided to do a full LED upgrade on my exterior lights. One thing that I absolutely wanted were amber turn signals, including the sidemarkers. Due to a color mismatch with the sidemarkers from MODMY3, I decided to try HPB's kit. I was pretty nervous since I was keeping the turn signal bulbs from MODMY3, so I didn't expect the color to match.

I was wrong, the HPB amber sidemarkers match perfectly, now everything looks like the stock amber color. My only concern was with the fitment, the bulbs were definitely tight pushing them in - I think the top LED chip was hitting the housing. I was able to snap it in, but you just have to be willing to press it in harder than the stock bulbs.

Other than that, I am very pleased with these sidemarkers from HPB.
skinrock is offline  
Appreciate 0
Reply With Quote
      10-27-2012, 05:59 PM   #2
Lieutenant Colonel
nitehawk's Avatar
Drives: e92 335i 6MT
Join Date: May 2011
Location: Toronto

Posts: 1,630
iTrader: (15)

Garage List
Cool, I have the amber HPB sidemarker bulbs too. They also touch the inside out the plastic housing but I was able to fit them in.
nitehawk is offline   Canada
Appreciate 0
Reply With Quote
      10-31-2012, 02:40 PM   #3
No 55mph
1QuikWS6's Avatar
Drives: 09 E92 328iX N51 3-Stage
Join Date: Jul 2009
Location: Blitzburgh, PA

Posts: 4,747
iTrader: (83)

Garage List
I had the same problem with mine hitting inside housing. Talked to Fred @ HPB and he stated that it would be fine to carefully file down the length at the contact end - I used a small fine Swiss file and took them both down about 1/16" - still way more contact insertion length than needed & now they don't hit on inside
2009 328ix E92//SGM//ACS Roof Spoiler//MTech Aero Lip+Trunk Spoiler//M3 Side Skirts//CF Roundels+Grilles//M3 Novillo Interior//Perf Shift Lever+Boot//MPerf DCT Wheel//M3 GT3 eBrake Handle+Boot//ACS Pedals//M3 Mirrors//LCI Tails w/LUX Rev//DTEC V7 AE+MTec 6000K D1S+HPB HID 6000K Fogs//HPB LED Interior//RPI Scoops//CF Euro Airbox+Underhood Hsgs//K&N//BMW PE//MTech Rear Bumper-iS Sport Diffuser//CF Strut Brace//Vishnu OFT//BMW 193M's+Kumho 4X
1QuikWS6 is offline   United_States
Appreciate 0
Reply With Quote
      11-07-2012, 12:34 PM   #4
BimmerPost Supporting Vendor

Jeff@TopGearSolutions's Avatar
Drives: C6 Z06, GSXR-750, 09 335i
Join Date: Dec 2008
Location: TopGearSolutions.com

Posts: 17,975
iTrader: (32)

Send a message via AIM to Jeff@TopGearSolutions
Yep, it's normal that it's so close. It was either that or an LED that had less output so it was worth the extra squeeze. These were all tested on my car first to ensure fitment and brightness, as well as being the test dummy for reliability and error free.

Glad to see people are finding HPB and their products up to the task and higher quality over some competitors that claim they are the "Same".
Jeff@TopGearSolutions is offline   United_States
Appreciate 0
Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -5. The time now is 09:45 AM.

Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST