E90Post
 


GTB Performance
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > RE-SCAN! 6AT 335xi brake,abs,traction control,transmission mal.and 4x4 lights



Reply
 
Thread Tools Search this Thread
      04-14-2012, 04:57 PM   #1
BES335xi
Colonel
 
BES335xi's Avatar
 
Drives: FBO+ N54xi
Join Date: Mar 2008
Location: Queens, NYC

Posts: 2,133
iTrader: (4)

Garage List
03/07 E90 335xi  [0.50]
Question FIXED! 6AT 335xi brake,abs,traction control,transmission mal.and 4x4 lights

ok so i have my brake,abs,traction control,and 4x4 & Transmission malfunction ;drive moderately lights on all at the same time and when i start my car i hear a short little grind noise, and my xdrive is completely disabled.

All mods on sig on, have been driving ever since i've installed them with no problems at all and no codes as well, and even this morning when i went to work it drove fine and smooth. This afternoon on my way home from work stopped at the a red light all the lights appeared on the dashboard like a christmass tree, thankfully it was just a few blocks from the house and drove it home.

Just scanned my car with the BT cable and i've got all bunch of codes that came out, Please any help, would be greatly appriciated.

CODES:

Quote:
ENGINE N54

MSD80/MSD81 Engine module for N53/N54
Module Identification


Hardware Number 7611397
Hardware Vesion Number 00
Coding Index 17
DiagnosticIndex 0000
VariantIndex 3333
Date of ECU Manufacturing 20070521
System Supplier Siemens
Message Catalog Version 0.0.0
Software Version 0.0.0
OS Version 0.0.0


Current Fault Codes

29F5:
29F5 Catalytic converter conversion 2
Error will cause a warning light
Error is not currently present
Test conditions have been completed
Short circuit or signal interruption

Freeze Frame Information
Event 1Odometer 64640kms 40165miles
Engine speed 1,280.00 rpm
air mass calculated 200.76 mg/stk
Engine temperature 93.75 C
Intake air temperature 23.25 C

Event 2Odometer 64768kms 40244miles
Engine speed 1,696.00 rpm
air mass calculated 200.76 mg/stk
Engine temperature 94.50 C
Intake air temperature 16.50 C

Event 3Odometer 65752kms 40856miles
Engine speed 2,176.00 rpm
air mass calculated 75.96 mg/stk
Engine temperature 99.00 C
Intake air temperature 26.25 C



29F4:
29F4 Catalytic converter conversion
Error will cause a warning light
Error is not currently present
Test conditions have been completed

Freeze Frame Information
Event 1Odometer 64640kms 40165miles
Engine speed 1,952.00 rpm
air mass calculated 195.33 mg/stk
Engine temperature 103.50 C
Intake air temperature 26.25 C

Event 2Odometer 64768kms 40244miles
Engine speed 1,440.00 rpm
air mass calculated 189.91 mg/stk
Engine temperature 92.25 C
Intake air temperature 15.75 C

Event 3Odometer 65752kms 40856miles
Engine speed 2,400.00 rpm
air mass calculated 108.52 mg/stk
Engine temperature 100.50 C
Intake air temperature 25.50 C



2F6C:
2F6C Exhaust fumeflap, input signal
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Timeout

Freeze Frame Information
Event 1Odometer 65536kms 40722miles
Speed 50.00 km/h
time since start end 153.60 s
pedal sensor 1 16.80 %
voltage Kl. 87 13.91 V

Event 2Odometer 65592kms 40756miles
Speed 101.00 km/h
time since start end 281.60 s
pedal sensor 1 47.66 %
voltage Kl. 87 14.12 V

Event 3Odometer 66208kms 41139miles
Speed 0.00 km/h
time since start end 0.00 s
pedal sensor 1 0.00 %
voltage Kl. 87 14.12 V



2E98:
2E98 Generator, communication
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
Timeout

Freeze Frame Information
Event 1Odometer 66200kms 41134miles
time since start end 3,072.00 s
manufacturer code Generator 1 0.00 -
characteristics generator type generator 1 6.00 -
Battery Voltage 10.75 V

Event 2Odometer 66208kms 41139miles
time since start end 230.40 s
manufacturer code Generator 1 0.00 -
characteristics generator type generator 1 6.00 -
Battery Voltage 15.87 V

Event 3Odometer 66208kms 41139miles
time since start end 204.80 s
manufacturer code Generator 1 255.00 -
characteristics generator type generator 1 255.00 -
Battery Voltage 13.06 V



2AAF:
2AAF Fuel pump, plausibility
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
Short circuit or signal interruption

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
fuel pressure before mass control valve 3,311.39 hPa
Engine speed 3,712.00 rpm
voltage Kl. 87 10.16 V
injected mass of fuel 64.00 l/h



CDA1:
CDA1 Message (steering wheel angle, C4)
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Timeout

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
Engine speed 1,664.00 rpm
control unit inside temperature 42.00 C
voltage Kl. 87 17.57 V
status motor control 2.00 0-n

Event 2Odometer 66208kms 41139miles
Engine speed 992.00 rpm
control unit inside temperature 42.00 C
voltage Kl. 87 16.25 V
status motor control 2.00 0-n

Event 3Odometer 66208kms 41139miles
Engine speed 928.00 rpm
control unit inside temperature 46.50 C
voltage Kl. 87 17.06 V
status motor control 2.00 0-n



CD95:
CD95 Message (operation cruise control/ACC active cruise control, 194)
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Timeout

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
Engine speed 1,408.00 rpm
control unit inside temperature 42.00 C
voltage Kl. 87 17.37 V
status motor control 2.00 0-n

Event 2Odometer 66208kms 41139miles
Engine speed 1,120.00 rpm
control unit inside temperature 42.00 C
voltage Kl. 87 16.76 V
status motor control 2.00 0-n

Event 3Odometer 66208kms 41139miles
Engine speed 928.00 rpm
control unit inside temperature 46.50 C
voltage Kl. 87 17.16 V
status motor control 2.00 0-n



2DEB:
2DEB Power management, vehicle wiring system control
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Short circuit or signal interruption

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
Engine speed 736.00 rpm
battery voltage measured by IBS intelligent battery sensor 15.47 -
generator nominal voltage 14.00 V
voltage Kl. 87 14.02 V

Event 2Odometer 66208kms 41139miles
Engine speed 2,144.00 rpm
battery voltage measured by IBS intelligent battery sensor 18.03 -
generator nominal voltage 14.00 V
voltage Kl. 87 17.67 V

Event 3Odometer 66208kms 41139miles
Engine speed 736.00 rpm
battery voltage measured by IBS intelligent battery sensor 17.01 -
generator nominal voltage 14.00 V
voltage Kl. 87 16.55 V



2E82:
2E82 Elctrical cooling pump: switch off
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Signal or value below threshold

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
coolant temperature OBD 106.00 C
water pump voltage 18.20 V
water pump temperature electronics 95.00 C
water pump current adaption 0.50 A

Event 2Odometer 66208kms 41139miles
coolant temperature OBD 111.00 C
water pump voltage 18.50 V
water pump temperature electronics 85.00 C
water pump current adaption 0.50 A

Event 3Odometer 66208kms 41139miles
coolant temperature OBD 92.00 C
water pump voltage 17.60 V
water pump temperature electronics 69.00 C
water pump current adaption 0.00 A




SHADOW FAULT CODES

MSD80/MSD81 Engine module for N53/N54
Module Identification


Hardware Number 7611397
Hardware Vesion Number 00
Coding Index 17
DiagnosticIndex 0000
VariantIndex 3333
Date of ECU Manufacturing 20070521
System Supplier Siemens
Message Catalog Version 0.0.0
Software Version 0.0.0
OS Version 0.0.0


Current Shadow Fault Codes

2FDB:

Error will not cause a warning light
Error is not currently present
Test conditions have been completed
Short circuit or signal interruption



29F5:
29F5 Catalytic converter conversion 2
Error will cause a warning light
Error is not currently present
Test conditions have been completed
Short circuit or signal interruption

Freeze Frame Information
Event 1Odometer 64640kms 40165miles
Engine speed 1,280.00 rpm
air mass calculated 200.76 mg/stk
Engine temperature 93.75 C
Intake air temperature 23.25 C

Event 2Odometer 64768kms 40244miles
Engine speed 1,696.00 rpm
air mass calculated 200.76 mg/stk
Engine temperature 94.50 C
Intake air temperature 16.50 C

Event 3Odometer 65752kms 40856miles
Engine speed 2,176.00 rpm
air mass calculated 75.96 mg/stk
Engine temperature 99.00 C
Intake air temperature 26.25 C



29F4:
29F4 Catalytic converter conversion
Error will cause a warning light
Error is not currently present
Test conditions have been completed

Freeze Frame Information
Event 1Odometer 64640kms 40165miles
Engine speed 1,952.00 rpm
air mass calculated 195.33 mg/stk
Engine temperature 103.50 C
Intake air temperature 26.25 C

Event 2Odometer 64768kms 40244miles
Engine speed 1,440.00 rpm
air mass calculated 189.91 mg/stk
Engine temperature 92.25 C
Intake air temperature 15.75 C

Event 3Odometer 65752kms 40856miles
Engine speed 2,400.00 rpm
air mass calculated 108.52 mg/stk
Engine temperature 100.50 C
Intake air temperature 25.50 C



2F6C:
2F6C Exhaust fumeflap, input signal
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Timeout

Freeze Frame Information
Event 1Odometer 65536kms 40722miles
Speed 50.00 km/h
time since start end 153.60 s
pedal sensor 1 16.80 %
voltage Kl. 87 13.91 V

Event 2Odometer 65592kms 40756miles
Speed 101.00 km/h
time since start end 281.60 s
pedal sensor 1 47.66 %
voltage Kl. 87 14.12 V

Event 3Odometer 66208kms 41139miles
Speed 0.00 km/h
time since start end 0.00 s
pedal sensor 1 0.00 %
voltage Kl. 87 14.12 V



2E98:
2E98 Generator, communication
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
Timeout

Freeze Frame Information
Event 1Odometer 66200kms 41134miles
time since start end 3,072.00 s
manufacturer code Generator 1 0.00 -
characteristics generator type generator 1 6.00 -
Battery Voltage 10.75 V

Event 2Odometer 66208kms 41139miles
time since start end 230.40 s
manufacturer code Generator 1 0.00 -
characteristics generator type generator 1 6.00 -
Battery Voltage 15.87 V

Event 3Odometer 66208kms 41139miles
time since start end 204.80 s
manufacturer code Generator 1 255.00 -
characteristics generator type generator 1 255.00 -
Battery Voltage 13.06 V



2AAF:
2AAF Fuel pump, plausibility
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
Short circuit or signal interruption

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
fuel pressure before mass control valve 3,311.39 hPa
Engine speed 3,712.00 rpm
voltage Kl. 87 10.16 V
injected mass of fuel 64.00 l/h



CDA1:
CDA1 Message (steering wheel angle, C4)
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Timeout

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
Engine speed 1,664.00 rpm
control unit inside temperature 42.00 C
voltage Kl. 87 17.57 V
status motor control 2.00 0-n

Event 2Odometer 66208kms 41139miles
Engine speed 992.00 rpm
control unit inside temperature 42.00 C
voltage Kl. 87 16.25 V
status motor control 2.00 0-n

Event 3Odometer 66208kms 41139miles
Engine speed 928.00 rpm
control unit inside temperature 46.50 C
voltage Kl. 87 17.06 V
status motor control 2.00 0-n



CD95:
CD95 Message (operation cruise control/ACC active cruise control, 194)
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Timeout

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
Engine speed 1,408.00 rpm
control unit inside temperature 42.00 C
voltage Kl. 87 17.37 V
status motor control 2.00 0-n

Event 2Odometer 66208kms 41139miles
Engine speed 1,120.00 rpm
control unit inside temperature 42.00 C
voltage Kl. 87 16.76 V
status motor control 2.00 0-n

Event 3Odometer 66208kms 41139miles
Engine speed 928.00 rpm
control unit inside temperature 46.50 C
voltage Kl. 87 17.16 V
status motor control 2.00 0-n



2AD0:
2AD0 Gear control
Error will not cause a warning light
Error is currently present
Test conditions have been completed

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
motor status 2.00 0-n
calculated gear 3.00 -
status motor control 2.00 0-n
voltage Kl. 87 15.74 V

Event 2Odometer 66208kms 41139miles
motor status 1.00 0-n
calculated gear 0.00 -
status motor control 2.00 0-n
voltage Kl. 87 11.98 V

Event 3Odometer 66208kms 41139miles
motor status 0.00 0-n
calculated gear 0.00 -
status motor control 0.00 0-n
voltage Kl. 87 12.49 V



2DEB:
2DEB Power management, vehicle wiring system control
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Short circuit or signal interruption

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
Engine speed 736.00 rpm
battery voltage measured by IBS intelligent battery sensor 15.47 -
generator nominal voltage 14.00 V
voltage Kl. 87 14.02 V

Event 2Odometer 66208kms 41139miles
Engine speed 2,144.00 rpm
battery voltage measured by IBS intelligent battery sensor 18.03 -
generator nominal voltage 14.00 V
voltage Kl. 87 17.67 V

Event 3Odometer 66208kms 41139miles
Engine speed 736.00 rpm
battery voltage measured by IBS intelligent battery sensor 17.14 -
generator nominal voltage 14.00 V
voltage Kl. 87 16.76 V



2E82:
2E82 Elctrical cooling pump: switch off
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Signal or value below threshold

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
coolant temperature OBD 106.00 C
water pump voltage 18.20 V
water pump temperature electronics 95.00 C
water pump current adaption 0.50 A

Event 2Odometer 66208kms 41139miles
coolant temperature OBD 111.00 C
water pump voltage 18.50 V
water pump temperature electronics 85.00 C
water pump current adaption 0.50 A

Event 3Odometer 66208kms 41139miles
coolant temperature OBD 92.00 C
water pump voltage 17.60 V
water pump temperature electronics 69.00 C
water pump current adaption 0.00 A


TRANSMISSION MANAGEMENT

5014:
Supply voltage
Error will cause a warning light
Error is currently present
Test conditions have been completed
Short circuit or signal interruption



51B0:
DSC Signal not plausible: Brake pressure signal
Error will not cause a warning light
Error is currently present
Test conditions have been completed

CAR ACCES SYSTEM 3

A0B5:
Signal identification peed error
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
Short circuit or signal interruption

TRANSFER CASE

53FC:
53FC Clamp 30 voltage supply
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Short circuit or signal interruption



53FD:
53FD Clamp 30g voltage supply
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Short circuit or signal interruption



55C3:
55C3 VGSG-all-wheel-Notlaufregelung activated. No DXC index moment requirement.
Error will not cause a warning light
Error is not currently present
Test conditions have been completed

Any help pls, thank you.
__________________
JB4+usb | P3 Vent Boost Gauge v2 | BMS OCC | BMS DCI | AMS FMIC | AR xi CL DP's | BT Tool | Edibias/NCSExpert/INPA BMW Coding | Cyba Quad Exhaust tips | M-Tech Rear & M3 Front Bumper | Red Cyba Air Scoops | Blacklines | Vinyl Overlays | ACS Roof Spoiler | Matte Black Grilles | LED Side Mirrors | Rear Euro Fogs | etc..
.

Last edited by BES335xi; 04-22-2012 at 06:25 PM.
BES335xi is offline   Albania
0
Reply With Quote
      04-14-2012, 05:06 PM   #2
rader1
Banned
 
Drives: Cobb Stage 2+ 135i
Join Date: Apr 2011
Location: Roanoke, VA

Posts: 2,197
iTrader: (0)

First place I would start is fuses and then the battery. Whenever you have A LOT of codes appear at once it's usually not several malfunctions but one thing(usually electrical.) Have the battery tested, I know this doesn't sound logical but battery issues cause some weird problems on modern cars.
rader1 is offline  
0
Reply With Quote
      04-14-2012, 05:45 PM   #3
BES335xi
Colonel
 
BES335xi's Avatar
 
Drives: FBO+ N54xi
Join Date: Mar 2008
Location: Queens, NYC

Posts: 2,133
iTrader: (4)

Garage List
03/07 E90 335xi  [0.50]
Quote:
Originally Posted by rader1
First place I would start is fuses and then the battery. Whenever you have A LOT of codes appear at once it's usually not several malfunctions but one thing(usually electrical.) Have the battery tested, I know this doesn't sound logical but battery issues cause some weird problems on modern cars.
Thx, yeah ill check the fuses first, and then i guess battery just the car starts up fine and quick idk really frustrated right now..
__________________
JB4+usb | P3 Vent Boost Gauge v2 | BMS OCC | BMS DCI | AMS FMIC | AR xi CL DP's | BT Tool | Edibias/NCSExpert/INPA BMW Coding | Cyba Quad Exhaust tips | M-Tech Rear & M3 Front Bumper | Red Cyba Air Scoops | Blacklines | Vinyl Overlays | ACS Roof Spoiler | Matte Black Grilles | LED Side Mirrors | Rear Euro Fogs | etc..
.
BES335xi is offline   Albania
0
Reply With Quote
      04-14-2012, 06:16 PM   #4
ruphianh
Private First Class
 
Drives: E90 335XI
Join Date: Jan 2011
Location: Bay Area, CA

Posts: 128
iTrader: (0)

Quote:
Originally Posted by BES335xi View Post
Thx, yeah ill check the fuses first, and then i guess battery just the car starts up fine and quick idk really frustrated right now..
Just from experience, Take a photo with your phone of the fuse box in your glovebox before pulling fuses to check them. There are a lot of empty fuse locations and i was second guessing myself on which location to put a fuse as I pulled one at a time, Thats until i took a photo.

There is also a fuse in the box that holds the DME.
ruphianh is offline  
0
Reply With Quote
      04-14-2012, 07:20 PM   #5
BES335xi
Colonel
 
BES335xi's Avatar
 
Drives: FBO+ N54xi
Join Date: Mar 2008
Location: Queens, NYC

Posts: 2,133
iTrader: (4)

Garage List
03/07 E90 335xi  [0.50]
I just checked the Fused and there seems to be atleast 5 that wont light when i check them, im going to replace them, i hope i have all the fuses...
__________________
JB4+usb | P3 Vent Boost Gauge v2 | BMS OCC | BMS DCI | AMS FMIC | AR xi CL DP's | BT Tool | Edibias/NCSExpert/INPA BMW Coding | Cyba Quad Exhaust tips | M-Tech Rear & M3 Front Bumper | Red Cyba Air Scoops | Blacklines | Vinyl Overlays | ACS Roof Spoiler | Matte Black Grilles | LED Side Mirrors | Rear Euro Fogs | etc..
.
BES335xi is offline   Albania
0
Reply With Quote
      04-14-2012, 07:29 PM   #6
rader1
Banned
 
Drives: Cobb Stage 2+ 135i
Join Date: Apr 2011
Location: Roanoke, VA

Posts: 2,197
iTrader: (0)

Quote:
Originally Posted by BES335xi View Post
I just checked the Fused and there seems to be atleast 5 that wont light when i check them, im going to replace them, i hope i have all the fuses...
I know the diagramis pretty much useless but can you tell if they're powertrain related? Hopefully that fixes it... But it does beg the question why did they blow?
rader1 is offline  
0
Reply With Quote
      04-14-2012, 08:16 PM   #7
BES335xi
Colonel
 
BES335xi's Avatar
 
Drives: FBO+ N54xi
Join Date: Mar 2008
Location: Queens, NYC

Posts: 2,133
iTrader: (4)

Garage List
03/07 E90 335xi  [0.50]
I ended up shutting it down and will go at it tommorrow, idk if the TOP 4/5 fuses need to light when u check or not but they dont and i pulled a few to check and they seemed fine, now im completely clueless of what to do, ill check the fuses at the dme tommorrow and see if theyre ok... So effin' weird and while i was checking the fuses with car on Transmission Malfunction came on and the lights inside the car started flickering, weird?
__________________
JB4+usb | P3 Vent Boost Gauge v2 | BMS OCC | BMS DCI | AMS FMIC | AR xi CL DP's | BT Tool | Edibias/NCSExpert/INPA BMW Coding | Cyba Quad Exhaust tips | M-Tech Rear & M3 Front Bumper | Red Cyba Air Scoops | Blacklines | Vinyl Overlays | ACS Roof Spoiler | Matte Black Grilles | LED Side Mirrors | Rear Euro Fogs | etc..
.
BES335xi is offline   Albania
0
Reply With Quote
      04-14-2012, 08:18 PM   #8
MilehighM3
Colonel
 
MilehighM3's Avatar
 
Drives: E90 M3
Join Date: May 2011
Location: Colorado Springs

Posts: 2,007
iTrader: (9)

If you hear a brief grinding sound when you start and shut the car off, most likely it's the transfer case actuator motor. It does a self test/calibration when the key is cycled, and the teeth in the moor are probably stripped. That's the noise that you're hearing. You can get it separately from the transfer case and it's a fairly easy swap.
MilehighM3 is offline  
0
Reply With Quote
      04-14-2012, 08:27 PM   #9
BES335xi
Colonel
 
BES335xi's Avatar
 
Drives: FBO+ N54xi
Join Date: Mar 2008
Location: Queens, NYC

Posts: 2,133
iTrader: (4)

Garage List
03/07 E90 335xi  [0.50]
Quote:
Originally Posted by Bmw135er
If you hear a brief grinding sound when you start and shut the car off, most likely it's the transfer case actuator motor. It does a self test/calibration when the key is cycled, and the teeth in the moor are probably stripped. That's the noise that you're hearing. You can get it separately from the transfer case and it's a fairly easy swap.
Thx, ive only heard that once when i shut off the car, ive turned the car on and off a few times and didnt hear anything anymore,all lights on as on first post and then just the transmission malfunction appears after 5min or so being on and lights inside the car start flickering. I really dont know what to check next exept the fuses at the dme.. anywhere else i should check?
__________________
JB4+usb | P3 Vent Boost Gauge v2 | BMS OCC | BMS DCI | AMS FMIC | AR xi CL DP's | BT Tool | Edibias/NCSExpert/INPA BMW Coding | Cyba Quad Exhaust tips | M-Tech Rear & M3 Front Bumper | Red Cyba Air Scoops | Blacklines | Vinyl Overlays | ACS Roof Spoiler | Matte Black Grilles | LED Side Mirrors | Rear Euro Fogs | etc..
.
BES335xi is offline   Albania
0
Reply With Quote
      04-14-2012, 09:00 PM   #10
MilehighM3
Colonel
 
MilehighM3's Avatar
 
Drives: E90 M3
Join Date: May 2011
Location: Colorado Springs

Posts: 2,007
iTrader: (9)

You'll probably have to get it diagnosed by a dealer or someone capable of checking the dsc faults. Reading dme faults won't get you what you need to be positive. Transfer case motors are fairly common, especially in tuned cars with more torque than stock. That motor works over time. Short of pulling the motor off and disassembling it to check the gears, fuses are about all you can check in this case.
MilehighM3 is offline  
0
Reply With Quote
      04-14-2012, 09:23 PM   #11
BES335xi
Colonel
 
BES335xi's Avatar
 
Drives: FBO+ N54xi
Join Date: Mar 2008
Location: Queens, NYC

Posts: 2,133
iTrader: (4)

Garage List
03/07 E90 335xi  [0.50]
Quote:
Originally Posted by Bmw135er View Post
You'll probably have to get it diagnosed by a dealer or someone capable of checking the dsc faults. Reading dme faults won't get you what you need to be positive. Transfer case motors are fairly common, especially in tuned cars with more torque than stock. That motor works over time. Short of pulling the motor off and disassembling it to check the gears, fuses are about all you can check in this case.
I made a mistake and rushed and didnt scan the car the way I supposed to, i scanned the car with jb4 on map2, lol so dumb! Anyway i just scanned my car again with jb4 on map0 and pulled these codes, as it seems to be water pump and other things, i will have it towed to my mechanic tommorrow sometime....

Quote:
ENGINE N54

MSD80/MSD81 Engine module for N53/N54
Module Identification


Hardware Number 7611397
Hardware Vesion Number 00
Coding Index 17
DiagnosticIndex 0000
VariantIndex 3333
Date of ECU Manufacturing 20070521
System Supplier Siemens
Message Catalog Version 0.0.0
Software Version 0.0.0
OS Version 0.0.0


Current Fault Codes

29F5:
29F5 Catalytic converter conversion 2
Error will cause a warning light
Error is not currently present
Test conditions have been completed
Short circuit or signal interruption

Freeze Frame Information
Event 1Odometer 64640kms 40165miles
Engine speed 1,280.00 rpm
air mass calculated 200.76 mg/stk
Engine temperature 93.75 C
Intake air temperature 23.25 C

Event 2Odometer 64768kms 40244miles
Engine speed 1,696.00 rpm
air mass calculated 200.76 mg/stk
Engine temperature 94.50 C
Intake air temperature 16.50 C

Event 3Odometer 65752kms 40856miles
Engine speed 2,176.00 rpm
air mass calculated 75.96 mg/stk
Engine temperature 99.00 C
Intake air temperature 26.25 C



29F4:
29F4 Catalytic converter conversion
Error will cause a warning light
Error is not currently present
Test conditions have been completed

Freeze Frame Information
Event 1Odometer 64640kms 40165miles
Engine speed 1,952.00 rpm
air mass calculated 195.33 mg/stk
Engine temperature 103.50 C
Intake air temperature 26.25 C

Event 2Odometer 64768kms 40244miles
Engine speed 1,440.00 rpm
air mass calculated 189.91 mg/stk
Engine temperature 92.25 C
Intake air temperature 15.75 C

Event 3Odometer 65752kms 40856miles
Engine speed 2,400.00 rpm
air mass calculated 108.52 mg/stk
Engine temperature 100.50 C
Intake air temperature 25.50 C



2F6C:
2F6C Exhaust fumeflap, input signal
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Timeout

Freeze Frame Information
Event 1Odometer 65536kms 40722miles
Speed 50.00 km/h
time since start end 153.60 s
pedal sensor 1 16.80 %
voltage Kl. 87 13.91 V

Event 2Odometer 65592kms 40756miles
Speed 101.00 km/h
time since start end 281.60 s
pedal sensor 1 47.66 %
voltage Kl. 87 14.12 V

Event 3Odometer 66208kms 41139miles
Speed 0.00 km/h
time since start end 0.00 s
pedal sensor 1 0.00 %
voltage Kl. 87 14.12 V



2E98:
2E98 Generator, communication
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
Timeout

Freeze Frame Information
Event 1Odometer 66200kms 41134miles
time since start end 3,072.00 s
manufacturer code Generator 1 0.00 -
characteristics generator type generator 1 6.00 -
Battery Voltage 10.75 V

Event 2Odometer 66208kms 41139miles
time since start end 230.40 s
manufacturer code Generator 1 0.00 -
characteristics generator type generator 1 6.00 -
Battery Voltage 15.87 V

Event 3Odometer 66208kms 41139miles
time since start end 204.80 s
manufacturer code Generator 1 255.00 -
characteristics generator type generator 1 255.00 -
Battery Voltage 13.06 V



2AAF:
2AAF Fuel pump, plausibility
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
Short circuit or signal interruption

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
fuel pressure before mass control valve 3,311.39 hPa
Engine speed 3,712.00 rpm
voltage Kl. 87 10.16 V
injected mass of fuel 64.00 l/h



CDA1:
CDA1 Message (steering wheel angle, C4)
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Timeout

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
Engine speed 1,664.00 rpm
control unit inside temperature 42.00 C
voltage Kl. 87 17.57 V
status motor control 2.00 0-n

Event 2Odometer 66208kms 41139miles
Engine speed 992.00 rpm
control unit inside temperature 42.00 C
voltage Kl. 87 16.25 V
status motor control 2.00 0-n

Event 3Odometer 66208kms 41139miles
Engine speed 928.00 rpm
control unit inside temperature 46.50 C
voltage Kl. 87 17.06 V
status motor control 2.00 0-n



CD95:
CD95 Message (operation cruise control/ACC active cruise control, 194)
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Timeout

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
Engine speed 1,408.00 rpm
control unit inside temperature 42.00 C
voltage Kl. 87 17.37 V
status motor control 2.00 0-n

Event 2Odometer 66208kms 41139miles
Engine speed 1,120.00 rpm
control unit inside temperature 42.00 C
voltage Kl. 87 16.76 V
status motor control 2.00 0-n

Event 3Odometer 66208kms 41139miles
Engine speed 928.00 rpm
control unit inside temperature 46.50 C
voltage Kl. 87 17.16 V
status motor control 2.00 0-n



2DEB:
2DEB Power management, vehicle wiring system control
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Short circuit or signal interruption

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
Engine speed 736.00 rpm
battery voltage measured by IBS intelligent battery sensor 15.47 -
generator nominal voltage 14.00 V
voltage Kl. 87 14.02 V

Event 2Odometer 66208kms 41139miles
Engine speed 2,144.00 rpm
battery voltage measured by IBS intelligent battery sensor 18.03 -
generator nominal voltage 14.00 V
voltage Kl. 87 17.67 V

Event 3Odometer 66208kms 41139miles
Engine speed 736.00 rpm
battery voltage measured by IBS intelligent battery sensor 17.01 -
generator nominal voltage 14.00 V
voltage Kl. 87 16.55 V



2E82:
2E82 Elctrical cooling pump: switch off
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Signal or value below threshold

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
coolant temperature OBD 106.00 C
water pump voltage 18.20 V
water pump temperature electronics 95.00 C
water pump current adaption 0.50 A

Event 2Odometer 66208kms 41139miles
coolant temperature OBD 111.00 C
water pump voltage 18.50 V
water pump temperature electronics 85.00 C
water pump current adaption 0.50 A

Event 3Odometer 66208kms 41139miles
coolant temperature OBD 92.00 C
water pump voltage 17.60 V
water pump temperature electronics 69.00 C
water pump current adaption 0.00 A




SHADOW FAULT CODES

MSD80/MSD81 Engine module for N53/N54
Module Identification


Hardware Number 7611397
Hardware Vesion Number 00
Coding Index 17
DiagnosticIndex 0000
VariantIndex 3333
Date of ECU Manufacturing 20070521
System Supplier Siemens
Message Catalog Version 0.0.0
Software Version 0.0.0
OS Version 0.0.0


Current Shadow Fault Codes

2FDB:

Error will not cause a warning light
Error is not currently present
Test conditions have been completed
Short circuit or signal interruption



29F5:
29F5 Catalytic converter conversion 2
Error will cause a warning light
Error is not currently present
Test conditions have been completed
Short circuit or signal interruption

Freeze Frame Information
Event 1Odometer 64640kms 40165miles
Engine speed 1,280.00 rpm
air mass calculated 200.76 mg/stk
Engine temperature 93.75 C
Intake air temperature 23.25 C

Event 2Odometer 64768kms 40244miles
Engine speed 1,696.00 rpm
air mass calculated 200.76 mg/stk
Engine temperature 94.50 C
Intake air temperature 16.50 C

Event 3Odometer 65752kms 40856miles
Engine speed 2,176.00 rpm
air mass calculated 75.96 mg/stk
Engine temperature 99.00 C
Intake air temperature 26.25 C



29F4:
29F4 Catalytic converter conversion
Error will cause a warning light
Error is not currently present
Test conditions have been completed

Freeze Frame Information
Event 1Odometer 64640kms 40165miles
Engine speed 1,952.00 rpm
air mass calculated 195.33 mg/stk
Engine temperature 103.50 C
Intake air temperature 26.25 C

Event 2Odometer 64768kms 40244miles
Engine speed 1,440.00 rpm
air mass calculated 189.91 mg/stk
Engine temperature 92.25 C
Intake air temperature 15.75 C

Event 3Odometer 65752kms 40856miles
Engine speed 2,400.00 rpm
air mass calculated 108.52 mg/stk
Engine temperature 100.50 C
Intake air temperature 25.50 C



2F6C:
2F6C Exhaust fumeflap, input signal
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Timeout

Freeze Frame Information
Event 1Odometer 65536kms 40722miles
Speed 50.00 km/h
time since start end 153.60 s
pedal sensor 1 16.80 %
voltage Kl. 87 13.91 V

Event 2Odometer 65592kms 40756miles
Speed 101.00 km/h
time since start end 281.60 s
pedal sensor 1 47.66 %
voltage Kl. 87 14.12 V

Event 3Odometer 66208kms 41139miles
Speed 0.00 km/h
time since start end 0.00 s
pedal sensor 1 0.00 %
voltage Kl. 87 14.12 V



2E98:
2E98 Generator, communication
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
Timeout

Freeze Frame Information
Event 1Odometer 66200kms 41134miles
time since start end 3,072.00 s
manufacturer code Generator 1 0.00 -
characteristics generator type generator 1 6.00 -
Battery Voltage 10.75 V

Event 2Odometer 66208kms 41139miles
time since start end 230.40 s
manufacturer code Generator 1 0.00 -
characteristics generator type generator 1 6.00 -
Battery Voltage 15.87 V

Event 3Odometer 66208kms 41139miles
time since start end 204.80 s
manufacturer code Generator 1 255.00 -
characteristics generator type generator 1 255.00 -
Battery Voltage 13.06 V



2AAF:
2AAF Fuel pump, plausibility
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
Short circuit or signal interruption

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
fuel pressure before mass control valve 3,311.39 hPa
Engine speed 3,712.00 rpm
voltage Kl. 87 10.16 V
injected mass of fuel 64.00 l/h



CDA1:
CDA1 Message (steering wheel angle, C4)
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Timeout

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
Engine speed 1,664.00 rpm
control unit inside temperature 42.00 C
voltage Kl. 87 17.57 V
status motor control 2.00 0-n

Event 2Odometer 66208kms 41139miles
Engine speed 992.00 rpm
control unit inside temperature 42.00 C
voltage Kl. 87 16.25 V
status motor control 2.00 0-n

Event 3Odometer 66208kms 41139miles
Engine speed 928.00 rpm
control unit inside temperature 46.50 C
voltage Kl. 87 17.06 V
status motor control 2.00 0-n



CD95:
CD95 Message (operation cruise control/ACC active cruise control, 194)
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Timeout

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
Engine speed 1,408.00 rpm
control unit inside temperature 42.00 C
voltage Kl. 87 17.37 V
status motor control 2.00 0-n

Event 2Odometer 66208kms 41139miles
Engine speed 1,120.00 rpm
control unit inside temperature 42.00 C
voltage Kl. 87 16.76 V
status motor control 2.00 0-n

Event 3Odometer 66208kms 41139miles
Engine speed 928.00 rpm
control unit inside temperature 46.50 C
voltage Kl. 87 17.16 V
status motor control 2.00 0-n



2AD0:
2AD0 Gear control
Error will not cause a warning light
Error is currently present
Test conditions have been completed

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
motor status 2.00 0-n
calculated gear 3.00 -
status motor control 2.00 0-n
voltage Kl. 87 15.74 V

Event 2Odometer 66208kms 41139miles
motor status 1.00 0-n
calculated gear 0.00 -
status motor control 2.00 0-n
voltage Kl. 87 11.98 V

Event 3Odometer 66208kms 41139miles
motor status 0.00 0-n
calculated gear 0.00 -
status motor control 0.00 0-n
voltage Kl. 87 12.49 V



2DEB:
2DEB Power management, vehicle wiring system control
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Short circuit or signal interruption

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
Engine speed 736.00 rpm
battery voltage measured by IBS intelligent battery sensor 15.47 -
generator nominal voltage 14.00 V
voltage Kl. 87 14.02 V

Event 2Odometer 66208kms 41139miles
Engine speed 2,144.00 rpm
battery voltage measured by IBS intelligent battery sensor 18.03 -
generator nominal voltage 14.00 V
voltage Kl. 87 17.67 V

Event 3Odometer 66208kms 41139miles
Engine speed 736.00 rpm
battery voltage measured by IBS intelligent battery sensor 17.14 -
generator nominal voltage 14.00 V
voltage Kl. 87 16.76 V



2E82:
2E82 Elctrical cooling pump: switch off
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Signal or value below threshold

Freeze Frame Information
Event 1Odometer 66208kms 41139miles
coolant temperature OBD 106.00 C
water pump voltage 18.20 V
water pump temperature electronics 95.00 C
water pump current adaption 0.50 A

Event 2Odometer 66208kms 41139miles
coolant temperature OBD 111.00 C
water pump voltage 18.50 V
water pump temperature electronics 85.00 C
water pump current adaption 0.50 A

Event 3Odometer 66208kms 41139miles
coolant temperature OBD 92.00 C
water pump voltage 17.60 V
water pump temperature electronics 69.00 C
water pump current adaption 0.00 A


TRANSMISSION MANAGEMENT

5014:
Supply voltage
Error will cause a warning light
Error is currently present
Test conditions have been completed
Short circuit or signal interruption



51B0:
DSC Signal not plausible: Brake pressure signal
Error will not cause a warning light
Error is currently present
Test conditions have been completed

CAR ACCES SYSTEM 3

A0B5:
Signal identification peed error
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
Short circuit or signal interruption

TRANSFER CASE

53FC:
53FC Clamp 30 voltage supply
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Short circuit or signal interruption



53FD:
53FD Clamp 30g voltage supply
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Short circuit or signal interruption



55C3:
55C3 VGSG-all-wheel-Notlaufregelung activated. No DXC index moment requirement.
Error will not cause a warning light
Error is not currently present
Test conditions have been completed

Sorry for any trouble i've may caused you guys trying to help and search for codes and such. If any tips now with the right codes will be greatly appriciated again. Thanks.
__________________
JB4+usb | P3 Vent Boost Gauge v2 | BMS OCC | BMS DCI | AMS FMIC | AR xi CL DP's | BT Tool | Edibias/NCSExpert/INPA BMW Coding | Cyba Quad Exhaust tips | M-Tech Rear & M3 Front Bumper | Red Cyba Air Scoops | Blacklines | Vinyl Overlays | ACS Roof Spoiler | Matte Black Grilles | LED Side Mirrors | Rear Euro Fogs | etc..
.
BES335xi is offline   Albania
0
Reply With Quote
      04-15-2012, 01:36 AM   #12
wickedgtr
Private
 
Drives: '07 335i dead / 09 335i
Join Date: Feb 2011
Location: Arizona

Posts: 77
iTrader: (0)

+1 on testing the battery

I got all of those errors (dash lights) on my e46 when the battery/alternator failed.

If you have a dc volt meter its easy to test:
With nothing powered on test the voltage - normally a fully charged lead-acid is around 12.8 volts, not sure if AGM is different but I would assume it's the same.

Next power on the headlamps, fans, radio etc with the engine off
The voltage will dip some, but should stay above 12v

When you start the car the voltage should be 13.2 - 14.5

Good luck, hopefully its something easy.
wickedgtr is offline  
0
Reply With Quote
      04-15-2012, 05:10 AM   #13
BES335xi
Colonel
 
BES335xi's Avatar
 
Drives: FBO+ N54xi
Join Date: Mar 2008
Location: Queens, NYC

Posts: 2,133
iTrader: (4)

Garage List
03/07 E90 335xi  [0.50]
Quote:
Originally Posted by wickedgtr
+1 on testing the battery

I got all of those errors (dash lights) on my e46 when the battery/alternator failed.

If you have a dc volt meter its easy to test:
With nothing powered on test the voltage - normally a fully charged lead-acid is around 12.8 volts, not sure if AGM is different but I would assume it's the same.

Next power on the headlamps, fans, radio etc with the engine off
The voltage will dip some, but should stay above 12v

When you start the car the voltage should be 13.2 - 14.5

Good luck, hopefully its something easy.
Reading from those codes seems that battery over charged to like 17v and i think it should not surpass 15, i just hope i didnt cause any damage to the motor/transmission as battery and water pump is easy fix a bit pricey though
__________________
JB4+usb | P3 Vent Boost Gauge v2 | BMS OCC | BMS DCI | AMS FMIC | AR xi CL DP's | BT Tool | Edibias/NCSExpert/INPA BMW Coding | Cyba Quad Exhaust tips | M-Tech Rear & M3 Front Bumper | Red Cyba Air Scoops | Blacklines | Vinyl Overlays | ACS Roof Spoiler | Matte Black Grilles | LED Side Mirrors | Rear Euro Fogs | etc..
.
BES335xi is offline   Albania
0
Reply With Quote
      04-15-2012, 02:50 PM   #14
BES335xi
Colonel
 
BES335xi's Avatar
 
Drives: FBO+ N54xi
Join Date: Mar 2008
Location: Queens, NYC

Posts: 2,133
iTrader: (4)

Garage List
03/07 E90 335xi  [0.50]
Weird my father went to get something from the car earlier, i was not home. And it took like a couple of tries with the keyfob pressing to unlock the car, and when it did unlock all the interior lights just shut off immidieately and after shutting the doors he could not get the car to lock. He did not try to turn it on though, i will try asaiget the chance to work on it...weird!
__________________
JB4+usb | P3 Vent Boost Gauge v2 | BMS OCC | BMS DCI | AMS FMIC | AR xi CL DP's | BT Tool | Edibias/NCSExpert/INPA BMW Coding | Cyba Quad Exhaust tips | M-Tech Rear & M3 Front Bumper | Red Cyba Air Scoops | Blacklines | Vinyl Overlays | ACS Roof Spoiler | Matte Black Grilles | LED Side Mirrors | Rear Euro Fogs | etc..
.
BES335xi is offline   Albania
0
Reply With Quote
      04-15-2012, 04:06 PM   #15
akotten
Major
 
akotten's Avatar
 
Drives: 2007 335xi
Join Date: Mar 2011
Location: Rapid City, SD

Posts: 1,032
iTrader: (2)

Quote:
Originally Posted by Bmw135er View Post
If you hear a brief grinding sound when you start and shut the car off, most likely it's the transfer case actuator motor. It does a self test/calibration when the key is cycled, and the teeth in the moor are probably stripped. That's the noise that you're hearing. You can get it separately from the transfer case and it's a fairly easy swap.

This.

Same symptoms as when mine failed. Also, this should probably be in the xi section.
__________________
TC Kline S/A | Vorshlag Camber Plates | ///M Bushings & ARB | CP-e DPs | VRSF FMIC | Procede 2.5 w/ OpenFlash | DCI |
akotten is offline  
0
Reply With Quote
      04-15-2012, 07:01 PM   #16
BES335xi
Colonel
 
BES335xi's Avatar
 
Drives: FBO+ N54xi
Join Date: Mar 2008
Location: Queens, NYC

Posts: 2,133
iTrader: (4)

Garage List
03/07 E90 335xi  [0.50]
Quote:
Originally Posted by akotten
Quote:
Originally Posted by Bmw135er View Post
If you hear a brief grinding sound when you start and shut the car off, most likely it's the transfer case actuator motor. It does a self test/calibration when the key is cycled, and the teeth in the moor are probably stripped. That's the noise that you're hearing. You can get it separately from the transfer case and it's a fairly easy swap.

This.

Same symptoms as when mine failed. Also, this should probably be in the xi section.
my car died, no battery so we dont know where this thread should really be or what really is wrong with my car...it caught me on a weekend and cant do much, but i will update it when i find out whts wrong...
__________________
JB4+usb | P3 Vent Boost Gauge v2 | BMS OCC | BMS DCI | AMS FMIC | AR xi CL DP's | BT Tool | Edibias/NCSExpert/INPA BMW Coding | Cyba Quad Exhaust tips | M-Tech Rear & M3 Front Bumper | Red Cyba Air Scoops | Blacklines | Vinyl Overlays | ACS Roof Spoiler | Matte Black Grilles | LED Side Mirrors | Rear Euro Fogs | etc..
.
BES335xi is offline   Albania
0
Reply With Quote
      04-22-2012, 06:21 PM   #17
BES335xi
Colonel
 
BES335xi's Avatar
 
Drives: FBO+ N54xi
Join Date: Mar 2008
Location: Queens, NYC

Posts: 2,133
iTrader: (4)

Garage List
03/07 E90 335xi  [0.50]
Thought i'd update this thread just incase someone ever goes through this, so basically my battery would over charge and undercharge from 10v - 18v, i dont know what caused it, but that caused my car throwing all sorts of codes you can think off and it got me worried as hell... maybe the oil i leaked or maybe when i pressure washed my engine but i had to replace the Alternator to get me up and running also replaced and registered the battery. A bit of an expensive fix but glad it was something too serious like transmission or w.e.
__________________
JB4+usb | P3 Vent Boost Gauge v2 | BMS OCC | BMS DCI | AMS FMIC | AR xi CL DP's | BT Tool | Edibias/NCSExpert/INPA BMW Coding | Cyba Quad Exhaust tips | M-Tech Rear & M3 Front Bumper | Red Cyba Air Scoops | Blacklines | Vinyl Overlays | ACS Roof Spoiler | Matte Black Grilles | LED Side Mirrors | Rear Euro Fogs | etc..
.
BES335xi is offline   Albania
0
Reply With Quote
      04-22-2012, 07:34 PM   #18
akotten
Major
 
akotten's Avatar
 
Drives: 2007 335xi
Join Date: Mar 2011
Location: Rapid City, SD

Posts: 1,032
iTrader: (2)

Quote:
Originally Posted by BES335xi View Post
Thought i'd update this thread just incase someone ever goes through this, so basically my battery would over charge and undercharge from 10v - 18v, i dont know what caused it, but that caused my car throwing all sorts of codes you can think off and it got me worried as hell... maybe the oil i leaked or maybe when i pressure washed my engine but i had to replace the Alternator to get me up and running also replaced and registered the battery. A bit of an expensive fix but glad it was something too serious like transmission or w.e.
There's your problem lol.

But hey, glad to hear it wasn't your transfer case after all!
__________________
TC Kline S/A | Vorshlag Camber Plates | ///M Bushings & ARB | CP-e DPs | VRSF FMIC | Procede 2.5 w/ OpenFlash | DCI |
akotten is offline  
0
Reply With Quote
      09-25-2012, 11:48 AM   #19
cdtwietmeyer
New Member
 
Drives: 2007 335xi
Join Date: Sep 2012
Location: Florida

Posts: 9
iTrader: (0)

Same problem?

Hi guys. New to the forum, but i've been a long time bmw fan.

I've been having a similar, if not the same, issue. Can anyone confirm my lights are showing the same problem?

This combination of lights on the dash started a few months ago and has been occurring with increasing frequency. Sometimes they appear when the car starts up, sometimes after I have been driving for a while.

Any help would be wonderful as I do not have the extended warranty and i'm hesitant to take to my BMW dealership for service without having any idea of the problem.

Thanks!
Attached Images
 
cdtwietmeyer is offline  
0
Reply With Quote
      09-25-2012, 05:37 PM   #20
akotten
Major
 
akotten's Avatar
 
Drives: 2007 335xi
Join Date: Mar 2011
Location: Rapid City, SD

Posts: 1,032
iTrader: (2)

Quote:
Originally Posted by cdtwietmeyer View Post
Hi guys. New to the forum, but i've been a long time bmw fan.

I've been having a similar, if not the same, issue. Can anyone confirm my lights are showing the same problem?

This combination of lights on the dash started a few months ago and has been occurring with increasing frequency. Sometimes they appear when the car starts up, sometimes after I have been driving for a while.

Any help would be wonderful as I do not have the extended warranty and i'm hesitant to take to my BMW dealership for service without having any idea of the problem.

Thanks!
Those look like the lights I get after unplugging the battery for a bit. I would start by checking your battery voltage as suggested above.
__________________
TC Kline S/A | Vorshlag Camber Plates | ///M Bushings & ARB | CP-e DPs | VRSF FMIC | Procede 2.5 w/ OpenFlash | DCI |
akotten is offline  
0
Reply With Quote
      09-25-2012, 05:41 PM   #21
JamesM3M5
Some dude
 
Drives: E28 M5, E92 335i
Join Date: Sep 2011
Location: Northern VA

Posts: 1,647
iTrader: (0)

You can buy a BT tool to scan all those systems for codes cheaper than one trip to the dealer for a checkout. They charge for diagnostics even if you get the work done there. For me, I charge diags only if you want the codes read/problems figured out. If you get us to do the work, there is no diag fee.

Or call around to local independent shops that have an Autologic or GT1 to scan codes. Expect to pay $90-125 at an indy shop to get it checked out. It's hard to help over the Internet unless you know what the codes are.
__________________
RRT Racing
E92 335i/6MT Dinan Stage 3: intercooler, oil cooler, intake, flash, exhaust, LW dual-mass flywheel.
Vishnu PWM methanol custom trunk mount, Diffsonline 3-clutch Salisbury custom diff, Ohlins Road and Track coilovers, Vorshlag camber plates, much more...
E28 M5 w/ buncha stuff, R171 SLK350
JamesM3M5 is offline   United_States
0
Reply With Quote
      09-25-2012, 06:24 PM   #22
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: 917-939-4980
Join Date: Jun 2007
Location: New York

Posts: 18,255
iTrader: (5)

Send a message via Yahoo to cn555ic
Something to do with battery. Either battery is going dead or one of the terminals are loose off the battery
__________________

Coding E and F New York 917-939-4980
cn555ic is offline   United_States
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:58 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST