Macht Schnell Competition Wheel Spacer Kit for your BMW 3-series - BMW 3-Series (E90 E92) Forum

HP Autowerks · 09-27-2012, 05:59 PM

Machined from 6061-T6 aerospace aluminum, these adapters are strong as well as lightweight to limit unsprung/reciprocating weight for maximum performance on or off the track. Spacer edges are also chamfered to allow for easy installation/removal if needed. After machining, the spacers are then anodized for additional strength, anti-corrosion & wear resistance.

A wider track stance increases lateral stability as well as giving your BMW a much more aggressive appearance after installation. Spacers also are used to correct wheel gap normally seen on otherwise stock suspension setups, pushing the wheels outward - filling the fenders.

Included with our Competition Wheel Spacer Kits are a full set of extended lug bolts. All wheel fasteners are hardened and tempered to strength class 10.9 or 10 according to DIN/ISO standard 898 and meet the statutory requirements of all countries - including the US.

Competition Wheel Spacer kit Features:
- Machined from 6061-T6 aerospace aluminum
- Chamfered edges allows installation & removal quick and easy
- Black anodized finish for additional strength and corrosion/wear resistance
- Improve handling by reducing body roll with a wider wheel base
- Included zinc plated corrosion-resistant wheel fasteners

Competition Wheel Spacer kit Contents:
- (2) Competition Wheel Spacers
- (10) extended-length zinc plated coated wheel fasteners

Models Supported:
2008+ E82/8 1-Series & 1M
1992+ E36, E46 & E9X 3-Series & M3
2004+ E60/1 5-Series & M5
2005-2010 E63 6-Series & M6
1996-2002 E36 Z3 & Z3M
2003+ E85 & E89 Z4 & Z4M

Available in 3, 5, 10, 12, 15, 18 and 20mm sizes.

All spacer sizes are in stock!

Price starts at $49

Order here:

http://www.hpashop.com/Macht-Schnell...pacers-bmw.htm

abhishriv · 10-18-2012, 09:20 AM

i need a pair of 5mm and a pair of 10mm. but i have stud conversion so dont need the bolts.. can you instead substitute with the macht schnell nuts for the stud conversion?... dont want to use my expensive project kics in the winter

HP Autowerks · 02-17-2013, 02:17 PM

In stock!

dicostal · 02-25-2013, 03:57 PM

Must I buy longer bolts with 5mm spacers?

Thank you

tarponman85 · 04-29-2013, 10:14 PM

Please pm price for 10mm spacers with extended lugs.

HP Autowerks · 04-29-2013, 11:19 PM

Quote:

Originally Posted by dicostal

Must I buy longer bolts with 5mm spacers?

Thank you

Yes!

09-27-2012, 05:59 PM	#1
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	Macht Schnell Competition Wheel Spacer Kit for your BMW 3-series Machined from 6061-T6 aerospace aluminum, these adapters are strong as well as lightweight to limit unsprung/reciprocating weight for maximum performance on or off the track. Spacer edges are also chamfered to allow for easy installation/removal if needed. After machining, the spacers are then anodized for additional strength, anti-corrosion & wear resistance. A wider track stance increases lateral stability as well as giving your BMW a much more aggressive appearance after installation. Spacers also are used to correct wheel gap normally seen on otherwise stock suspension setups, pushing the wheels outward - filling the fenders. Included with our Competition Wheel Spacer Kits are a full set of extended lug bolts. All wheel fasteners are hardened and tempered to strength class 10.9 or 10 according to DIN/ISO standard 898 and meet the statutory requirements of all countries - including the US. Competition Wheel Spacer kit Features: - Machined from 6061-T6 aerospace aluminum - Chamfered edges allows installation & removal quick and easy - Black anodized finish for additional strength and corrosion/wear resistance - Improve handling by reducing body roll with a wider wheel base - Included zinc plated corrosion-resistant wheel fasteners Competition Wheel Spacer kit Contents: - (2) Competition Wheel Spacers - (10) extended-length zinc plated coated wheel fasteners Models Supported: 2008+ E82/8 1-Series & 1M 1992+ E36, E46 & E9X 3-Series & M3 2004+ E60/1 5-Series & M5 2005-2010 E63 6-Series & M6 1996-2002 E36 Z3 & Z3M 2003+ E85 & E89 Z4 & Z4M Available in 3, 5, 10, 12, 15, 18 and 20mm sizes. All spacer sizes are in stock! Price starts at $49 Order here: http://www.hpashop.com/Macht-Schnell...pacers-bmw.htm Attached Images
	Tweet

02-25-2013, 03:57 PM	#4
dicostal Second Lieutenant Drives: 2007 335i Join Date: Jun 2010 Location: Italian in CT - USA Posts: 273 iTrader: (0)	Must I buy longer bolts with 5mm spacers? Thank you __________________ GIAC stage II\|AA DP\|DCI\|HELIX FMIC

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-18-2012, 09:20 AM	#2
abhishriv Major Drives: 2007 335i Coupe (Space grey) Join Date: Oct 2011 Location: Toronto Posts: 1,095 iTrader: (0)	i need a pair of 5mm and a pair of 10mm. but i have stud conversion so dont need the bolts.. can you instead substitute with the macht schnell nuts for the stud conversion?... dont want to use my expensive project kics in the winter

02-17-2013, 02:17 PM	#3
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	In stock!

04-29-2013, 10:14 PM	#5
tarponman85 Private Drives: 335i Join Date: Jul 2012 Location: Miami Posts: 73 iTrader: (0)	Please pm price for 10mm spacers with extended lugs.