hi there guys, this diy is only if your car is damaged and for the people who just want to move the car in and out the garage or to loaded the car on to a truck so on. but if you want to go buy a new lead from the dealer thats up to you, am just showing you what to do when you dont have a new lead.

first of all i would like to say i done this to my car because i brought my car damaged and once the car gets damaged the car goes in to a safety mode, so you cant start the car. every thing else will works fine in the car.

the only way you can start your car is by buying a new positive lead or using a boster pack on front of the car or by passing the positive lead.

if you do use a boster pack and you start your car, your battery wont charge and it will show up on your dashboard of your car saying your battery is diying. once the battery dies, your boot will get locked. thats what happen to me and the dude from bmw came down to my garage and he open the boot for me and it wasnt easy for him it took him 45min or longer to open the boot.

Before you start on by passing the lead, you will have to take the battery out and you will see the red lead connected at bottom to take it out there is a 10mm nut and undo the nut and the lead will come out and then you can start work on the lead.

picture 1 = you can see a positive lead i have draw up, the reason why you can't start your car is. because of the black plastic which you can see in the diagram with the arrow under it and that plastic falls in the gap where the arrow is pointing so no current can go throught that means you cant start your car. the power that does go throught you cant start the car with that.

picture 2 = that is the red box which is around the positive lead which you have to cut open, once you open it you will see two positive leads with the plastic in between the leads. ( to open the red box i used a soldering gun to cut throught the plastic. )

in diagram one you can see the red positive lead that you have to pull out ( which is easy to do ) once you do that, take the black plastic out and enjoy the two leads up and your car will start.

picture 3 = the black safety plastic, stop the current going throught.

picture 4 = you can see the lead positive lead and where am pointing you can see a gap and thats where the safety plastic falls in to which stops the current.

hope this helps and am bad at explaining stuff over computer. if you dont understand it, send me a message and i will try my best to help you

thanks

__________________


E90 LCI M SPORT BUSINESS EDITION - STAY SAFE & HAPPY MOTORING