FORUMS
- 5
 |
 |
 |
 |
 
|
 |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
 |
|
BMW 3-Series (E90 E92) Forum
>
CAMBER Kits
|
 |
| 10-23-2012, 01:30 PM | #1 |
|
Why try to fit in when you were born to stand out.
|
CAMBER Kits
Hey guys I have a 2011 E90 Xdrive and will be lowering it in the near future with KWV1 and 19' staggered (235/265) setup. It's not going to be slammed or anything like that but i would like to keep the factory camber specs after lowering it to maximize tire wear......any suggestions on what type and where I can get camber kits for the front and rear.......thanks
appreciate your expertise on this..... |
 |
|
| 10-27-2012, 12:34 PM | #5 |
|
Why try to fit in when you were born to stand out.
|
No it's not jdm just didn't wanted to make sure there was not too much negative camber when I lower it I had to use camber kits in my 350z when I lowered that
|
|
|
|
| 10-27-2012, 04:35 PM | #6 |
|
Major
 
|
for the front you can get gc camber plates and for the back you can get megan racing camber kit arms
__________________
Member #431510
oem perf cf spoiler and front lip/m3strut brace/m3 subframe bushings/wavetrac lsd/ TMS solid diff bushings/MR adjustable toe arms/MR adjustable upper link/full m3 suspension/ecs tuning ss brake lines/GC coilovers./CPE dci's,catless dp,intercooler,charge pipe bov/BMS OCC/tuningtechfs tuned/RB pcv valve/defiv diff lockdownkit |
 |
|
 |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|
