FORUMS
- 5
|
|
![]() |
![]() |
![]() |
|
![]() |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
![]() |
|
BMW 3-Series (E90 E92) Forum
>
2C3E Error Code
|
![]() |
| 10-26-2012, 08:06 PM | #1 |
|
Colonel
![]() |
2C3E Error Code
I have had this ongoing issue with what appears to be my bank pre-cat o2 Sensor. I actually had this replaced 20k miles ago, but it is possible it could have been damaged again when the dealer replaced my turbos? or who knows.
2C3E: 2C3E Lambda probe in front of catalytic converter 2, control failure or cable transmission failure? Error will cause a warning light This will also be accompanied by mis-fires in my bank 2 cylinders 4-5-6. The interesting thing is when I re-cycle the car 1-2 times, everything runs fine until. This generally happens after the car has been driven for a long time and is very warm. Car drives great at WOT, etc. Generally starts having rough idle at stop lights after the car is warm. From other posts I have read, people just replace the pre cat bank 2 O2 sensor. I am tempted to have FFTEC replace my o2 when they swap my clutch out next wednesday. Any other ideas? I have new plugs, all my injectors are post recall and I am running a Procede 2.5 with the flexfuel kit.
__________________
2007 E92 6MT SGM: MusicarNW Level 2, Procede Rev 2.5, FFTEC/Vishnu LPFP with Flexfuel Sensor and Flash, M3 Offset V701's, WaveTrac LSD, Michelin PSS, Downpipes, M3 Control Arms, TCKline D/A Suspension, LCI Tail lights, Lux AE's, ER Charge Pipe, DCI's, Mtech Front and Rear, M3 Sideskirts, HPF Stage 1 Clutch
![]() |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|