DRL stay at same lightig level - BMW 3-Series (E90 E92) Forum

M.Etreby · 10-27-2012, 04:48 AM

Experts? can i keep the DRL beam staying at the same lighting level even when i switch on the lights? mainly I dont want it to dim

makkan00 · 10-27-2012, 05:14 AM

Quote:

Originally Posted by M.Etreby

Experts? can i keep the DRL beam staying at the same lighting level even when i switch on the lights? mainly I dont want it to dim

Yes, you should know advance coding.
Or
You can ask Grant to do it for you.

M.Etreby · 10-27-2012, 05:28 AM

Im in Egypt, i did some simple coding myself before, so there is no DIY for this one?

cn555ic · 10-27-2012, 07:36 AM

PWM_RL_BL_1_FKT_SL change to wert_01

Angels eyes stay same brightness regardless of what light is on. Code this line using NCSexpert. Good luck

missilewarriorz · 10-27-2012, 11:19 AM

Quote:

Originally Posted by cn555ic

PWM_RL_BL_1_FKT_SL change to wert_01

Angels eyes stay same brightness regardless of what light is on. Code this line using NCSexpert. Good luck

is this for lci?

cn555ic · 10-27-2012, 06:17 PM

This is for FRM2 module

M.Etreby · 10-28-2012, 09:02 AM

I found NFRM, and FRM don't have frm2, would the code be different because I searched for it and couldn't find it

cn555ic · 10-28-2012, 09:36 AM

Quote:

Originally Posted by M.Etreby

I found NFRM, and FRM don't have nfrm2, would the code be different, as I didn't find it when I processed the ecu

NFRM is fine. That's is FRM2 just named differently on NCS

M.Etreby · 10-28-2012, 10:06 AM

I couldn't find it as you described above, would it be written differently.
I go to NFRM module, then process the ecu to NFRM as well, I go to the trc file, and find lots of codes starting with pwm, but the rest is always different. Any thoughts

cn555ic · 10-28-2012, 01:13 PM

Quote:

Originally Posted by M.Etreby

I couldn't find it as you described above, would it be written differently.
I go to NFRM module, then process the ecu to NFRM as well, I go to the trc file, and find lots of codes starting with pwm, but the rest is always different. Any thoughts

You probably have the newer module frm3

M.Etreby · 10-28-2012, 02:48 PM

Quote:

Originally Posted by cn555ic

You probably have the newer module frm3

so!! can it be done, or what?

actually one of the screen in the NCSexpert, it writes down FRM3 blablabla.....FRM7
I added my TRC file if you want to take a look at it.

thanks alot for the support

cn555ic · 10-28-2012, 03:19 PM

Quote:

Originally Posted by M.Etreby

so!! can it be done, or what?

actually one of the screen in the NCSexpert, it writes down FRM3 blablabla.....FRM7
I added my TRC file if you want to take a look at it.

thanks alot for the support

You have FRM3. I don't know the value to change for that. Only FRM2. Sorry

M.Etreby · 10-29-2012, 04:32 PM

Quote:

Originally Posted by cn555ic

You have FRM3. I don't know the value to change for that. Only FRM2. Sorry

thanks alot for your efforts, can you direct me to someone who might be familiar with FRM3, or shall i start a new thread with FRM3 on the title?

cn555ic · 10-29-2012, 04:33 PM

I would start a new thread.

JustinGTP · 12-10-2012, 10:18 AM

Quote:

Originally Posted by cn555ic

PWM_RL_BL_1_FKT_SL change to wert_01

Angels eyes stay same brightness regardless of what light is on. Code this line using NCSexpert. Good luck

I have an E90 LCI (2009) with NFRM (FRM2). Do you know if this works? I might just try it and see.

Thanks!

cn555ic · 12-10-2012, 12:30 PM

Quote:

Originally Posted by JustinGTP

I have an E90 LCI (2009) with NFRM (FRM2). Do you know if this works? I might just try it and see.

Thanks!

YES...I have NFRM module on my car

JustinGTP · 12-10-2012, 12:45 PM

Quote:

Originally Posted by cn555ic

YES...I have NFRM module on my car

I'm going to do the following:

*AE brightness when parking lights: PWM_RL_BL_1_FKT_BL: wert_03 -> wert_01
*AE brightness when headlight on: PWM_RL_BL_1_FKT_SL: wert_07 -> wert_01

Other than that, which one in the module is the welcome light?

hackR10 · 01-31-2013, 10:05 AM

Quote:

Originally Posted by JustinGTP

I'm going to do the following:

*AE brightness when parking lights: PWM_RL_BL_1_FKT_BL: wert_03 -> wert_01
*AE brightness when headlight on: PWM_RL_BL_1_FKT_SL: wert_07 -> wert_01

Other than that, which one in the module is the welcome light?

did you get this to work?...

thx!

JustinGTP · 02-01-2013, 10:49 AM

Quote:

Originally Posted by hackR10

did you get this to work?...

thx!

Yes, it works, but I put it back to stock because at night, it looks like you have halogen blobs. Too bright. OEM is best.

hackR10 · 02-02-2013, 04:44 PM

Quote:

Originally Posted by JustinGTP

Yes, it works, but I put it back to stock because at night, it looks like you have halogen blobs. Too bright. OEM is best.

Justin (or anyone)...i enabled the DRL option for the AE thru NCS...all i'd like to do is increase the voltage to make them brighter - i DO NOT want to change the default setting of the AE for when the headlights are on, etc...

my head is spinning trying to sort out what is the field i need to change to increase the AE for DRL only...i have read that people feel this should be changed via NCSDummy - which i will do...i just need to know what field i change to make this happen for DRL only...

i have a 05/2008 built e91 sportswagon with adaptive xenon...

thanks...R

hackR10 · 02-03-2013, 08:22 AM

JustinGTP · 02-05-2013, 03:37 AM

Oh, I have an LCI car, I don't know. E90 LCI cars are already set to highest STOCK factory brightness for Corona Ring DRL.

10-27-2012, 04:48 AM	#1
M.Etreby Private Drives: Black Sapphire E90 330i Join Date: Aug 2011 Location: Egypt Posts: 57 iTrader: (0)	DRL stay at same lightig level Experts? can i keep the DRL beam staying at the same lighting level even when i switch on the lights? mainly I dont want it to dim __________________ M.Etreby "If you fail to plan, you plan to fail." Gloss Black Grills, 18"287 with 12mm H&R Spacers rear, and 10mm H&R Spacers front. PBx to come soon
	Tweet

10-27-2012, 05:28 AM	#3
M.Etreby Private Drives: Black Sapphire E90 330i Join Date: Aug 2011 Location: Egypt Posts: 57 iTrader: (0)	Im in Egypt, i did some simple coding myself before, so there is no DIY for this one? __________________ M.Etreby "If you fail to plan, you plan to fail." Gloss Black Grills, 18"287 with 12mm H&R Spacers rear, and 10mm H&R Spacers front. PBx to come soon

10-27-2012, 07:36 AM	#4
cn555ic The Coding Guy Drives: FBO 335i Vert meth/nitrous Join Date: Jun 2007 Location: Brooklyn, New York Posts: 17,872 iTrader: (5)	PWM_RL_BL_1_FKT_SL change to wert_01 Angels eyes stay same brightness regardless of what light is on. Code this line using NCSexpert. Good luck __________________ *CODING BMWs in N.Y Area 917-939-4980* Call or Text for more INFO

10-27-2012, 06:17 PM	#6
cn555ic The Coding Guy Drives: FBO 335i Vert meth/nitrous Join Date: Jun 2007 Location: Brooklyn, New York Posts: 17,872 iTrader: (5)	This is for FRM2 module __________________ *CODING BMWs in N.Y Area 917-939-4980* Call or Text for more INFO Last edited by cn555ic; 10-27-2012 at 06:46 PM.

10-28-2012, 09:02 AM	#7
M.Etreby Private Drives: Black Sapphire E90 330i Join Date: Aug 2011 Location: Egypt Posts: 57 iTrader: (0)	I found NFRM, and FRM don't have frm2, would the code be different because I searched for it and couldn't find it __________________ M.Etreby "If you fail to plan, you plan to fail." Gloss Black Grills, 18"287 with 12mm H&R Spacers rear, and 10mm H&R Spacers front. PBx to come soon

10-28-2012, 10:06 AM	#9
M.Etreby Private Drives: Black Sapphire E90 330i Join Date: Aug 2011 Location: Egypt Posts: 57 iTrader: (0)	I couldn't find it as you described above, would it be written differently. I go to NFRM module, then process the ecu to NFRM as well, I go to the trc file, and find lots of codes starting with pwm, but the rest is always different. Any thoughts __________________ M.Etreby "If you fail to plan, you plan to fail." Gloss Black Grills, 18"287 with 12mm H&R Spacers rear, and 10mm H&R Spacers front. PBx to come soon

10-29-2012, 04:33 PM	#14
cn555ic The Coding Guy Drives: FBO 335i Vert meth/nitrous Join Date: Jun 2007 Location: Brooklyn, New York Posts: 17,872 iTrader: (5)	I would start a new thread. __________________ *CODING BMWs in N.Y Area 917-939-4980* Call or Text for more INFO

02-03-2013, 08:22 AM	#21
hackR10 New Member Drives: 2008 328xi sportswagon-MT Join Date: Nov 2012 Location: Central NY, USA Posts: 7 iTrader: (0)

02-05-2013, 03:37 AM	#22
JustinGTP Second Lieutenant Drives: 2009 335i Sedan Join Date: Dec 2011 Location: Calgary, Alberta Posts: 286 iTrader: (0)	Oh, I have an LCI car, I don't know. E90 LCI cars are already set to highest STOCK factory brightness for Corona Ring DRL. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search