[LocDawgg]

My car has been stalling out on me when i slow down or stop at a red light. Sometimes while cruisng the car would shut off as well, the check engine light would come on. I finally decided to use a generic OBD II tool from autozone and came up with the code P0102 which indicates "Mass or Volume air flow A circuit low input"

Any fixes for this? I do have a AFE Intake on my BMW 325i.

[宝马.e90]

Something to do with your MAF so I'd check the intake(boot)/hoses since you did change it. If don't find anything, clear the code and see if it comes back, if it does then you'll know you have to fix something.

[mbp727]

Buy some MAF cleaner and check the intake/hose like mentioned above. I remember hearing that P0102 is a general fault code that can be related to a variety of issues but stalling at idle sounds like an air flow problem

[LocDawgg]

cleaned the MAF with some cleaner. But still came back...double checked the hoses and throttle body. still nothing. Maybe i should put my stock intake back on