BMW ST 2.11 - BMW 3-Series (E90 E92) Forum

RimasRS · 11-06-2012, 03:10 AM

Hello

Can anybody advice me

I had full (old) version of bmw standart tools now I downloaded ST 2.11 Instalation went fine but when I open INPA there is no car chasis to choose also CFGDAT folder is empty Im guessing there is no any DATEN files. BTW instalation file of BMW ST was 31 Mb is that normal?

Ive searched already few days for some kind of full version full pack but Im done couldnt find it anywhere. Could someone please share or advice me what to do? Im really exhausted already that thing drives me crazy. Where to get at least full pack of SP DATEN files.

Would appreciate so much

deepsrd · 11-09-2012, 07:11 AM

Quote:

Originally Posted by RimasRS

Hello

Can anybody advice me

I had full (old) version of bmw standart tools now I downloaded ST 2.11 Instalation went fine but when I open INPA there is no car chasis to choose
copy the code below to INPA.ini file into your INPA/CFGDAT folder(create one). If file exists, just copy over the lines below [CONFIG]
also CFGDAT folder is empty Im guessing there is no any DATEN files. BTW instalation file of BMW ST was 31 Mb is that normal?
It is normal. Only applications are included.

Ive searched already few days for some kind of full version full pack but Im done couldnt find it anywhere. Could someone please share or advice me what to do? Im really exhausted already that thing drives me crazy. Where to get at least full pack of SP DATEN files.
Download the specific daten files for your chassis, they are all over the net. Then copy the files over manually. You should be sorted for the daten files.

Would appreciate so much

Also, make sure you register your dll if you use Tool32 and WinKfp.

Code:

//**********************************************************************
//*
//* Nacharbeitsauswahl INPA
//*
//* Datei INPA.INI
//*
//**********************************************************************
//* Drexel TI-430
//**********************************************************************

[INFO]
VERSION               = 5.00
DATUM                 = 16.02.2004
VARIANTE              = ENGLISH

[ENVIRON]
DRUCKER               = WIN
PEM                   = JA
LANGUAGE              = ENGLISCH

[SCRIPT]
EDITOR                = WIN
SCRIPTSELECT          = LIST
DEFINI                = 

[CONFIG]
TITEL                 = BMW Diagnosis Program

F2                    = E87
F2_ARCHIV             = SGBD_E87

F3                    = E46
F3_ARCHIV             = SGBD_E46

F4                    = E60
F4_ARCHIV             = SGBD_E60

F5                    = E65
F5_ARCHIV             = SGBD_E65

F6                    = E85
F6_ARCHIV             = SGBD_E85

F7                    = E83
F7_ARCHIV             = SGBD_E83

F8                    = E53
F8_ARCHIV             = SGBD_E53

F13                   = Sonder
F13_KNOPF             = Special
F13_TEXT              = Special tests

F12                   = R50
F12_Text              = Mini R50
F12_ARCHIV            = SGBD_R50

F9                    = E90
F9_ARCHIV             = SGBD_E90

F15                   = RR1
F15_Text              = Rolls Royce RR1
F15_ARCHIV            = SGBD_RR1

F19                   = BMW_ALT
F19_KNOPF             = Old
F19_TEXT              = Old modells
F19_ARCHIV            = SGBD_BMW

[EXTRA]
SCRIPTS               = *

RimasRS · 11-11-2012, 04:32 AM

Quote:

Originally Posted by deepsrd

Also, make sure you register your dll if you use Tool32 and WinKfp.

Code:

//**********************************************************************
//*
//* Nacharbeitsauswahl INPA
//*
//* Datei INPA.INI
//*
//**********************************************************************
//* Drexel TI-430
//**********************************************************************

[INFO]
VERSION               = 5.00
DATUM                 = 16.02.2004
VARIANTE              = ENGLISH

[ENVIRON]
DRUCKER               = WIN
PEM                   = JA
LANGUAGE              = ENGLISCH

[SCRIPT]
EDITOR                = WIN
SCRIPTSELECT          = LIST
DEFINI                = 

[CONFIG]
TITEL                 = BMW Diagnosis Program

F2                    = E87
F2_ARCHIV             = SGBD_E87

F3                    = E46
F3_ARCHIV             = SGBD_E46

F4                    = E60
F4_ARCHIV             = SGBD_E60

F5                    = E65
F5_ARCHIV             = SGBD_E65

F6                    = E85
F6_ARCHIV             = SGBD_E85

F7                    = E83
F7_ARCHIV             = SGBD_E83

F8                    = E53
F8_ARCHIV             = SGBD_E53

F13                   = Sonder
F13_KNOPF             = Special
F13_TEXT              = Special tests

F12                   = R50
F12_Text              = Mini R50
F12_ARCHIV            = SGBD_R50

F9                    = E90
F9_ARCHIV             = SGBD_E90

F15                   = RR1
F15_Text              = Rolls Royce RR1
F15_ARCHIV            = SGBD_RR1

F19                   = BMW_ALT
F19_KNOPF             = Old
F19_TEXT              = Old modells
F19_ARCHIV            = SGBD_BMW

[EXTRA]
SCRIPTS               = *

Thanks guys appreciate... So some updates I did full INPA.ini file so I've get the chassis choice. Though some of the options wasn't working. But I found Back up folders from my old installation and now it looks like its back again (not sure will they work properly because those files was from older INPA version)

BTW how do I update .dll file what is the procedure?

deepsrd · 01-29-2013, 08:18 PM

Quote:

Originally Posted by RimasRS

Thanks guys appreciate... So some updates I did full INPA.ini file so I've get the chassis choice. Though some of the options wasn't working. But I found Back up folders from my old installation and now it looks like its back again (not sure will they work properly because those files was from older INPA version)

BTW how do I update .dll file what is the procedure?

Sorry for the late reply here..

WinKFP might throw an error saying ***.dll is missing. If you get this error, you will need to register the dlls, running the .bat files within the INPA folder should sort it out..
I will update here with the exact files..

j0ckinjz · 01-29-2013, 08:48 PM

What I did was get the files from the bmw coding success thread. Then installed 2.11. Then I copied all the missing files from the success thread download to my inpa, ediabas, and ncsexpert folders. Then I updated my daten files. Everything seems to be good so far. Although I did also have to replace/create my INPA.ini file like suggested above.

RimasRS · 01-30-2013, 12:34 PM

Quote:

Originally Posted by j0ckinjz

What I did was get the files from the bmw coding success thread. Then installed 2.11. Then I copied all the missing files from the success thread download to my inpa, ediabas, and ncsexpert folders. Then I updated my daten files. Everything seems to be good so far. Although I did also have to replace/create my INPA.ini file like suggested above.

Thanks for replies I'm not sure was my choice the right but I found back up files of my old inpa and copied them. For now it is ok will see how it is going.

Thanks again

Surly73 · 01-30-2013, 01:29 PM

Quote:

Originally Posted by RimasRS

Thanks for replies I'm not sure was my choice the right but I found back up files of my old inpa and copied them. For now it is ok will see how it is going.

Thanks again

Are your engine screens English? IN particular MSV80? If "yes", we should talk...

j0ckinjz · 01-30-2013, 03:46 PM

Quote:

Originally Posted by Surly73

Are your engine screens English? IN particular MSV80? If "yes", we should talk...

Has anyone ever gotten that in english, I just changed my battery yesterday and my msv70 (for '06) was in german.

RimasRS · 01-30-2013, 03:47 PM

Quote:

Originally Posted by Surly73

Are your engine screens English? IN particular MSV80? If "yes", we should talk...

Don't remember will hook up to car this weekend to do some coding will tell you then. But as I remember some of screens is in german some english

Surly73 · 01-30-2013, 04:38 PM

Quote:

Originally Posted by RimasRS

Don't remember will hook up to car this weekend to do some coding will tell you then. But as I remember some of screens is in german some english

I should clarify - INPA is my interest. NCS etc... all work fine for me.

cn555ic · 01-31-2013, 12:26 AM

Standard Tools 2.12 is already out..

RimasRS · 01-31-2013, 10:55 AM

Quote:

Originally Posted by cn555ic

Standard Tools 2.12 is already out..

Can you PM me where to find it...

Would really appreciate it

cn555ic · 01-31-2013, 12:31 PM

Have to look at into it for you as I dont remember where I got it from..New stuff NCSexpert can be used in 64 environment which is a plus but bad part is you can't edit a profile to manipulate anything, so basically its useless unless someone finds out what the password is or finds a patch to get it working..I played around with it yesterday and got it to work as far as getting it to now show a best-version error. I also got it working for INPA to be in English for MOST of all the DMEs...That part took a couple of weeks of my time

11-06-2012, 03:10 AM	#1
RimasRS Lieutenant Colonel Drives: 135i MT 2009 AW Join Date: Sep 2010 Location: Europe Posts: 1,749 iTrader: (0)	BMW ST 2.11 Hello Can anybody advice me I had full (old) version of bmw standart tools now I downloaded ST 2.11 Instalation went fine but when I open INPA there is no car chasis to choose also CFGDAT folder is empty Im guessing there is no any DATEN files. BTW instalation file of BMW ST was 31 Mb is that normal? Ive searched already few days for some kind of full version full pack but Im done couldnt find it anywhere. Could someone please share or advice me what to do? Im really exhausted already that thing drives me crazy. Where to get at least full pack of SP DATEN files. Would appreciate so much
	Tweet

01-29-2013, 08:48 PM	#5
j0ckinjz Private Drives: 2006 330xi Join Date: Nov 2012 Location: NY Posts: 52 iTrader: (0)	What I did was get the files from the bmw coding success thread. Then installed 2.11. Then I copied all the missing files from the success thread download to my inpa, ediabas, and ncsexpert folders. Then I updated my daten files. Everything seems to be good so far. Although I did also have to replace/create my INPA.ini file like suggested above. __________________

01-31-2013, 12:26 AM	#11
cn555ic The Coding Guy Drives: FBO 335i Vert meth/nitrous Join Date: Jun 2007 Location: Brooklyn, New York Posts: 17,907 iTrader: (5)	Standard Tools 2.12 is already out.. __________________ *CODING BMWs in N.Y Area 917-939-4980* Call or Text for more INFO

01-31-2013, 12:31 PM	#13
cn555ic The Coding Guy Drives: FBO 335i Vert meth/nitrous Join Date: Jun 2007 Location: Brooklyn, New York Posts: 17,907 iTrader: (5)	Have to look at into it for you as I dont remember where I got it from..New stuff NCSexpert can be used in 64 environment which is a plus but bad part is you can't edit a profile to manipulate anything, so basically its useless unless someone finds out what the password is or finds a patch to get it working..I played around with it yesterday and got it to work as far as getting it to now show a best-version error. I also got it working for INPA to be in English for MOST of all the DMEs...That part took a couple of weeks of my time __________________ *CODING BMWs in N.Y Area 917-939-4980* Call or Text for more INFO

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search