Login
![]() |
![]() |
![]() |
![]() |
![]() ![]() |
![]() |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
![]() |
![]() ![]() |
BMW 3-Series (E90 E92) Forum
>
Dry Engine Test
![]() |
![]() |
12-11-2012, 10:42 PM | #1 |
Lieutenant
![]() ![]() ![]() -44
Rep 479
Posts |
Dry Engine Test
I just saw this BWM Factory video in which they go into some detail on the engine building process. At 11:04 they discuss dry testing the engine in which they run it off of an electric motor w/o using gasoline....my question is if they have oil in the engine at this point or not? DRY?
![]() http://www.hulu.com/watch/213608 |
12-13-2012, 10:12 AM | #2 | |
Resident Septuagenarian
![]() 14
Rep 388
Posts |
Quote:
__________________
Johnny
Sent from my keyboard using hunt and peck... |
|
Appreciate
0
|
12-13-2012, 10:21 AM | #3 |
Brigadier General
![]() ![]() 201
Rep 4,341
Posts |
I have done the tour - there is definitely oil in the engine - they said they don't fire the engine with fuel for a few reasons, one is the cost - the save a zillion dollars if they don't have to burn a few ounces of fuel in a million less engines, no emissions issues to deal with and no danger of having to have fuel etc in the area.
M engines are still wet fired though.
__________________
2008 E93 335i, MHD, HPF IC, Injen Intake, AR DPs, Xhp TCU Flash
2016 X5 M-sport 35i JB Stage 1 2013 Mercedes C63 AMG, ROW airboxes, power pipe, Eurocharged V7 540 HP |
Appreciate
0
|
12-13-2012, 01:39 PM | #4 | |
Second Lieutenant
![]() 3
Rep 291
Posts
Drives: 2008 328i, with 3 pedals
Join Date: Jan 2008
Location: San Francisco Bay Area, USA
|
Quote:
Typically, when rebuilding an engine or assembling a new one, you use assembly lube on all parts that move. For example, all crank and cam bearings are laced with this lube prior to torquing the retaining bolts. I would imagine that BMW uses some form of lube during manufacturing. All virgin bearing surfaces need to "seat" themselves in the first few minutes of use and the right kind of lubricant, not just engine oil, is critical. This may be old school but one other reason to do an oil change early (after break in) is to remove not just metal shavings but also the assembly lube which ends up in the oil. Modern engines are built with very tight tolerances so the days of finding metal shavings of any magnitude are probably gone. Call me old fashioned, but I did an oil change at 1200 miles. |
|
Appreciate
0
|
![]() |
Bookmarks |
Thread Tools | Search this Thread |
|
|