E90Post
 


GT Haus
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > Suspension | Brakes | Chassis > M3 Upper & Lowerr control arms with stock shocks?



Reply
 
Thread Tools Search this Thread
      12-28-2012, 04:02 PM   #1
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,388
iTrader: (11)

M3 Upper & Lowerr control arms with stock shocks?

M3 Upper & Lowerr control arms with stock shocks?

I am in the process of redoing my suspension....way to much power LOL!!

I have a wavetrac/Quaife LSD being ordered tuesday (havent decided on wich one yet) and I have M3 Upper & Lower control arms also on the way (already ordered). They say they add a additional .75 of camber.....On my stock setup I removed the adjusting nipple and I am maxed out on camber I believe .85 and wondered if the M3 arms add aditional .75 to the maxed out stock camber or to just the stock adjustment. What I need to know is can I install these control arms with stock shocks and H&R springs or woulds camber plates be needed, if so I will wait because I will be getting BC BR coilovers/hotchkis sport sway bars in a month, I know the stock shocks + H&R springs suck LOL!!

I just do not like waiting and want to install these control arms ASAP LOL!!
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      12-28-2012, 04:51 PM   #2
DallasBoosted
Captain
 
DallasBoosted's Avatar
 
Drives: '08 E92 335i
Join Date: Apr 2012
Location: Dallas

Posts: 864
iTrader: (3)

Garage List
2008 BMW 335i  [5.00]
Doing the control arms with stock springs/dampers won't hurt anything. You won't notice a TON of difference, but it should be noticeable.
DallasBoosted is offline  
0
Reply With Quote
      12-28-2012, 04:54 PM   #3
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,388
iTrader: (11)

Quote:
Originally Posted by DallasBoosted View Post
Doing the control arms with stock springs/dampers won't hurt anything. You won't notice a TON of difference, but it should be noticeable.
awesome, my bushings are shot lol! I am sure when I install the coil overs/sways will be a big difference.
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      12-29-2012, 02:57 AM   #4
cbad335
Lieutenant Colonel
 
cbad335's Avatar
 
Drives: '09 E92 335i
Join Date: Jan 2008
Location: Cardiff-by-the-Sea, CA

Posts: 1,733
iTrader: (17)

Garage List
Consider waiting to install everything at the same time. That will save time and money, and only require one alignment, instead of two.
__________________

| 6MT | ZSP | ZPP |
cbad335 is offline   United_States
0
Reply With Quote
      12-29-2012, 03:08 AM   #5
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,388
iTrader: (11)

Quote:
Originally Posted by cbad335 View Post
Consider waiting to install everything at the same time. That will save time and money, and only require one alignment, instead of two.
I really need the LSD, spinning at 100 sucks lol!!
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 03:27 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST