E90Post
 


Lux Angel Eyes
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > Smoke from engine bay and exhaust after doing downpipes



Reply
 
Thread Tools Search this Thread
      12-22-2012, 05:05 PM   #1
brosey88
Enlisted Member
0

 
Drives: 2008 335xi
Join Date: Nov 2012
Location: ct


Posts: 36
iTrader: (0)

Smoke from engine bay and exhaust after doing downpipes. Please help!

I just bought my 2008 335xi a few weeks ago and last night i did cp-e catless downpipes AE exhaust and a jb 4 tuner. I noticed smoke coming from the engine bay and from the exhaust not sure what the issue is. I think it could be the turbo seals but not sure. The smoke only happens at idle and the car is not burning any oil. Please help!!

Last edited by brosey88; 01-13-2013 at 09:34 PM.
Appreciate 0
      12-22-2012, 05:12 PM   #2
Cripple
Captain
31

 
Cripple's Avatar
 
Drives: 14' M235I
Join Date: Dec 2012
Location: Canada


Posts: 666
iTrader: (3)

Typically most exhausts and downpipes are coated with a oil to prevent any sort of oxidation prior to customer installing. This way it maintains a healthy look when you open it out of the box. The smoke you are probably seeing are the oils applied to your DP's and Exhaust. It is nothing to worry about. Keep a eye on it though.
Appreciate 0
      12-22-2012, 05:16 PM   #3
brosey88
Enlisted Member
0

 
Drives: 2008 335xi
Join Date: Nov 2012
Location: ct


Posts: 36
iTrader: (0)

thats what i thought but the smoke from the engine bay is delayed like 30-60 seconds after start. im planning on putting it on a lift tomorrow to take a better look.
Appreciate 0
      12-22-2012, 06:21 PM   #4
WilliamS
GoofBall
United_States
15

 
Drives: 2008 E92 N54 Xdrive
Join Date: Jun 2012
Location: Tampa, FL


Posts: 875
iTrader: (1)

Its likely just residue. its starting late becuase they have to heat up. Drive the car, after a spirited run it will be done.
Appreciate 0
      12-22-2012, 09:32 PM   #5
benzy89
Banned
United_States
32

 
Drives: '08 E90 335i
Join Date: Jan 2012
Location: Northern NJ


Posts: 2,396
iTrader: (3)

Garage List
2008 BMW 335i  [3.75]
Residue that needs to be burned off or just smoke from going catless.


If you drive around & the smoke is still there once the engine's at normal operating temp (230-250), then you might wanna look into other possibilities (turbo seals, etc)
Appreciate 0
      12-23-2012, 09:56 PM   #6
ek99civic
BMW Noob
United_States
1

 
ek99civic's Avatar
 
Drives: 2008 335i
Join Date: Jan 2012
Location: AZ


Posts: 105
iTrader: (0)

Like everyone is saying, its normal. Replaced a header in the past and this same thing happened.
Appreciate 0
      12-24-2012, 12:04 AM   #7
themyst
Major General
South Korea
140

 
themyst's Avatar
 
Drives: E90 335i LCI
Join Date: Feb 2009
Location: NYC


Posts: 6,602
iTrader: (8)

Send a message via AIM to themyst
Quote:
Originally Posted by Cripple View Post
Typically most exhausts and downpipes are coated with a oil to prevent any sort of oxidation prior to customer installing. This way it maintains a healthy look when you open it out of the box. The smoke you are probably seeing are the oils applied to your DP's and Exhaust. It is nothing to worry about. Keep a eye on it though.
+1 it's oils and grease from the install itself causing your engine bay to smoke. It will happen on turbo installs too.
__________________
E90 LCI N54 6AT
Appreciate 0
      12-24-2012, 01:01 AM   #8
Jeff@TopGearSolutions
BimmerPost Supporting Vendor
United_States
290


 
Jeff@TopGearSolutions's Avatar
 
Drives: C6 Z06, GSXR-750, 09 335i
Join Date: Dec 2008
Location: TopGearSolutions.com


Posts: 17,996
iTrader: (32)

Send a message via AIM to Jeff@TopGearSolutions
Put on some miles and see if it goes away, it's likely residue from the manufacturing process of the exhaust components. Especially when doing mandrel bending.
Appreciate 0
      12-24-2012, 01:56 AM   #9
Stangorang
Major
United_States
46

 
Stangorang's Avatar
 
Drives: 2007 E90 335i
Join Date: Mar 2010
Location: SoCal


Posts: 1,207
iTrader: (9)

If you used anything like PB Blaster to loosen the nuts, this stuff will smoke like crazy once the components get hot. Goes away in a few minutes though.
Appreciate 0
      12-24-2012, 11:03 AM   #10
brosey88
Enlisted Member
0

 
Drives: 2008 335xi
Join Date: Nov 2012
Location: ct


Posts: 36
iTrader: (0)

thanks alot guys i put some miles on it yesterday and it seemed to be good just smelt like burning oil a little which is prob just the downpipes.
Appreciate 0
      01-13-2013, 08:49 PM   #11
brosey88
Enlisted Member
0

 
Drives: 2008 335xi
Join Date: Nov 2012
Location: ct


Posts: 36
iTrader: (0)

I am still having the problem and am thinking about just putting the stock downpipes back on because i can't seem to figure this thing out. I am not burning any oil at all but yet it smells like burning oil and only happens at idle
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 06:03 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST