FORUMS
- 5
 |
 |
 |
 |
 
|
 |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
 |
|
BMW 3-Series (E90 E92) Forum
>
BC BR Coilovers Owners - Damper settings please
|
 |
| 01-15-2013, 12:39 AM | #1 |
|
Colonel
 
|
BC BR Coilovers Owners - Damper settings please
Just as the title states, please post your damper settings that you use and why.
I'm currently using 13 from soft on the front and 10 from soft on the rear. I'm thinking about making them both softer...maybe 10 from soft on front and 8 from soft on the rear.
__________________
JB4 G5 ISO+BMS flash,Walbro 455 LPFP, DO meth kit 4-AN SS lines, BMS OCC, RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR kittyless Dps, Strett 2 oil OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 Strut Brace, M3 front sway-bar, Meyle HD tie-rods, HPA rear toe arms, Wavetrac LSD, DEFIV differential kit, BC Coil-overs, Power-Flex subframe bushings, stoptech slotted rotors, Rogue Tranny Mounts, Concept 1 CS-5.0 rims,
|
|
|
| 01-15-2013, 09:28 AM | #2 |
|
BimmerPost Supporting Vendor
 
|
Jesus that's soft rob. I have mine set at 2 clicks harder from the midway point on my front struts. The rear is set at 4 clicks harder from the midway point. That's for winter during summer I roll with it basically at the stiffest setting give or take
 |
 |
|
| 01-15-2013, 10:32 PM | #3 | |
|
Colonel
|
Quote:
__________________
JB4 G5 ISO+BMS flash,Walbro 455 LPFP, DO meth kit 4-AN SS lines, BMS OCC, RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR kittyless Dps, Strett 2 oil OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 Strut Brace, M3 front sway-bar, Meyle HD tie-rods, HPA rear toe arms, Wavetrac LSD, DEFIV differential kit, BC Coil-overs, Power-Flex subframe bushings, stoptech slotted rotors, Rogue Tranny Mounts, Concept 1 CS-5.0 rims,
|
|
|
|
|
| 01-15-2013, 10:35 PM | #4 | |
|
Colonel
|
Quote:
__________________
JB4 G5 ISO+BMS flash,Walbro 455 LPFP, DO meth kit 4-AN SS lines, BMS OCC, RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR kittyless Dps, Strett 2 oil OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 Strut Brace, M3 front sway-bar, Meyle HD tie-rods, HPA rear toe arms, Wavetrac LSD, DEFIV differential kit, BC Coil-overs, Power-Flex subframe bushings, stoptech slotted rotors, Rogue Tranny Mounts, Concept 1 CS-5.0 rims,
|
|
|
|
|
 |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|
