Login
![]() |
![]() |
![]() |
![]() |
![]() ![]() |
![]() |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
![]() |
![]() ![]() |
BMW 3-Series (E90 E92) Forum
>
questions about procede rev 2.5
![]() |
![]() |
01-19-2013, 11:41 AM | #1 |
Private First Class
![]() ![]() 3
Rep 102
Posts |
questions about procede rev 2.5
I have recently upgraded to the rev 2.5 with 9-10 aggressive maps stage 3 AT.
I have dci, downpipes, FMIC. I noticed that the default settings for the ignition correction is set at 100% and boost at 14psi. My previous 7-29 map, it was autotuned to 40% Ignition correction and 15psi 1. Since there is no autotuning for this map, these numbers won't change as I drive, right? 2. Does the acceleration feel significantly different with Ignition correction at 100% than from 30-40% 3. Default wastegate position is 50%. I never had the WG rattle, so will increasing it to 90% improve anything? I would greatly appreciate anyone's response. |
![]() |
Bookmarks |
Thread Tools | Search this Thread |
|
|