Bimmer Retrofit
BMW 3-Series (E90 E92) Forum > BMW E90/E92/E93 3-series General Forums > Regional Forums > Canada > Should I Reset Adaptation Values?

Thread Tools Search this Thread
      01-19-2013, 07:52 PM   #1
Charted Accountant
shaginwagon13's Avatar

Drives: BMW 335i Coupe
Join Date: Apr 2012
Location: Toronto

iTrader: (4)

Should I Reset Adaptation Values?

Hey guys,

I was getting misfires prior to the winter so I changed plugs, coils and all fluids.

After I changed the plugs and coils, I started getting misfire codes only at the first start-up of the day (in the mornings before I would drive to work). I never would get a misfire again for the rest of the day and they only seem to occur on cold mornings, never on warm ones. I would start the car, let it idle and I would get a misfire.

I was reading somewhere that sometimes you need to reset the adaptation values and was wondering if anyone has done this? Or has anyone experienced similar issues when changing plugs and coils?

I bought the BT scan tool and I have COBB so I can reset the values, I just don't know if I should.

Last edited by shaginwagon13; 01-19-2013 at 10:45 PM.
Appreciate 0


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 07:04 AM.

Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST