Anyone tried:LUK dual-mass flywheel - BMW 3-Series (E90 E92) Forum

335gtl · 02-03-2013, 10:00 AM

Hi, I was wondering if anyone had tried the LUK dual-mass flywheel from ecs tuning and had any feedback on it compared to the oe one.

Thanks

Rotorocious · 02-03-2013, 10:19 AM

I ordered one and its going in the car next week

JamesM3M5 · 02-03-2013, 10:50 AM

Luk is the original manufacturer for BMW and many others, so there should he no issues.

Carl Morris · 02-04-2013, 12:30 AM

I'm wondering if they would make the lighter weight version for the 1M in the older N54 bolt pattern? And then with stiffer springs for approximately twice the torque rating? I'm tempted to contact them...

phil200tdi · 02-04-2013, 03:22 AM

Quote:

Originally Posted by Carl Morris

I'm wondering if they would make the lighter weight version for the 1M in the older N54 bolt pattern? And then with stiffer springs for approximately twice the torque rating? I'm tempted to contact them...

Interesting!

Let us know what you find...

335gtl · 02-04-2013, 08:15 AM

Yes indeed! Also @ Rotorocious if you can give us some feedback after your install that would be great!

Thanks

3-Serious · 02-04-2013, 03:12 PM

I have LUK DMFW on my car right now with a spec stage 3+ clutch works perfectly fine.

Boost Tampa · 02-04-2013, 09:58 PM

I have one with an HPF clutch and it works great. Not much to review, it installs and behaves exactly like the OEM FW.

3-Serious · 02-04-2013, 10:15 PM

Quote:

Originally Posted by Surquhar

I have one with an HPF clutch and it works great. Not much to review, it installs and behaves exactly like the OEM FW.

Alpina_B3_Lux · 02-05-2013, 06:01 AM

Quote:

Originally Posted by Surquhar

I have one with an HPF clutch and it works great. Not much to review, it installs and behaves exactly like the OEM FW.

Well, considering it IS the OEM flywheel, this is not really surprising. I also have it in my car, combined with the HPF Feramic stage 1 clutch.

I notice however some vibrations under high load in low revs, which on "the other forum" has been attributed to the OEM FW; this problem is apparently solved with a single mass flywheel (steel or aluminium). It seems that in particular high hp cars with modified turbos have this issue.

Alpina_B3_Lux

335gtl · 02-05-2013, 11:41 AM

WOW! Thanks guys for all the feedback! That's pretty much what I needed to know. I will order the LUK instead of the oe one.

Rotorocious · 02-05-2013, 12:36 PM

Just checked on my car at the shop.
Oem one also said luk in the same place as the new one.
It's the same

ciomas · 02-11-2013, 06:56 AM

Is the dmfw to be replaced together with the clutch for best results? My flywheel is on its way out too :/ Does Luk only produce one 335 part or can you and up with a 'budget' option by mistake?

Rotorocious · 02-11-2013, 08:19 AM

Quote:

Originally Posted by ciomas

Is the dmfw to be replaced together with the clutch for best results? My flywheel is on its way out too :/ Does Luk only produce one 335 part or can you and up with a 'budget' option by mistake?

Yes, would be ideal to replace them both at the same time.
They only make one as far as I know.

02-03-2013, 10:00 AM	#1
335gtl New Member Drives: 335xi Join Date: Dec 2011 Location: montreal Posts: 15 iTrader: (0)	Anyone tried:LUK dual-mass flywheel Hi, I was wondering if anyone had tried the LUK dual-mass flywheel from ecs tuning and had any feedback on it compared to the oe one. Thanks
	Tweet

02-03-2013, 10:50 AM	#3
JamesM3M5 Some dude Drives: E28 M5, E92 335i Join Date: Sep 2011 Location: Northern VA Posts: 1,569 iTrader: (0)	Luk is the original manufacturer for BMW and many others, so there should he no issues. __________________ RRT Racing E92 335i/6MT Dinan Stage 3 intercooler, oil cooler, intake, flash. E28 M5, R171 SLK350

02-04-2013, 03:12 PM	#7
3-Serious Lieutenant Drives: AP e92 335i Join Date: Dec 2008 Location: New york Posts: 443 iTrader: (0)	I have LUK DMFW on my car right now with a spec stage 3+ clutch works perfectly fine. __________________ Cobb JR Tune, HFS-4, DCI, AMS Intercooler, Vishnu CP, Forge DV's, AR DP's, RPI exhaust, AR OCC, BMW STS, Spec stage 3+ clutch, CDV delete, H&R Coil overs, Quaife LSD, DefiV Lock down kit, WOTbox.

02-04-2013, 09:58 PM	#8
Boost Tampa Private First Class Drives: 2008 E92 Join Date: Jan 2011 Location: Florida Posts: 114 iTrader: (2)	I have one with an HPF clutch and it works great. Not much to review, it installs and behaves exactly like the OEM FW. __________________ JB4-G5/COBB BMS Flash/RB Turbos/HPF Clutch/Wavetrac/Dinan CAI/Forge DV's/ETS DP's/ETS 7" IC/ER CP/CM Meth/KWV2

02-11-2013, 06:56 AM	#13
ciomas Captain Drives: LCI e92 335 Join Date: Feb 2010 Location: london UK / 3city PL Posts: 654 iTrader: (0)	Is the dmfw to be replaced together with the clutch for best results? My flywheel is on its way out too :/ Does Luk only produce one 335 part or can you and up with a 'budget' option by mistake? __________________ Öhlins//Swift//M3 front suspension//M3 subframe bushes//Quaife LSD//AR Design Catless//Forge Intercooler//Alcon BBK//Goodridge//AFE//RPI//Fenders//JB4 Stage 2

02-03-2013, 10:19 AM	#2
Rotorocious Major Drives: 335i Join Date: May 2010 Location: Florida Posts: 1,224 iTrader: (3)	I ordered one and its going in the car next week

02-04-2013, 12:30 AM	#4
Carl Morris Lieutenant Drives: 2008 335xi 6MT Join Date: Feb 2012 Location: Boulder, CO Posts: 552 iTrader: (0)	I'm wondering if they would make the lighter weight version for the 1M in the older N54 bolt pattern? And then with stiffer springs for approximately twice the torque rating? I'm tempted to contact them...

02-04-2013, 08:15 AM	#6
335gtl New Member Drives: 335xi Join Date: Dec 2011 Location: montreal Posts: 15 iTrader: (0)	Yes indeed! Also @ Rotorocious if you can give us some feedback after your install that would be great! Thanks

02-05-2013, 11:41 AM	#11
335gtl New Member Drives: 335xi Join Date: Dec 2011 Location: montreal Posts: 15 iTrader: (0)	WOW! Thanks guys for all the feedback! That's pretty much what I needed to know. I will order the LUK instead of the oe one.

02-05-2013, 12:36 PM	#12
Rotorocious Major Drives: 335i Join Date: May 2010 Location: Florida Posts: 1,224 iTrader: (3)	Just checked on my car at the shop. Oem one also said luk in the same place as the new one. It's the same

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search