E90Post
 


VIBE Motorsports
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > Coded my mirrors to close as soon as I press lock on Keyfob



Reply
 
Thread Tools Search this Thread
      02-23-2014, 10:42 AM   #89
toicy4ya
First Lieutenant
 
toicy4ya's Avatar
 
Drives: 06 BMW 330XI
Join Date: Mar 2012
Location: NYC

Posts: 354
iTrader: (0)

No Luck, i cant seem to get it to work. Can someone give me a hand?

These are the following steps i took;

1. Load NCS >File>load profile “FSW PSW MAN”
2. F1>F3>select your chassis (E89 for E90 Models) >select “CAS”
3. Press F6 for back
4. Press F4 “process ecu” to select "CAS"
5. Select “READ ECU”
6. Open NETTODAT.trc and change value line 00300200 from "0F" to "00" (Note: I do not have value line 0030020 as mention in my previous post)
7. Save as NETTODAT.MAN
8 Go back to NCS now hit F5 for basic functions
9. Select "coapiCodeSgByNettoData"
10.On th Pop up under "cas.xxx" i typed "NETTODAT.MAN"
11.Then hit "Ok"

Didnt work!

I then tried the same process listed above but included the following steps;
12. Select F2 to change the job name to SG_CODIEREN
13.Hit "Ok"
14.Then press F3 to execute the job. The buttons greyed out for a moment, after which the message “Coding ended’ displayed.

It still didnt work! Can anyone tell me what i am doing wrong? At this point i will be happy just getting my mirrors to fold in again.

Thanks in advance.
__________________
2006 330XI BSM, Terra Cotta Leather Interior, ZSP, ZPP, ZWP, ZCV, Comfort Access, Adaptive Xenon, Steptronic, Logic 7, Nav w/ IDrive

toicy4ya is offline  
0
Reply With Quote
      02-23-2014, 12:53 PM   #90
joepcrepairs
Banned
 
Drives: 09 e92 335
Join Date: Feb 2014
Location: Norwalk, Ca

Posts: 118
iTrader: (0)

Quote:
Originally Posted by toicy4ya View Post
No Luck, i cant seem to get it to work. Can someone give me a hand?

These are the following steps i took;

1. Load NCS >File>load profile “FSW PSW MAN”
2. F1>F3>select your chassis (E89 for E90 Models) >select “CAS”
3. Press F6 for back
4. Press F4 “process ecu” to select "CAS"
5. Select “READ ECU”
6. Open NETTODAT.trc and change value line 00300200 from "0F" to "00" (Note: I do not have value line 0030020 as mention in my previous post)
7. Save as NETTODAT.MAN
8 Go back to NCS now hit F5 for basic functions
9. Select "coapiCodeSgByNettoData"
10.On th Pop up under "cas.xxx" i typed "NETTODAT.MAN"
11.Then hit "Ok"

Didnt work!

I then tried the same process listed above but included the following steps;
12. Select F2 to change the job name to SG_CODIEREN
13.Hit "Ok"
14.Then press F3 to execute the job. The buttons greyed out for a moment, after which the message “Coding ended’ displayed.

It still didnt work! Can anyone tell me what i am doing wrong? At this point i will be happy just getting my mirrors to fold in again.

Thanks in advance.
the lady steps you did you just reseting your cas middle back to factory .. you don't need to press sg c oderien etcc...

go Back again to read cas. enable closung mirriors with fob.e tc..

then sheet you do that you do the process of changing thenettodat thing. ..
joepcrepairs is offline   United_States
0
Reply With Quote
      02-23-2014, 02:12 PM   #91
toicy4ya
First Lieutenant
 
toicy4ya's Avatar
 
Drives: 06 BMW 330XI
Join Date: Mar 2012
Location: NYC

Posts: 354
iTrader: (0)

[/quote] go Back again to read cas. enable closung mirriors with fob.e tc..

then sheet you do that you do the process of changing thenettodat thing. ..[/quote]

I don't understand what you mean by this? Can you elaborate?

Thanks
__________________
2006 330XI BSM, Terra Cotta Leather Interior, ZSP, ZPP, ZWP, ZCV, Comfort Access, Adaptive Xenon, Steptronic, Logic 7, Nav w/ IDrive

toicy4ya is offline  
0
Reply With Quote
      02-23-2014, 02:23 PM   #92
joepcrepairs
Banned
 
Drives: 09 e92 335
Join Date: Feb 2014
Location: Norwalk, Ca

Posts: 118
iTrader: (0)

go Back again to read cas. enable closung mirriors with fob.e tc..

then sheet you do that you do the process of changing thenettodat thing. ..[/quote]

I don't understand what you mean by this? Can you elaborate?

Thanks[/quote]

sorry was on my phone when i wrote that.. lol

so what you need to do is go back and read your cas module.. then set one of this two values to aktiv:


this is for the mirrors to fold (note just one of this values will be on your trc)
ASP_KOMFORT_EINKLAPP
SPIEGEL_KOMFORT_EINKLAPP


and this is for the windows/moonroof
KOMFORTSCHLIESSUNG_FB


after you change those values to aktiv.... save trc as.man as usual.. then change job to sg coderien then execute job


after it does its thing dont close ncsexpert yet...

at this point go to your work folder
open the nettodat.trc file and locate that value that you already know where is it at 00300200 etcc then change OF to 00 then save as .man

now go to ncs expert, click basic functions then you know the rest.....................


if you still cant figure it out on your neext try i can help you remotely if you need me to.. let me know
joepcrepairs is offline   United_States
0
Reply With Quote
      02-23-2014, 06:00 PM   #93
toicy4ya
First Lieutenant
 
toicy4ya's Avatar
 
Drives: 06 BMW 330XI
Join Date: Mar 2012
Location: NYC

Posts: 354
iTrader: (0)

You were right, for some reason "SPIEGEL_KOMFORT_EINKLAPP" switched from "aktiv" to "nicht_aktiv" on its own. I was able to switch it back to "aktiv". All is well now.

Thanks again for all your help. It was greatly appreciated.
__________________
2006 330XI BSM, Terra Cotta Leather Interior, ZSP, ZPP, ZWP, ZCV, Comfort Access, Adaptive Xenon, Steptronic, Logic 7, Nav w/ IDrive


Last edited by toicy4ya; 02-23-2014 at 07:39 PM.
toicy4ya is offline  
0
Reply With Quote
      02-23-2014, 08:36 PM   #94
joepcrepairs
Banned
 
Drives: 09 e92 335
Join Date: Feb 2014
Location: Norwalk, Ca

Posts: 118
iTrader: (0)

Quote:
Originally Posted by toicy4ya View Post
You were right, for some reason "SPIEGEL_KOMFORT_EINKLAPP" switched from "aktiv" to "nicht_aktiv" on its own. I was able to switch it back to "aktiv". All is well now.

Thanks again for all your help. It was greatly appreciated.
im glad you got it working..
joepcrepairs is offline   United_States
0
Reply With Quote
      02-25-2014, 03:00 PM   #95
laurentProd
Private First Class
 
Drives: E93
Join Date: Feb 2013
Location: France

Posts: 109
iTrader: (0)

Hi all,

I managed to get it worked on my car (e93 with CA)

Key fob is okay but not the ridges on the doors...

That's very strange cauze cn555ic was able to make it worked...
"As soon as you press the ridges on the door handle the doors lock and mirrors fold in within a half second!!!"

When I touch the ridges, the car will just lock; mirrors won't fold.
Any clue?

Could someone plz share .trc files??
laurentProd is offline  
0
Reply With Quote
      02-25-2014, 04:18 PM   #96
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: Bimmerscoding.com
Join Date: Jun 2007
Location: New York

Posts: 18,278
iTrader: (5)

Send a message via Yahoo to cn555ic
Quote:
Originally Posted by laurentProd View Post
Hi all,

I managed to get it worked on my car (e93 with CA)

Key fob is okay but not the ridges on the doors...

That's very strange cauze cn555ic was able to make it worked...
"As soon as you press the ridges on the door handle the doors lock and mirrors fold in within a half second!!!"

When I touch the ridges, the car will just lock; mirrors won't fold.
Any clue?

Could someone plz share .trc files??

Try to code the CAS module...

Look for FH_komfortF_mit_subst and set that to aktiv
cn555ic is offline   United_States
0
Reply With Quote
      02-25-2014, 04:18 PM   #97
laurentProd
Private First Class
 
Drives: E93
Join Date: Feb 2013
Location: France

Posts: 109
iTrader: (0)

oh ok !

I'll give it a try !
Thanks man !
laurentProd is offline  
0
Reply With Quote
      02-25-2014, 04:21 PM   #98
laurentProd
Private First Class
 
Drives: E93
Join Date: Feb 2013
Location: France

Posts: 109
iTrader: (0)

hum, just check my .trc file and indeed FH_KOMFORTF_MIT_SUBST is set to nicht_aktiv ...

I'll try tomorrow !
laurentProd is offline  
0
Reply With Quote
      02-25-2014, 04:27 PM   #99
joepcrepairs
Banned
 
Drives: 09 e92 335
Join Date: Feb 2014
Location: Norwalk, Ca

Posts: 118
iTrader: (0)

Quote:
Originally Posted by laurentProd View Post
hum, just check my .trc file and indeed FH_KOMFORTF_MIT_SUBST is set to nicht_aktiv ...

I'll try tomorrow !
just watch this video

joepcrepairs is offline   United_States
0
Reply With Quote
      02-25-2014, 04:34 PM   #100
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: Bimmerscoding.com
Join Date: Jun 2007
Location: New York

Posts: 18,278
iTrader: (5)

Send a message via Yahoo to cn555ic
Listen Joe...Please make your own thread and post all the videos you want...Dont clutter this thread with your videos...What he is asking has nothing to do with the video.

I am sure your way works best for you to change NETTODAT but this DIY shows people to use the NCSdummies...ALot of people especially beginners feel more comfortable using NCSDummies.
cn555ic is offline   United_States
0
Reply With Quote
      02-25-2014, 04:39 PM   #101
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: Bimmerscoding.com
Join Date: Jun 2007
Location: New York

Posts: 18,278
iTrader: (5)

Send a message via Yahoo to cn555ic
Quote:
Originally Posted by laurentProd View Post
hum, just check my .trc file and indeed FH_KOMFORTF_MIT_SUBST is set to nicht_aktiv ...

I'll try tomorrow !
Let me know if it works..
cn555ic is offline   United_States
0
Reply With Quote
      02-25-2014, 04:45 PM   #102
laurentProd
Private First Class
 
Drives: E93
Join Date: Feb 2013
Location: France

Posts: 109
iTrader: (0)

Hey don't fight guys!
We are here to share XP...

@************
Thanks for the vid but as I told before everything is working fine except the rigdes, but thanks. We all know you want to help and this just super
Keep it up !

cn555ic thanks again for the info :-) don't be so rude man
(even if you are true )
laurentProd is offline  
0
Reply With Quote
      02-25-2014, 05:36 PM   #103
Nedal0
New Member
 
Drives: E93
Join Date: Oct 2013
Location: North West, UK

Posts: 14
iTrader: (0)

Calm down guys. TRC works for some people and NCSdummies work for others. The whole point of threads is to share no matter the shape and form of the information involved.

We all learn bits and pieces from one another so let there be calm and lets all get along.
Nedal0 is offline  
0
Reply With Quote
      02-25-2014, 11:18 PM   #104
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: Bimmerscoding.com
Join Date: Jun 2007
Location: New York

Posts: 18,278
iTrader: (5)

Send a message via Yahoo to cn555ic
Quote:
Originally Posted by Nedal0 View Post
Calm down guys. TRC works for some people and NCSdummies work for others. The whole point of threads is to share no matter the shape and form of the information involved.

We all learn bits and pieces from one another so let there be calm and lets all get along.
I am not arguing with anyone. Just stating the more ways to do something is great and all but it takes away from the thread when you show too many ways to beginners. Too much info. It's fine and great to show other ways but make another thread on it. I have been on this forum for awhile and when I read threads that are all over the place at the beginning when I first tried to learn coding. It was confusing as hell.
cn555ic is offline   United_States
0
Reply With Quote
      02-25-2014, 11:19 PM   #105
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: Bimmerscoding.com
Join Date: Jun 2007
Location: New York

Posts: 18,278
iTrader: (5)

Send a message via Yahoo to cn555ic
Quote:
Originally Posted by laurentProd View Post
Hey don't fight guys!
We are here to share XP...

@************
Thanks for the vid but as I told before everything is working fine except the rigdes, but thanks. We all know you want to help and this just super
Keep it up !

cn555ic thanks again for the info :-) don't be so rude man
(even if you are true )
I am not saying it will work but keep me posted.
cn555ic is offline   United_States
0
Reply With Quote
      02-25-2014, 11:21 PM   #106
lilez19
Second Lieutenant
 
Drives: 2011 335i sedan
Join Date: Jul 2013
Location: Houston

Posts: 256
iTrader: (0)

Nice
lilez19 is offline   United_States
0
Reply With Quote
      02-26-2014, 01:25 PM   #107
laurentProd
Private First Class
 
Drives: E93
Join Date: Feb 2013
Location: France

Posts: 109
iTrader: (0)

Well, some news...

I tried what you said cn555ic but it didn't work...
FH_KOMFORTF_MIT_SUBST --> aktiv

so I made a search in the .trc file and found :
KOMFORTSCHLIESSUNG_PA set to nicht_aktiv...

After changing the value to aktiv, well, it workssssss !!



Thanks everyone !!
laurentProd is offline  
0
Reply With Quote
      02-26-2014, 04:17 PM   #108
joepcrepairs
Banned
 
Drives: 09 e92 335
Join Date: Feb 2014
Location: Norwalk, Ca

Posts: 118
iTrader: (0)

Quote:
Originally Posted by laurentProd View Post
Hi all,

I managed to get it worked on my car (e93 with CA)

Key fob is okay but not the ridges on the doors...

That's very strange cauze cn555ic was able to make it worked...
"As soon as you press the ridges on the door handle the doors lock and mirrors fold in within a half second!!!"

When I touch the ridges, the car will just lock; mirrors won't fold.
Any clue?

Could someone plz share .trc files??
heres a copy of my current trc
Attached Files
File Type: txt cas.txt (7.0 KB, 93 views)
joepcrepairs is offline   United_States
0
Reply With Quote
      02-26-2014, 05:35 PM   #109
laurentProd
Private First Class
 
Drives: E93
Join Date: Feb 2013
Location: France

Posts: 109
iTrader: (0)

Thanks ************ !
Could be helpful for others
laurentProd is offline  
0
Reply With Quote
      03-03-2014, 08:37 AM   #110
dwells
ಠ_ಠ
 
dwells's Avatar
 
Drives: Monaco Blue 335i coupe
Join Date: Nov 2010
Location: New England

Posts: 1,521
iTrader: (5)

There's no need for NETTODAT coding or any sort of manual editing, just do it the proper way by actually adding new parameters.
  1. Read the module with NCS Expert to a FSW_PSW.TRC and take note of the .Cxx version of the module daten that is displayed.
  2. Open that version of the CAS module daten with NCS Dummy.
  3. Locate the KMFRT_SCHLIESSEN function and right click it and select "add parameter."
  4. Punch in whatever you want for a name (I usually use a descriptive term that matches BMW's naming scheme).
  5. Enter your desired time for a value. This is in deciseconds (tenths of a second) and in hexadecimal. So as mentioned in the first post, 00 for 0.0 seconds, 05 for 0.5 seconds, 0C for 1.2 seconds, etc.
  6. Write your changes back to the module daten with the Module Functions > Update Module button.
  7. Load in your trace file, scroll or search to KMFRT_SCHLIESSEN, and you'll see your new custom parameter listed. Tick the box, then click the Trace Functions > Export FSW_PSW.TRC.
  8. Code the module as normal with NCS Expert.

This is the truly "correct" way of doing it - rather than hacking in a custom value directly into the NETTODAT, you're actually creating a custom parameter with the desired value in the daten file for that module. Then the standard FSW_PSW.TRC is being modified to specify the name of that parameter. When NCS Expert codes the module, it sees the parameter name you created, consults the daten file, sees the parameter name and definition (your custom value), and writes the binary value to the module accordingly.

There's a few benefits of doing things this way other than it just being the proper means of doing so. First, you're actually updating the module daten, so any future times you code your car or any other car with the same version of the module, you'll have that option available to you without doing anything new. Second, it's a good habit to get into doing, especially since some modules don't play nice with NETTODAT coding. Finally, and although it may not look it from the instructions, it's easier and more elegant than editing the NETTODAT, and a lot more foolproof.

Happy coding.
__________________
| 335i coupe | Monaco Blue | JB4 G5 ISO | Style 313M | Huper 40% tint | Aero lip | CSL trunk spoiler | M3 sideskirts
| Paint-matched grilles | Painted reflectors | GP Thunder II angel eyes | Smoked LED sidemarkers | Self-coded |
dwells is offline   United_States
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 09:10 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST