Broke Nipple for vacuum tube on intake manifold. Help

Tonkatruck · 02-17-2013, 06:04 PM

Well, I decided to do the walnut blasting. When I went to remove the vacuum tube from the intake manifold. I broke it off. As seen in the picture. Any advice on how to fix this, without buying a new intake manifold.

A lot of build up on the intake valves.

jpirelli · 02-18-2013, 11:44 AM

JB-Weld

David1 · 02-18-2013, 04:23 PM

Drill it and get a self tapping brass one. In the future, cut vacume lines off.

Tonkatruck · 02-18-2013, 09:30 PM

Quote:

Originally Posted by David1

Drill it and get a self tapping brass one. In the future, cut vacume lines off.

This is what I was thinking, where would you find a self tapping that small?

I cut most of my other vacuum lines off, I just thought how easy this one was to get to.

02-17-2013, 06:04 PM	#1
Tonkatruck New Member 0 Rep 18 Posts Drives: 07 335i E90 Alpine on tan Join Date: May 2012 Location: Herriman UT iTrader: (0)	Broke Nipple for vacuum tube on intake manifold. Help Well, I decided to do the walnut blasting. When I went to remove the vacuum tube from the intake manifold. I broke it off. As seen in the picture. Any advice on how to fix this, without buying a new intake manifold. A lot of build up on the intake valves.
	Appreciate 0 Tweet Quote

02-18-2013, 11:44 AM	#2
jpirelli Power is nothing without control 18 Rep 763 Posts Drives: E90 + E92 Join Date: Apr 2009 Location: Southeast/Southwest iTrader: (3)	JB-Weld
	Appreciate 0 Quote

02-18-2013, 04:23 PM	#3
David1 Brigadier General 243 Rep 3,480 Posts Drives: 09 E92 09 X5 Join Date: Mar 2007 Location: Columbus, OH iTrader: (0)	Drill it and get a self tapping brass one. In the future, cut vacume lines off. __________________ 2017 M2 Alpine White\|Black with Blue Stitching Dakota Leather\|Executive Pkg\|DCT
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search