E90Post
 


TNT Racewerks
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > Tracking, Autocrossing, Dragstrip, Driving Techniques > 1st Track Day = N54 Engine Failure :(



Reply
 
Thread Tools Search this Thread
      03-06-2013, 08:28 PM   #45
SneakyDeeky
Major
 
SneakyDeeky's Avatar
 
Drives: '07 E90 335i 6MT
Join Date: Feb 2011
Location: Redondo Beach, CA

Posts: 1,435
iTrader: (5)

Garage List
2007 BMW 335i E90  [4.83]
2014 Audi SQ5  [5.00]
Quote:
Originally Posted by Autobahn335i View Post
Good move to ditch that meth crap! For the track I would keep things as simple as possible. No stacking tunes, overcomplex fueling etc etc. More variables=more failures at the track...
Quote:
Originally Posted by Smooth 330i View Post
... OP, GL and keep the car as simple as possible while using quality parts.
That's my plan going forward - no meth, no E85, switch to Cobb tune, and for the track run Stage 2+ Sport or Aggressive maps with ACN 91 fuel blended with 100 octane pump gas to raise overall octane to 93+ or more. Maybe for the street I'll play with the 100 octane race gas map, but it'll be a while (I just know myself).

Quote:
Originally Posted by DallasBoosted View Post
Don't know why you quoted me on this, I'm not sure it's possible to hydrolock the motor on a CM10 nozzle unless the nozzle broke. There's some discussion of this on the engine perf. forum also but they seem to think the meth kit just doesn't flow enough meth to hydrolock it that way?

If we're saying it's from detonation, okay maybe, although at 14psi thats unlikely.

OP I'd inspect your meth hardware and see where the failure might have occurred.
Nah, you're right as I find it hard to believe too, but I trust my mechanic and can only believe what he saw when he removed the intake manifold.

I plan on inspecting the ECU, JB4, FSB, solenoid, and pump once it's all removed.
Quote:
Originally Posted by DallasBoosted View Post
Feel better about yourself now?
Quote:
Originally Posted by Killerfish2012 View Post
YEP!
You two sound like my two younger brothers.
We all love tracking, Bimmers, and especially the N54 platform, now punch each other in the arm, hug, and make-up (that's what we'd do in my house growing up).
__________________

6MT | JB4 G5 | E60 | Walbro 392 | NGK 5992 | Spec2+ | ER Dual Oil Coolers | ER CP | Synapse BOV | ETS FMIC | 3.46 Wavetrac LSD
BMS DCI | AR DPs | Magnaflow | BSH OCC | KW V1 | M3 Bits | Advan RS | Michelin PSS | LS3 AEs | P3 Boost Gauge | Dyno Results | COTM Pics
SneakyDeeky is online now   United_States
0
Reply With Quote
      03-08-2013, 12:28 AM   #46
labedra
First Lieutenant
 
labedra's Avatar
 
Drives: 2008 BMW 335i E92 6 MT
Join Date: Jun 2009
Location: Somewhere on Planet Earth for now.

Posts: 303
iTrader: (2)

Sorry to hear about your Meth mailfunction, man that sucks, I see you bidding for the cobb now, ....me 2. good choice Did you have any logs saved from JB4 when this happened ? I wonder if the Knock sensor malfunctioned causing meth to malfunction in any way....and then BOOM!
__________________

.../// TURBO! Why in the world would you choose anything else?... ///
labedra is offline   United_States
0
Reply With Quote
      03-08-2013, 12:47 AM   #47
SneakyDeeky
Major
 
SneakyDeeky's Avatar
 
Drives: '07 E90 335i 6MT
Join Date: Feb 2011
Location: Redondo Beach, CA

Posts: 1,435
iTrader: (5)

Garage List
2007 BMW 335i E90  [4.83]
2014 Audi SQ5  [5.00]
Yeah, Cobb here I come. No logs with the JB4, though, as that would have been a little crazy trying to log while out on the track.
__________________

6MT | JB4 G5 | E60 | Walbro 392 | NGK 5992 | Spec2+ | ER Dual Oil Coolers | ER CP | Synapse BOV | ETS FMIC | 3.46 Wavetrac LSD
BMS DCI | AR DPs | Magnaflow | BSH OCC | KW V1 | M3 Bits | Advan RS | Michelin PSS | LS3 AEs | P3 Boost Gauge | Dyno Results | COTM Pics
SneakyDeeky is online now   United_States
0
Reply With Quote
      03-08-2013, 09:05 AM   #48
DallasBoosted
Captain
 
DallasBoosted's Avatar
 
Drives: '08 E92 335i
Join Date: Apr 2012
Location: Dallas

Posts: 864
iTrader: (3)

Garage List
2008 BMW 335i  [5.00]
Quote:
Originally Posted by SneakyDeeky View Post
Yeah, Cobb here I come. No logs with the JB4, though, as that would have been a little crazy trying to log while out on the track.
I'm going to try to log a lap with the Cobb next event, by pulling into the hot pits, starting the logger, and then putting the Cobb back in the door pocket and going back out. Will be interesting.
DallasBoosted is offline  
0
Reply With Quote
      03-24-2013, 03:33 PM   #49
Hybrid For Life
Banned
 
Drives: Out of Spec
Join Date: Nov 2011
Location: Santa Barbara, CA

Posts: 2,119
iTrader: (4)

Any updates?
Hybrid For Life is offline   Germany
0
Reply With Quote
      03-24-2013, 03:42 PM   #50
Lifted07Duramax
Major
 
Drives: 2008 BMW red 335i coupe
Join Date: Jan 2013
Location: springfield, mo

Posts: 1,351
iTrader: (1)

sub'd
__________________
JB4 G5, VRSF catless DPs, FMIC, BMS DCI, Muffler Delete, Alpina B3 Flash, RB Turbos, BB Race Flash
Lifted07Duramax is offline  
0
Reply With Quote
      04-06-2013, 08:02 PM   #51
SneakyDeeky
Major
 
SneakyDeeky's Avatar
 
Drives: '07 E90 335i 6MT
Join Date: Feb 2011
Location: Redondo Beach, CA

Posts: 1,435
iTrader: (5)

Garage List
2007 BMW 335i E90  [4.83]
2014 Audi SQ5  [5.00]
-------------------------------------------------------
FINAL UPDATE: 4/6 - Just got home from taking my car the LTMW meet and the engine's running better than ever


New engine was installed on 3/12 and car returned to me on 3/14. I've put almost 700 miles on the new engine. Let me start by saying that SouthBay Autohaus knows their stuff and has been great to work with through all of this. Their expertise is top notch and I really appreciate how they've kept me informed along the way. The car is running better now than it ever has, but it's taken some serious work to get to this point.

Last time I posted, I knew my original clutch was toast but I didn't know that I'd have to purchase a new DMFW (Dual Mass Fly Wheel) too. When the engine seized, the torque from the driveshaft caused this to happen... (notice how the holes don't line up?).



Also, here's a few of the other issues we had to work through after the car was originally returned to me:
- squeeling pulley - replaced
- broken nipple off of plastic vacuum canister - replaced
- boost leak - replaced all vacuum lines
- vanos codes - replaced both intake and exhaust vanos solenoids
- low pressure fuel pump codes - resolved issue with ECU
- high pressure fuel pump codes - resolved issue with ECU
- clunking noise when turning left or right - issue caused by a worn bushing (see upgrades below for fix as I decided to use this as an excuse to upgrade to front and rear M3 control arms)

Here's what remains of piston #6 (left and middle) which exploded like a grenade. Far right is the piece of the block that was blown off.





Below is a better shot of the hole that was blown through the block





The head of piston #6 sheared off the top of the spark plug



Good shot of what 67k miles worth of carbon build-up looks like



Pic of the new engine below that was taken the day before it was installed




Upgrades / Future Plans:
- I now have a 2010 engine with 27k miles
- Carbon build-up was cleaned out completely (you can get to way more with the engine removed than you can otherwise)
- new water pump and thermostat installed
- new Vanos solenoids
- new spark plugs
- and a bunch of other new stuff (i.e. - crankshaft seal, oil pan gasket, exhaust gaskets, valve cover gaskets, etc...)
- The new Spec Stage 2+ clutch is great and has a very OEM feel with a very subtle, slightly stiffer engagement.
- Front and rear M3 control arms (link). Still waiting for these to arrive.
- Still waiting for my Qauife LSD to arrive. Plan on having LTMW install next weekend.
- Purchased PowerFlex Urethane Diff Bushings to go on the same time as the LSD:
Rear Diff Front Mounting Bushing PFR5-425 (qty 2)
Rear Diff Rear Mounting Bushing PFR5-426 (qty 1)
- Planning on having LTMW install some side splitters and maybe a custom front splitter for a little more downforce
- swapped out the JB4 for Cobb St2+ FMIC tune (really like it so far)
- installed BMS DP Fix

Oh, I have a BMS WW Meth Kit w/ FSB if anybody wants it for free.
I wouldn't feel right selling it since it's what caused all of this.

Summary:
I'm not bitter as I understood this was a possibility when I started modifying my car years ago and I plan to continue modifying my cars in the future. That said, I'll certainly be far more wary of engine mods. Thankfully, I really love this car and plan to continue enjoying it for at least a few more years now that I've made such a big investment in it; that was one expensive track day.
__________________

6MT | JB4 G5 | E60 | Walbro 392 | NGK 5992 | Spec2+ | ER Dual Oil Coolers | ER CP | Synapse BOV | ETS FMIC | 3.46 Wavetrac LSD
BMS DCI | AR DPs | Magnaflow | BSH OCC | KW V1 | M3 Bits | Advan RS | Michelin PSS | LS3 AEs | P3 Boost Gauge | Dyno Results | COTM Pics
SneakyDeeky is online now   United_States
0
Reply With Quote
      04-07-2013, 04:46 AM   #52
Autobahn335i
Lieutenant Colonel
 
Autobahn335i's Avatar
 
Drives: E92 335i
Join Date: Mar 2009
Location: Luxembourg

Posts: 1,569
iTrader: (5)

Good to see your car is running again

With the new chassis and drivetrain upgrades you'll enjoy tracking the car even more!
__________________
Performance Seats, Exhaust, Splitters, Pedals, Steering Wheel / RB Turbos / M3 CF Roof / Brembo GT BBK 355/345 / Rollcage / Forge FMIC / Quaife LSD / Bilstein PSS10 / M3 Suspension Parts / Powerflex Bushings / Vorshlag Camberplates / RE Toe Links / LeatherZ Gauges / Extended M3 DCT Paddles / ER Sports OC / AR OC / Aux Radiator / AR DPs / Alpina TCU Flash / COBB Pro-Tune
Autobahn335i is offline   Luxembourg
0
Reply With Quote
      04-07-2013, 08:53 AM   #53
CJ421
Brigadier General
 
CJ421's Avatar
 
Drives: 2011 E92 335i
Join Date: Feb 2011
Location: PA

Posts: 3,253
iTrader: (1)

Garage List
2011 BMW 335i  [4.66]
I'm very happy your car is back together again ... and kudos for remaining positive about the whole ordeal. Thanks for posting the pics too.
__________________
2011 BMW E92 335i, 6MT, Le Mans blue - Quaife LSD, JRZ RS Pro, JRZ camber plates, Eibach ERS, full M3 susp, custom toe arms, Powergrid end-links, SS brake lines, brake ducting, Michelin PSS, UUC SSK, ETS FMIC, ER CP, Perf. Exhaust, VAC RSIK, Sparcos; work by VAC Motorsports in Philadelphia
CJ421 is offline   United_States
0
Reply With Quote
Reply

Bookmarks

Tags
engine failure, hydrolock, jb4, meth failure, n54 335i

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:48 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST