FORUMS
- 5
|
|
![]() |
![]() |
![]() |
|
![]() |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
![]() |
|
BMW 3-Series (E90 E92) Forum
>
ST Coilovers Need Bump Stops?
|
![]() |
| 02-24-2013, 12:06 PM | #1 |
|
Captain
![]() ![]() ![]() ![]() |
ST Coilovers Need Bump Stops?
I'm going to install my new ST Coils next weekend and am planning to lower it so the fender is at the same height as the top of the tire (so a little lower than this)
![]() Since you can't control the dampening, and I do rub a tiny bit as of now with 19x11 in the rear and 19x9.5 in the front (H&R sport springs and oem shocks, extremely bouncy) and do not plan on getting new tires or add camber do you think its necessary to get bump stops for the new coils or will the stock dampening be stiff enough so that I do not rub as much
__________________
![]() JB e90 with black interior: Vorsteiner 2x2 carbon fiber hood/M3 front rep/fog delete/CSL trunk/m-tech rear/blacklines/amber delete/Varrstoen ES1 - Front: 19x9.5 Rear: 19x11/Hankook Ventus V12 tires/ ST Coilovers/matte black kidney grills/magnaflow catback exhaust/6000k HID/LED turn signal/ Carbon Fiber Interior/charcoal delete/15% tint |
![]() |
|
| 02-25-2013, 09:49 AM | #2 |
|
Private First Class
![]() Drives: 06 e90 325i, 05 325Ci (RIP) Join Date: Sep 2011
Location: Charlotte, NC
|
You should always have bump stops on your car. I'd be surprised if the ST's didn't come with them, but if they don't you need to use the OEM bump stops.
__________________
-Michael
Active Autowerke Stage II Tune | MMW CSv2 Exhaust | MMW Catless Headers | H&R Streetperformance Coilovers | 235/35 Sumitomo HTR ZII squared | 19x8.5 Hyperblack CSL's | M3 style front | trim wrapped in brushed steel vinyl | Slightly smoked tail lights with clear reverse lights | factory xenons ![]() |
![]() |
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|