Tirerack
Use the following links to go directly to useful tirerack winter items: Tirerack Winter Tires. Gary's Winter Tire FAQ.
Using the links directly supports E90Post with tirerack sales commision!

  E90Post
 


TireRack

   PLEASE HELP SUPPORT E90POST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS!
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > Wheels and Tires Forum Sponsored by The Tire Rack > Pss 245/35/19, 275/30/19



Wheels and Tires forum Sponsored by The Tire Rack
Please help to directly support e90post by doing your tirerack shopping from the above link. For every sale made through the link, e90post gets sponsor support to keep the site alive. Disclaimer

Reply
 
Thread Tools Search this Thread
      03-18-2013, 10:46 AM   #1
abhishriv
Major
25
Rep
1,289
Posts

 
Drives: 2007 335i Coupe (Space grey)
Join Date: Oct 2011
Location: Toronto

iTrader: (0)

Pss 245/35/19, 275/30/19

Wondering if I will rub. Reason I ask because I'm getting a good price on this set.

I'm running 19x8.5 et 30 front. 19x9.5 et 35 rear. Kw v2 on higher setting. -2 camber in rear. Will have -1.65 camber In front.

Anyone running these sizes on e92 335? Or know if I will rub with these sizes?

UPDATE:

I went ahead with the 245/35/19 in the front and 275/30/19 in the rear. couldnt put them all up on my car yet because one of the rear wheels had a slight crack in it.. going to get it welded and summer setup will be up next weekend. but i test fitted one of the fronts on my car. I have about 2-3mm clearance between the new wider front tires and the front springs which i think should be good enough. the only rubbing i get is on the front of the tire against the front of the fender liner on full lock. which shouldnt be much of a problem i don't think. havent had the chance to test fit the rears yet but will most likely need a slight roll.

Last edited by abhishriv; 03-31-2013 at 12:21 PM.
Appreciate 0
      03-18-2013, 01:54 PM   #2
madmax95gtr
FBO WTF!
madmax95gtr's Avatar
United_States
8
Rep
427
Posts

 
Drives: 335i, 99 Tacoma, 03 CBR 600RR
Join Date: May 2011
Location: San Diego, Ca

iTrader: (3)

Send a message via AIM to madmax95gtr Send a message via Yahoo to madmax95gtr
You should be ok
__________________

V710 19x9.5 Square|H&R Sport Springs|6000k D1S|Blacklines|Procede v5|HKS BOV|Stett CP|BMS DCI|Raceland DP|BigTom IC|M2 Exhaust|AEM Meth|M3 Front Bumper|
Appreciate 0
      03-19-2013, 10:30 AM   #3
abhishriv
Major
25
Rep
1,289
Posts

 
Drives: 2007 335i Coupe (Space grey)
Join Date: Oct 2011
Location: Toronto

iTrader: (0)

Quote:
Originally Posted by madmax95gtr
You should be ok
Hmm hopefully.
Appreciate 0
      03-19-2013, 10:30 AM   #4
abhishriv
Major
25
Rep
1,289
Posts

 
Drives: 2007 335i Coupe (Space grey)
Join Date: Oct 2011
Location: Toronto

iTrader: (0)

There has to be someone here running this setup..
Appreciate 0
      03-19-2013, 12:42 PM   #5
Jeef
Captain
United_States
8
Rep
890
Posts

 
Drives: AW E92 335i
Join Date: Nov 2008
Location: San Diego, CA

iTrader: (1)

im running those tire sizes but I am not dropped...
Appreciate 0
      03-19-2013, 01:18 PM   #6
cityazndan
Major
cityazndan's Avatar
United_States
17
Rep
1,454
Posts

 
Drives: E90
Join Date: Feb 2012
Location: Alexandria, VA

iTrader: (15)

Garage List
2007 BMW 335i  [5.00]
You're fine. I'm running 255/35/19 and 295/30/19 PSS, rubs only on big bumps
__________________
2007 BMW 335i | 6AT | ZSP | ZPP | ZCW {Smurfin' before it was cool}
|JB4 G5 ISO|Cobb|S&B Filters|RB|Evolution Racewerks|Synapse|ar design|JetHot|Active Autowerke|Bastuck|
||Amuse Ericcson|M-Sport|M5 SMG Knob|V1 Yellow Stripe Steering Wheel||
Appreciate 0
      03-20-2013, 06:37 AM   #7
Maaarkk
Captain
Maaarkk's Avatar
11
Rep
727
Posts

 
Drives: E92
Join Date: Nov 2011
Location: N.Ireland

iTrader: (0)

Garage List
2007 Bmw E92  [5.00]
I'm running 8.5 et37 (+5mm spacers) 245/35/19 fronts & 9.5 et30 275/30/19 rears dropped the whole way down on my coilovers with no rubbing or scrubbing at all
Appreciate 0
      03-20-2013, 08:53 AM   #8
abhishriv
Major
25
Rep
1,289
Posts

 
Drives: 2007 335i Coupe (Space grey)
Join Date: Oct 2011
Location: Toronto

iTrader: (0)

Quote:
Originally Posted by Maaarkk
I'm running 8.5 et37 (+5mm spacers) 245/35/19 fronts & 9.5 et30 275/30/19 rears dropped the whole way down on my coilovers with no rubbing or scrubbing at all
Which tires? PSS?
Appreciate 0
      03-20-2013, 05:31 PM   #9
Maaarkk
Captain
Maaarkk's Avatar
11
Rep
727
Posts

 
Drives: E92
Join Date: Nov 2011
Location: N.Ireland

iTrader: (0)

Garage List
2007 Bmw E92  [5.00]
Quote:
Originally Posted by abhishriv View Post
Which tires? PSS?
I got a set of Altenzo sport comforters, they were cheap and decent from reviews I'd read. Haven't had any trouble at all with them, looking to change up my wheels now though, only got the rims to do me a short while.
Appreciate 0
      03-21-2013, 06:50 PM   #10
abhishriv
Major
25
Rep
1,289
Posts

 
Drives: 2007 335i Coupe (Space grey)
Join Date: Oct 2011
Location: Toronto

iTrader: (0)

Quote:
Originally Posted by cityazndan
You're fine. I'm running 255/35/19 and 295/30/19 PSS, rubs only on big bumps
What's your wheel offsets and camber? Are u sedan?
Appreciate 0
      06-20-2013, 12:38 PM   #11
nitehawk
Lieutenant Colonel
nitehawk's Avatar
Canada
20
Rep
1,638
Posts

 
Drives: e92 335i 6MT
Join Date: May 2011
Location: Toronto

iTrader: (15)

Garage List
Quote:
Originally Posted by abhishriv View Post
Wondering if I will rub. Reason I ask because I'm getting a good price on this set.

I'm running 19x8.5 et 30 front. 19x9.5 et 35 rear. Kw v2 on higher setting. -2 camber in rear. Will have -1.65 camber In front.

Anyone running these sizes on e92 335? Or know if I will rub with these sizes?

UPDATE:

I went ahead with the 245/35/19 in the front and 275/30/19 in the rear. couldnt put them all up on my car yet because one of the rear wheels had a slight crack in it.. going to get it welded and summer setup will be up next weekend. but i test fitted one of the fronts on my car. I have about 2-3mm clearance between the new wider front tires and the front springs which i think should be good enough. the only rubbing i get is on the front of the tire against the front of the fender liner on full lock. which shouldnt be much of a problem i don't think. havent had the chance to test fit the rears yet but will most likely need a slight roll.
Curious how you made out with this? Are you running 5mm spacers in the front to clear the struts?
Appreciate 0
      07-02-2013, 05:10 PM   #12
abhishriv
Major
25
Rep
1,289
Posts

 
Drives: 2007 335i Coupe (Space grey)
Join Date: Oct 2011
Location: Toronto

iTrader: (0)

Quote:
Originally Posted by nitehawk View Post
Curious how you made out with this? Are you running 5mm spacers in the front to clear the struts?
nope no spacers needed. the front et is actually et35. just got alignment done so front camber is at -1.3 and rear is -2.0. even in the back only needed the least amount of roll, so little they didnt even charge me for it.
Appreciate 0
      07-02-2013, 09:00 PM   #13
robc1976
DIYER
robc1976's Avatar
89
Rep
4,754
Posts

 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

iTrader: (11)

I am running a 35 offset with a 5MM spacer so it is essentially a 30 offset with a Nitto 245/30/20 and a -1.5 camber and no rub but had to modify a few things to wich is easy
Attached Images
 
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Motiv 750 ST, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Delrin solid subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
Appreciate 0
      07-03-2013, 09:50 AM   #14
nitehawk
Lieutenant Colonel
nitehawk's Avatar
Canada
20
Rep
1,638
Posts

 
Drives: e92 335i 6MT
Join Date: May 2011
Location: Toronto

iTrader: (15)

Garage List
Quote:
Originally Posted by abhishriv View Post
nope no spacers needed. the front et is actually et35. just got alignment done so front camber is at -1.3 and rear is -2.0. even in the back only needed the least amount of roll, so little they didnt even charge me for it.
Nice, is that -1.3 front camber with stock strut mounts?
Appreciate 0
      07-03-2013, 10:58 AM   #15
robc1976
DIYER
robc1976's Avatar
89
Rep
4,754
Posts

 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

iTrader: (11)

Quote:
Originally Posted by cityazndan View Post
You're fine. I'm running 255/35/19 and 295/30/19 PSS, rubs only on big bumps
I run 295 Nitto with a 10MM spacer on my 20" setup but going to 19" and thought about going to PSS again (although I had better traction with Nitto, crazy I know) what offset are you runningI? I am sure you had to have a spacer to keep the rim off the strut/body...I had to but I am running a 10.5" rim so with the New 10" rim I may be okay....fenders are shaved...rear have the plastic pieces cut out where quarter panel/bumper meet ECT.
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Motiv 750 ST, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Delrin solid subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
Appreciate 0
      07-06-2013, 04:27 AM   #16
cityazndan
Major
cityazndan's Avatar
United_States
17
Rep
1,454
Posts

 
Drives: E90
Join Date: Feb 2012
Location: Alexandria, VA

iTrader: (15)

Garage List
2007 BMW 335i  [5.00]
I had weak offsets so it didn't pose an issue. rear fenders were rolled and shaved. rear offset was 38. I have since went "green" with lightweight rims with a smaller tire...but I miss the fat tire look.
__________________
2007 BMW 335i | 6AT | ZSP | ZPP | ZCW {Smurfin' before it was cool}
|JB4 G5 ISO|Cobb|S&B Filters|RB|Evolution Racewerks|Synapse|ar design|JetHot|Active Autowerke|Bastuck|
||Amuse Ericcson|M-Sport|M5 SMG Knob|V1 Yellow Stripe Steering Wheel||
Appreciate 0
      07-06-2013, 05:20 PM   #17
robc1976
DIYER
robc1976's Avatar
89
Rep
4,754
Posts

 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

iTrader: (11)

Quote:
Originally Posted by cityazndan View Post
I had weak offsets so it didn't pose an issue. rear fenders were rolled and shaved. rear offset was 38. I have since went "green" with lightweight rims with a smaller tire...but I miss the fat tire look.
With stg 3 VTT you better get the fat tires back!!!
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Motiv 750 ST, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Delrin solid subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
Appreciate 0
      07-06-2013, 09:09 PM   #18
cityazndan
Major
cityazndan's Avatar
United_States
17
Rep
1,454
Posts

 
Drives: E90
Join Date: Feb 2012
Location: Alexandria, VA

iTrader: (15)

Garage List
2007 BMW 335i  [5.00]
LSD will solve that for me , I'm running a PSS 275 and when these go, I plan on running AD08s which are wide as fcuk.
__________________
2007 BMW 335i | 6AT | ZSP | ZPP | ZCW {Smurfin' before it was cool}
|JB4 G5 ISO|Cobb|S&B Filters|RB|Evolution Racewerks|Synapse|ar design|JetHot|Active Autowerke|Bastuck|
||Amuse Ericcson|M-Sport|M5 SMG Knob|V1 Yellow Stripe Steering Wheel||
Appreciate 0
      07-06-2013, 10:03 PM   #19
robc1976
DIYER
robc1976's Avatar
89
Rep
4,754
Posts

 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

iTrader: (11)

Quote:
Originally Posted by cityazndan View Post
LSD will solve that for me , I'm running a PSS 275 and when these go, I plan on running AD08s which are wide as fcuk.
I spun 285 Nitto, PSS and spin 295 Nitto we will seer about PSS. The 295's do hook better though.
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Motiv 750 ST, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Delrin solid subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
Appreciate 0
      07-14-2013, 09:29 AM   #20
cityazndan
Major
cityazndan's Avatar
United_States
17
Rep
1,454
Posts

 
Drives: E90
Join Date: Feb 2012
Location: Alexandria, VA

iTrader: (15)

Garage List
2007 BMW 335i  [5.00]
Lol the 295 PSS hooks like a mofo. I do want to try AD08s, RE11s, or RS3s at some point. I do spin a lot more with the 275s without a doubt on the open diff.
__________________
2007 BMW 335i | 6AT | ZSP | ZPP | ZCW {Smurfin' before it was cool}
|JB4 G5 ISO|Cobb|S&B Filters|RB|Evolution Racewerks|Synapse|ar design|JetHot|Active Autowerke|Bastuck|
||Amuse Ericcson|M-Sport|M5 SMG Knob|V1 Yellow Stripe Steering Wheel||
Appreciate 0
      07-14-2013, 02:27 PM   #21
robc1976
DIYER
robc1976's Avatar
89
Rep
4,754
Posts

 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

iTrader: (11)

Quote:
Originally Posted by cityazndan View Post
Lol the 295 PSS hooks like a mofo. I do want to try AD08s, RE11s, or RS3s at some point. I do spin a lot more with the 275s without a doubt on the open diff.
Awesome!
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Motiv 750 ST, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Delrin solid subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
Appreciate 0
      07-15-2013, 12:58 AM   #22
cityazndan
Major
cityazndan's Avatar
United_States
17
Rep
1,454
Posts

 
Drives: E90
Join Date: Feb 2012
Location: Alexandria, VA

iTrader: (15)

Garage List
2007 BMW 335i  [5.00]
But I have a feeling in the pit of my stomach, youll manage to spin the PSS as well :P, 10mm difference isn't make or break and seeing how you have a LSD and lockdown kit...I may be very well screwed come September LOL.

Gonna have to get super wide body kit and stuff 335s like creaminz rofl.
__________________
2007 BMW 335i | 6AT | ZSP | ZPP | ZCW {Smurfin' before it was cool}
|JB4 G5 ISO|Cobb|S&B Filters|RB|Evolution Racewerks|Synapse|ar design|JetHot|Active Autowerke|Bastuck|
||Amuse Ericcson|M-Sport|M5 SMG Knob|V1 Yellow Stripe Steering Wheel||
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 03:06 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST