E90Post
 


Extreme Power House
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > NA Engine (non-turbo) / Drivetrain / Exhaust Modifications > Made a few airbox mods this weekend



Reply
 
Thread Tools Search this Thread
      05-05-2013, 04:02 PM   #1
Rik-330
New Member
 
Drives: 330i M Sport
Join Date: May 2011
Location: Northern Ireland

Posts: 19
iTrader: (0)

Made a few airbox mods this weekend

I made a few modifications to my air intake this weekend. I needed a new air filter and had a bit of time on my hands so got tinkering. I wasn't doing it for power gains.
It does now have a nicer intake growl and I could say that the throttle response feels snappier, but that could just be me putting my foot down harder to hear the noise. Anyway, I'm happy and that's all that matters

New Pipercross filter -


A ram air tube into the airbox -


The ram air tube goes down beside the front fog light -


Inlet for ram air tube -




Air scoops -


Some holes cut in the airbox to let some sound out (2 vertical rows of holes beside the ram air tube) -
Rik-330 is offline  
0
Reply With Quote
      05-05-2013, 04:07 PM   #2
Dylanize
Captain Dutch Rudder
 
Dylanize's Avatar
 
Drives: 07' E92
Join Date: Jan 2013
Location: Queen City, NC

Posts: 1,543
iTrader: (4)

Nice man! What parts did you use to do the intake piping stuff?
__________________

| Platinum Bronze Metallic | AA | VMR | ACS | DJApex Eurobox |
Dylanize is offline  
0
Reply With Quote
      05-05-2013, 04:58 PM   #3
ZhengHai
Lieutenant
 
ZhengHai's Avatar
 
Drives: E90
Join Date: Sep 2010
Location: AV, California

Posts: 441
iTrader: (0)

Nice! Do you notice a difference in sound?
__________________
ZhengHai is offline  
0
Reply With Quote
      05-05-2013, 06:58 PM   #4
BRGmatthew
Bausman
 
BRGmatthew's Avatar
 
Drives: around the block
Join Date: Sep 2009
Location: SoCal 626/NorCal 650

Posts: 1,785
iTrader: (18)

Send a message via AIM to BRGmatthew
DIY or didnt happen
BRGmatthew is offline   United_States
0
Reply With Quote
      05-05-2013, 08:52 PM   #5
thefull9yards
Private
 
thefull9yards's Avatar
 
Drives: 2007 Sparkling Graphite 328i
Join Date: Apr 2013
Location: San Francisco, CA

Posts: 67
iTrader: (0)

Two questions here:
What does the ram air tube do, and how hard was it to put in place?
and
Doesn't drilling the holes in the side defeat the purpose of a sealed cold air intake?
thefull9yards is offline   United_States
0
Reply With Quote
      05-05-2013, 08:53 PM   #6
thefull9yards
Private
 
thefull9yards's Avatar
 
Drives: 2007 Sparkling Graphite 328i
Join Date: Apr 2013
Location: San Francisco, CA

Posts: 67
iTrader: (0)

Also, want to grace us with a video of the sound?
thefull9yards is offline   United_States
0
Reply With Quote
      05-05-2013, 09:55 PM   #7
JDane07
Major
 
JDane07's Avatar
 
Drives: '06 E90 330i
Join Date: Nov 2011
Location: Napa, CA

Posts: 1,410
iTrader: (2)

Quote:
Originally Posted by thefull9yards View Post
Two questions here:
What does the ram air tube do, and how hard was it to put in place?
and
Doesn't drilling the holes in the side defeat the purpose of a sealed cold air intake?
Another inlet to let air into the intake.

Looks awesome OP. Do mine next. lol
__________________
OEM Mtech | AG M580 | Performance Exhaust | AA Tune | ST Coilovers | MMW Catless Headers | Euro BavX LS3 | Blacklines | CF diffuser, Performance Spoiler, Front splitters | Other goodies here and there...
Wish List: ESS SUPERCHARGER FTW
Recent Thread: http://www.e90post.com/forums/showth...NE07+vineyards
JDane07 is offline   United_States
0
Reply With Quote
      05-05-2013, 10:23 PM   #8
e92ninja
collector
 
e92ninja's Avatar
 
Drives: bmw 328 xdrive coupe 09
Join Date: Aug 2012
Location: indiana

Posts: 289
iTrader: (0)

Garage List
2001 BMW 525i  [0.00]
2009 BMW 328xi  [0.50]
what kind of box is that
__________________
Instagram: bmwninja xbox: bmwninja ps3: bmwninja5

Current Mods: BMW PE, Custom Vinyl Trim Piano Black, Staggered Wheel Set Up 18x8 18x9, Black out Emblems, Smoked Reflectors, Smoke Blinkers, Dynavin System, Vinyl Roof Shark Fin still white,
e92ninja is offline   United_States
0
Reply With Quote
      05-06-2013, 02:51 AM   #9
1QuikWS6
No 55mph
 
1QuikWS6's Avatar
 
Drives: 09 E92 328iX N51 3-Stage
Join Date: Jul 2009
Location: Blitzburgh, PA

Posts: 4,458
iTrader: (81)

Garage List
Quote:
Originally Posted by e92ninja View Post
what kind of box is that
Euro Airbox - cheaper than the BMW PI, and changing/cleaning the filter with the Euro is much easier as you simply need to remove the top cover - with the BMW PI you still need to remove the entire intake and take the halves apart to change/clean the filter + the PI retains the secondary charcoal filter (unless you dremel it out) while the Euro does not...
__________________
2009 328ix E92//SGM//ACS Roof Spoiler//MTech Aero Lip+Trunk Spoiler//M3 Side Skirts//CF Roundels+Grilles//M3 Novillo Interior//Perf Shift Lever+Boot//MPerf DCT Wheel//M3 GT3 eBrake Handle+Boot//ACS Pedals//M3 Mirrors//LCI Tails w/LUX Rev//DTEC V7 AE+MTec 6000K D1S+HPB HID 6000K Fogs//HPB LED Interior//RPI Scoops//CF Euro Airbox+Underhood Hsgs//K&N//BMW PE//MTech Rear Bumper-iS Sport Diffuser//CF Strut Brace//Vishnu OFT//BMW 193M's+Kumho 4X
1QuikWS6 is offline   United_States
0
Reply With Quote
      05-06-2013, 02:58 AM   #10
1QuikWS6
No 55mph
 
1QuikWS6's Avatar
 
Drives: 09 E92 328iX N51 3-Stage
Join Date: Jul 2009
Location: Blitzburgh, PA

Posts: 4,458
iTrader: (81)

Garage List
I like the secondary air inlet - similar to the Dinan intake mod

I agree the holes drilled in the housing defeat the purpose of a sealed intake and more than likely will allow hot underhood air to enter - that will probably be overcome by the increased volume of fresh air from the 2nd inlet, but you are still losing pressurized intake system by allowing air to bleed out thru those holes...

Interested as to what type snorkel you used behind the black grill in the bumper where the hose attaches - or did you mod the original in some way?

Did you use 3" dia flex hose, or bigger?
__________________
2009 328ix E92//SGM//ACS Roof Spoiler//MTech Aero Lip+Trunk Spoiler//M3 Side Skirts//CF Roundels+Grilles//M3 Novillo Interior//Perf Shift Lever+Boot//MPerf DCT Wheel//M3 GT3 eBrake Handle+Boot//ACS Pedals//M3 Mirrors//LCI Tails w/LUX Rev//DTEC V7 AE+MTec 6000K D1S+HPB HID 6000K Fogs//HPB LED Interior//RPI Scoops//CF Euro Airbox+Underhood Hsgs//K&N//BMW PE//MTech Rear Bumper-iS Sport Diffuser//CF Strut Brace//Vishnu OFT//BMW 193M's+Kumho 4X
1QuikWS6 is offline   United_States
0
Reply With Quote
      05-06-2013, 04:17 AM   #11
Rik-330
New Member
 
Drives: 330i M Sport
Join Date: May 2011
Location: Northern Ireland

Posts: 19
iTrader: (0)

Answers to a few of the questions -

Quote:
What parts did you use to do the intake piping stuff?
It is a 3" diameter, 1 meter long, flexible hose bought off eBay. I also got the trumpet snorkel which the hose fits into that you can see beside the fog light. I added some mesh to stop bugs, etc, entering the tube.

Quote:
Do you notice a difference in sound?
Yes there is a difference in sound. That was the reason behind drilling the holes - to let a bit a induction sound out. As the new filter went in, the ram air tube got fitted, the air scoops got fitted, the holes got drilled, all at the same time I can't say which specific change contributed most to the sound, but I would imagine most of it is due to the drilled holes.

Quote:
What does the ram air tube do, and how hard was it to put in place?
As was mentioned, the ram air tube provides a secondary inlet for the air intake.
It was a bumper off job to fit it as I wanted the trumpet snorkel to sit behind the grill in the bumper as it looks much neater. It was then bit of a squeeze behind the headlight to get it to enter the airbox.

Quote:
Doesn't drilling the holes in the side defeat the purpose of a sealed cold air intake?
I drilled the holes on the side of the airbox away from the engine to try to minimise as much heat going in as possible. I'm not naive enough to say no heat is going in but I reckon the extra cold air now entering the airbox more than compensates. The holes are there to let some noise out which was my intention. If I have now lost 0.5hp I'm not overly concerned.

Quote:
what kind of box is that
Yup, as mentioned it is a Euro airbox. My car luckily comes fitted with that as standard.

Quote:
I agree the holes drilled in the housing defeat the purpose of a sealed intake and more than likely will allow hot underhood air to enter - that will probably be overcome by the increased volume of fresh air from the 2nd inlet, but you are still losing pressurized intake system by allowing air to bleed out thru those holes...
This started off as just needing a new filter, which started me thinking about getting an aftermarket induction system, which lack of funds then made me think about experimenting on a budget. I wanted a bit of sound rather than seeking performance gains and if i got a bit of snappier throttle response then great result. Now I don't want to give the impression I now have something that sounds like a $300 induction system as that is far from the case, but for the small outlay and an enjoyable Saturday morning getting the spanners out in my garage whilst blasting out a few metal tunes I'm happy, plus I think it all looks pretty good.

Quote:
Interested as to what type snorkel you used behind the black grill in the bumper where the hose attaches - or did you mod the original in some way?
The snorkel was got off ebay. Was hard to find one small enough to fit in the space in the bumper and took a bit of modification to get it to fit. I used a hole saw to create the hole for it and it gets held in place nice and tight between the grill and the fog light surround.


And thanks for any positive comments.
Rik-330 is offline  
0
Reply With Quote
      05-07-2013, 02:20 PM   #12
ska///235i
***** noob
 
ska///235i's Avatar
 
Drives: M235i
Join Date: Sep 2005
Location: Boston

Posts: 8,872
iTrader: (31)

Garage List
2006 325xi  [0.00]
There might be an issue here, you need to close out the snorkel inlet or else this is useless cuz alot of air is escaping out from the other end.

This will be nice for engine bay cooling but not intake setup, you want the air to go to the manifold
__________________
" Hey, your m235i is not a true M car"..."No shit, its a M Performance doe"
ska///235i is offline   United_States
0
Reply With Quote
      05-08-2013, 04:24 PM   #13
Rik-330
New Member
 
Drives: 330i M Sport
Join Date: May 2011
Location: Northern Ireland

Posts: 19
iTrader: (0)

Quote:
There might be an issue here, you need to close out the snorkel inlet or else this is useless cuz alot of air is escaping out from the other end.

This will be nice for engine bay cooling but not intake setup, you want the air to go to the manifold
I've read and re-read this and I'm still not following what you mean .
Can you elaborate please.
Thanks
Rik-330 is offline  
0
Reply With Quote
      05-08-2013, 09:05 PM   #14
andrey_gta
Colonel
 
andrey_gta's Avatar
 
Drives: 130i coupé ;)
Join Date: Nov 2011
Location: Bimmerpost

Posts: 2,995
iTrader: (1)

Garage List
2008 BMW 128i  [0.00]
Very clean mods. I like
__________________
128i Sport 6MT converted to Euro 130i spec, tuned by evolve ~220 whp 207 wtq(ft-lb) SAE
In-progress: e46 m3 trans mnt, e36M lip Wishlist: m3 susp, n55 eng mnt, headers, LSD, finn dif e60


"The 1-series is the last car that BMW engineered before the Germans, as a car-making culture, fell out of love with driving." - R&T 2013 135is
andrey_gta is offline   Canada
0
Reply With Quote
      05-09-2013, 10:31 AM   #15
ska///235i
***** noob
 
ska///235i's Avatar
 
Drives: M235i
Join Date: Sep 2005
Location: Boston

Posts: 8,872
iTrader: (31)

Garage List
2006 325xi  [0.00]
Yea, didnt make sense lol disregard it
__________________
" Hey, your m235i is not a true M car"..."No shit, its a M Performance doe"
ska///235i is offline   United_States
0
Reply With Quote
      05-09-2013, 11:07 AM   #16
98RACE
Enlisted Member
 
Drives: 06 325i
Join Date: Apr 2012
Location: Burlington, Ont

Posts: 45
iTrader: (0)

Quote:
Originally Posted by Rik-330 View Post

Yes there is a difference in sound. That was the reason behind drilling the holes - to let a bit a induction sound out.
Nice mod.

If you want more sound could you not remove the silencer?
98RACE is offline  
0
Reply With Quote
      05-09-2013, 04:05 PM   #17
Rik-330
New Member
 
Drives: 330i M Sport
Join Date: May 2011
Location: Northern Ireland

Posts: 19
iTrader: (0)

If you are saying I should do something like a muffler delete in removing the silencer, then no, I'm not interested in that level of noise.
Rik-330 is offline  
0
Reply With Quote
      05-15-2013, 06:44 AM   #18
98RACE
Enlisted Member
 
Drives: 06 325i
Join Date: Apr 2012
Location: Burlington, Ont

Posts: 45
iTrader: (0)

No just the silencer on the intake tube. I remember seeing a DIY on here.
98RACE is offline  
0
Reply With Quote
      05-16-2013, 08:26 AM   #19
benzo23
Colonel
 
benzo23's Avatar
 
Drives: 14 F30 AW MSport
Join Date: Apr 2010
Location: FL

Posts: 2,886
iTrader: (1)

Hows the pipercross holding up? Any changes after a few miles on it? Just curious too with it being foam would the chances of it getting damp with moisture increase? That version of the pipercross is dry and non oiled correct? Sorry for all the questions lol
benzo23 is offline  
0
Reply With Quote
      05-17-2013, 01:07 AM   #20
ZhengHai
Lieutenant
 
ZhengHai's Avatar
 
Drives: E90
Join Date: Sep 2010
Location: AV, California

Posts: 441
iTrader: (0)

Very nice! I may consider it later in the future.
__________________
ZhengHai is offline  
0
Reply With Quote
      05-20-2013, 10:00 PM   #21
Rik-330
New Member
 
Drives: 330i M Sport
Join Date: May 2011
Location: Northern Ireland

Posts: 19
iTrader: (0)

Pipercross is holding up well and i'm still enjoying the sound I'm getting. Yes it is a dry foam filter. I have only opened the airbox lid once after fitting it and there was certainly no moisture in it then. I haven't put a huge amount of miles on it as I've been in Chicago with work for the last few weeks (I live in Northern Ireland).

Going back to a previous post, what is the silencer on the intake tube?
Rik-330 is offline  
0
Reply With Quote
      05-21-2013, 01:02 PM   #22
Smooth 330i
Captain
 
Smooth 330i's Avatar
 
Drives: Sleepy 330i
Join Date: Sep 2011
Location: PA

Posts: 960
iTrader: (8)

Quote:
Originally Posted by Rik-330 View Post
Pipercross is holding up well and i'm still enjoying the sound I'm getting. Yes it is a dry foam filter. I have only opened the airbox lid once after fitting it and there was certainly no moisture in it then. I haven't put a huge amount of miles on it as I've been in Chicago with work for the last few weeks (I live in Northern Ireland).

Going back to a previous post, what is the silencer on the intake tube?

Seems like a clean set-up similar to Dinan. Did you use automotive grade tube?

The only negative that I can see is that brake cooling inlet is used but that shouldn't be an issue if you are not tracking. It would be nice if there is a way to utilize the center lower section of the bumper to scoop up additional air to keep the brake cooling intact. Let us know how that filter is holding up after a few K km.
__________________

E90 330i Sport | JRZ RS1 | Dinan | Quaife | Evolve
M3 Bits | GC | Apex | Braile | Supersprint | Reccaro
Stoptech BBK | BMW Perf | Macht Schnell | Turner
Smooth 330i is online now  
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 09:27 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST