Tirerack
Use the following links to go directly to useful tirerack winter items: Tirerack Winter Tires. Gary's Winter Tire FAQ.
Using the links directly supports E90Post with tirerack sales commision!

  E90Post
 


TireRack

   PLEASE HELP SUPPORT E90POST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS!
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > Wheels and Tires Forum Sponsored by The Tire Rack > Shaving rear fenders



Wheels and Tires forum Sponsored by The Tire Rack
Please help to directly support e90post by doing your tirerack shopping from the above link. For every sale made through the link, e90post gets sponsor support to keep the site alive. Disclaimer

Wheel offset calculator courtesy of BimmerPost.com. You may use this calculator to calculate what tire sizes you might need if you upgrade your tires, or what wheel sizes/offsets are compatible with your car.
    Current Wheel Width  inches             Current Wheel Offset  mm.
         New Wheel Width  inches                  New Wheel Offset  mm.
 
TIRE WIDTH
/
ASPECT RATIO
- WHEEL DIAMETER
ORIGINAL TIRES
/
NEW TIRES
/
Based on your stock wheel setup, your new wheel will have:
Original Tires Diameter (in.)
      New Tires Diameter (in.)
  Difference in diameter (in.)
           Percent Difference %
                     
Speedo @60mph will read: mph
Collapse/Expand the BimmerPost Wheel and Tire calculator
Reply
 
Thread Tools Search this Thread
      05-15-2013, 06:37 AM   #45
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,190
iTrader: (10)

Quote:
Originally Posted by ~XxTeexX~ View Post
careful with the split fender now, once you guys start to push the fitment out anymore the tire will heat up that fender and pull it away from outer fender. from that point on that inner fender will start to chop into your side wall.
very good advice!
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, Meyle HD tie-rods, HPA rear toe arms, Wavetrac LSD, DEFIV kit, KW clubsport coilovers, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      05-15-2013, 07:41 AM   #46
JaysBlueE92
Mr. Monaco
 
JaysBlueE92's Avatar
 
Drives: Slow..
Join Date: Sep 2008
Location: New Jersey

Posts: 3,727
iTrader: (8)

Garage List
2007 E92  [2.50]
Quote:
Originally Posted by 07tundra View Post
Oh hell yes just a roll would be perfect I ran 10.5 et22 just fine with a wild roll!
great thanks
__________________
JaysBlueE92 is offline   United_States
0
Reply With Quote
      05-15-2013, 04:15 PM   #47
Mad K
Private First Class
 
Drives: 07 335i
Join Date: Jun 2012
Location: Charleston AFB

Posts: 174
iTrader: (0)

Quote:
Originally Posted by ~XxTeexX~ View Post
careful with the split fender now, once you guys start to push the fitment out anymore the tire will heat up that fender and pull it away from outer fender. from that point on that inner fender will start to chop into your side wall.
THIS^

Just checked mine today and it was eating up my sidewall bad. Also moved away like 1-2mm. Need to figure out how to keep that sucker in place.
Mad K is offline  
0
Reply With Quote
      05-15-2013, 05:24 PM   #48
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,190
iTrader: (10)

Quote:
Originally Posted by Madk180sx View Post
THIS^

Just checked mine today and it was eating up my sidewall bad. Also moved away like 1-2mm. Need to figure out how to keep that sucker in place.
I am going to have mine spot welded.
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, Meyle HD tie-rods, HPA rear toe arms, Wavetrac LSD, DEFIV kit, KW clubsport coilovers, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      05-15-2013, 06:58 PM   #49
07tundra
Major
 
Drives: TUNDRA
Join Date: Jan 2012
Location: New Mexico

Posts: 1,084
iTrader: (9)

Rob so you have a 10.5 rim with a 295 is it bubbling over the lip of the rim yet. Any reason why you didn't go 11?
07tundra is offline   United_States
0
Reply With Quote
      05-15-2013, 07:03 PM   #50
Mad K
Private First Class
 
Drives: 07 335i
Join Date: Jun 2012
Location: Charleston AFB

Posts: 174
iTrader: (0)

Quote:
Originally Posted by robc1976 View Post
I am going to have mine spot welded.
Think the welds will ruin the paint on fender? You gonna trim the inner metal higher before you have it welded up.

Post some pics after.
Mad K is offline  
0
Reply With Quote
      05-15-2013, 08:59 PM   #51
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,190
iTrader: (10)

Quote:
Originally Posted by Madk180sx View Post
Think the welds will ruin the paint on fender? You gonna trim the inner metal higher before you have it welded up.

Post some pics after.
Car is getting repainted
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, Meyle HD tie-rods, HPA rear toe arms, Wavetrac LSD, DEFIV kit, KW clubsport coilovers, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      05-15-2013, 09:00 PM   #52
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,190
iTrader: (10)

Quote:
Originally Posted by 07tundra View Post
Rob so you have a 10.5 rim with a 295 is it bubbling over the lip of the rim yet. Any reason why you didn't go 11?
285 was stretched a bit...295 is ever so slightly stretched...almost even.
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, Meyle HD tie-rods, HPA rear toe arms, Wavetrac LSD, DEFIV kit, KW clubsport coilovers, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      05-15-2013, 09:26 PM   #53
07tundra
Major
 
Drives: TUNDRA
Join Date: Jan 2012
Location: New Mexico

Posts: 1,084
iTrader: (9)

That's one fat tire I guess it depends the manufacturer also either way you're doing a good job. Your opinion If you had a choice on rims LC818 or F14 deep concave not sdc. Which one looks better
07tundra is offline   United_States
0
Reply With Quote
      05-15-2013, 09:59 PM   #54
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,190
iTrader: (10)

Quote:
Originally Posted by 07tundra View Post
That's one fat tire I guess it depends the manufacturer also either way you're doing a good job. Your opinion If you had a choice on rims LC818 or F14 deep concave not sdc. Which one looks better
I had satin black LC818....want a pic? If these where PSS they would stick over the rim but have less tread.
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, Meyle HD tie-rods, HPA rear toe arms, Wavetrac LSD, DEFIV kit, KW clubsport coilovers, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      05-15-2013, 10:31 PM   #55
07tundra
Major
 
Drives: TUNDRA
Join Date: Jan 2012
Location: New Mexico

Posts: 1,084
iTrader: (9)

shave

Quote:
Originally Posted by robc1976 View Post
I had satin black LC818....want a pic? If these where PSS they would stick over the rim but have less tread.
You didnt answer the ? lol I ordered lc818 but i think I'm gonna get the f14's instead and just sell the LC Yes PSS are wide very wide I personally like the Nitto Triple 5's
07tundra is offline   United_States
0
Reply With Quote
      05-17-2013, 12:57 AM   #56
#Tee
Chronic trollololer level 60
 
#Tee's Avatar
 
Drives: yes
Join Date: Oct 2011
Location: Socal

Posts: 4,650
iTrader: (0)

LOL dont count remember? raising the car was not an option! lower it to where it was and go 80 on the freeway.
__________________

#TeamStretchNpoke IG:Tee212
custom cf rear side diffuser add ons for sale (e9x,M3s,f3x) pm me for details. thread http://www.e90post.com/forums/showthread.php?t=962442
#Tee is online now  
0
Reply With Quote
      05-17-2013, 06:34 AM   #57
07tundra
Major
 
Drives: TUNDRA
Join Date: Jan 2012
Location: New Mexico

Posts: 1,084
iTrader: (9)

LOL

Quote:
Originally Posted by ~XxTeexX~ View Post
LOL dont count remember? raising the car was not an option! lower it to where it was and go 80 on the freeway.
I know I know but I had to start somewhere! I might owe you a Dr pepper then! lmao
07tundra is offline   United_States
0
Reply With Quote
      05-17-2013, 06:45 AM   #58
#Tee
Chronic trollololer level 60
 
#Tee's Avatar
 
Drives: yes
Join Date: Oct 2011
Location: Socal

Posts: 4,650
iTrader: (0)

ahah super sized pls! shipped to 92505! :P
__________________

#TeamStretchNpoke IG:Tee212
custom cf rear side diffuser add ons for sale (e9x,M3s,f3x) pm me for details. thread http://www.e90post.com/forums/showthread.php?t=962442
#Tee is online now  
0
Reply With Quote
      05-17-2013, 06:48 AM   #59
07tundra
Major
 
Drives: TUNDRA
Join Date: Jan 2012
Location: New Mexico

Posts: 1,084
iTrader: (9)

Shave

Quote:
Originally Posted by ~XxTeexX~ View Post
ahah super sized pls! shipped to 92505! :P
FUNNY VERY FUNNY
07tundra is offline   United_States
0
Reply With Quote
      08-19-2013, 08:15 PM   #60
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,190
iTrader: (10)

Quote:
Originally Posted by #Tee View Post
careful with the split fender now, once you guys start to push the fitment out anymore the tire will heat up that fender and pull it away from outer fender. from that point on that inner fender will start to chop into your side wall.
I barely rub now, is it possible to cut the metal inner fender that has separated out a bit?
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, Meyle HD tie-rods, HPA rear toe arms, Wavetrac LSD, DEFIV kit, KW clubsport coilovers, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      08-19-2013, 08:17 PM   #61
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,190
iTrader: (10)

Quote:
Originally Posted by Madk180sx View Post
Think the welds will ruin the paint on fender? You gonna trim the inner metal higher before you have it welded up.

Post some pics after.
I am thinking of trunking the metal inner fender up...can thus be done?
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, Meyle HD tie-rods, HPA rear toe arms, Wavetrac LSD, DEFIV kit, KW clubsport coilovers, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      12-03-2013, 10:04 PM   #62
BMWE90 ModMaster
Second Lieutenant
 
Drives: BMW's
Join Date: Nov 2013
Location: SoCal

Posts: 244
iTrader: (0)

Quote:
Originally Posted by robc1976 View Post
I barely rub now, is it possible to cut the metal inner fender that has separated out a bit?
if your getting the car painted I would get rid of the inner fender all together. I mean trim it off as much as you can.

heck since the car is being re painted, after you trim the whole inner fender lip, you should also roll/pull your fenders out until the old paint cracks, then get the inner lip spot welded, and send it to the body shop to get re painted.

that's what I would do if I was repainting my ride.

BMWE90 ModMaster is offline  
0
Reply With Quote
      12-03-2013, 10:09 PM   #63
BMWE90 ModMaster
Second Lieutenant
 
Drives: BMW's
Join Date: Nov 2013
Location: SoCal

Posts: 244
iTrader: (0)

Quote:
Originally Posted by robc1976 View Post
I am thinking of trunking the metal inner fender up...can thus be done?
YES, it can be done. I have trimmed/shaved many inner fender lips and that is a request I often get. Fender trimming is the way to go for the most aggressive set ups. PM me if you have any questions.
BMWE90 ModMaster is offline  
0
Reply With Quote
      12-03-2013, 10:11 PM   #64
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,190
iTrader: (10)

Quote:
Originally Posted by BMWE90 ModMaster View Post
YES, it can be done. I have trimmed/shaved many inner fender lips and that is a request I often get. Fender trimming is the way to go for the most aggressive set ups. PM me if you have any questions.
trimmed then a while back...easy as pie!
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, Meyle HD tie-rods, HPA rear toe arms, Wavetrac LSD, DEFIV kit, KW clubsport coilovers, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 05:33 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST