E90Post
 


European Auto Source
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > DIY Guides > Angle Eye Bulb Replacement Pre-LCI Cars E90 and E91



Comment
 
Tutorial Tools Search this Tutorial
Angle Eye Bulb Replacement Pre-LCI Cars E90 and E91
Published by Efthreeoh
06-01-2013
Angle Eye Bulb Replacement Pre-LCI Cars E90 and E91

This Halo Removal DIY is for a 2006 E90/E91 (pre-LCI) headlamp. This procedure replaces the Halo Rings (Angel Eyes) OEM lamp unit P/N 63117161444 and includes modifying the lamp unit to change just the 10W BA9S-base light bulb (a $7 part vs. the $45 lamp unit). This Halo lamp unit is used in the head lamp assembly for the following cars:

E90:
E90 323i Sedan
E90 325i Sedan
E90 325xi Sedan
E90 328i Sedan
E90 328xi Sedan
E90 330i Sedan
E90 330xi Sedan
E90 335i Sedan
E90 335xi Sedan
E90N:
E90N 323i Sedan
E90N 328i Sedan
E90N 328xi Sedan
E90N 335d Sedan
E90N 335i Sedan
E90N 335xi Sedan
E91:
E91 325xi Touring
E91 328i Touring
E91 328xi Touring
E91N:
E91N 328i Touring
E91N 328xi Touring

Parts needed:
12 Volt, 10 Watt, BA9S-Bayonet Base lamp, Osram P/N 64113. Most foreign-car parts store will have it in stock.
Isopropyl alcohol and cotton swab (to clean the new bulb)
Tools needed:
Wheel removal tools: jack, jackstands, 17MM wheel-bolt (lug) wrench, etc.
8MM socket (or nut driver)
10MM socket (or nut driver)
T15 Torx screwdriver
Small flat-head screw driver, long-shaft
Dremel tool w/ ball-shaped metal cutter

Basic Procedure:
1) Remove wheel
2) Remove front wheel well (fender liner)
3) Remove plastic cover to Halo light
4) Remove Halo light unit
5) Cut holes in Halo light holder
6) Install new bulb in the holder
7) Reassemble

Detailed instructions with pictures are provided in the attached Adobe file.
Tutorial Tools
Attached Images
File Type: pdf E90 Halo Change 3.pdf (969.3 KB, 762 views)
  #1  
By StarReaver on 06-11-2014, 11:46 PM
Member reviews
Difficulty [ 1 = Difficult ]
100%100%100%
5
Cost [ 1 = Expensive ]
100%100%100%
5
DIY Clarity [ 1 = Not clear ]
100%100%100%
5
Average 100%
Thank you so much for the writeup. I just replaced my driver's side angel eye bulb using your method. I was a bit careless (read: stupid) and the tip of my dremel hit the old bulb, making tiny glass fragments explode everywhere. Had I not been wearing a face shield things could have been really bad.

Eye protection is very important whenever working on cars or using power tools, even on small jobs like this.
Reply With Quote
Comment

Bookmarks

Tutorial Tools Search this Tutorial
Search this Tutorial:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 09:44 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST