E90Post
 


GTB Performance
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > Replicating 1M exhaust sound



Reply
 
Thread Tools Search this Thread
      07-30-2013, 10:02 AM   #1
ucmike
Private
 
ucmike's Avatar
 
Drives: 335i
Join Date: Oct 2012
Location: Connecticut

Posts: 92
iTrader: (0)

Replicating 1M exhaust sound

I was set on purchasing the performance exhaust for my e92, but a coworker just bought the 1m and the exhaust sounds great. I youtubed the 1m akrapovic and like the "bark" the sound has, whereas the 335i performance exhaust is a more bassy grunt sound.

What would be required to replicate the sound? Custom Exhaust, downpipes? Obviously i cannot use the 1m exhaust but would like to get close.

Thanks
ucmike is offline  
0
Reply With Quote
      07-30-2013, 10:12 AM   #2
Transport3r
Maaaaaaaaaaaaaad
 
Transport3r's Avatar
 
Drives: N54 E92 & N52 Z4
Join Date: Sep 2010
Location: Melbourne, FL

Posts: 1,206
iTrader: (2)

Looks like the 1M uses the same downpipes as any N54, then follows a 2>1 pipe and a single in dual out muffler:




A good starting point might be any of the single exhausts with dual tips, like VRSF?
__________________
Josh-

Transport3r is offline  
0
Reply With Quote
      07-30-2013, 10:15 AM   #3
Johnny Boost
Captain
 
Johnny Boost's Avatar
 
Drives: '11 335i M-Sport
Join Date: May 2013
Location: TBD

Posts: 886
iTrader: (0)

Quote:
Originally Posted by ucmike View Post
I was set on purchasing the performance exhaust for my e92, but a coworker just bought the 1m and the exhaust sounds great. I youtubed the 1m akrapovic and like the "bark" the sound has, whereas the 335i performance exhaust is a more bassy grunt sound.

What would be required to replicate the sound? Custom Exhaust, downpipes? Obviously i cannot use the 1m exhaust but would like to get close.

Thanks
You could try the 335IS exhaust. It is half the price of the performance exhaust and it sounds great. Maybe add downpipes to make it even louder
__________________
BMS Intake | BMS DP | Cobb AP V3 | E50 Pro Tune by PTF | VRSF CP | Alpina B3 TCU | Custom Coding

LUX v4 LEDs | Shadowline Grills | M3 Lip Spoiler | 5% tint
Johnny Boost is offline  
0
Reply With Quote
      07-30-2013, 10:47 AM   #4
1chanc3
Captain
 
Drives: 2010 e92 335i
Join Date: Feb 2013
Location: Los Angeles, CA

Posts: 762
iTrader: (0)

Quote:
Originally Posted by Johnny Boost View Post
You could try the 335IS exhaust. It is half the price of the performance exhaust and it sounds great. Maybe add downpipes to make it even louder
This might seem like a stupid question but where would you buy the IS exhaust? I haven't seen any vendor sell it. Dealership? And wouldn't it be super expensive from them?
__________________
2010 335i Coupe- Monaco Blue Metallic
1chanc3 is offline  
0
Reply With Quote
      07-30-2013, 10:49 AM   #5
ucmike
Private
 
ucmike's Avatar
 
Drives: 335i
Join Date: Oct 2012
Location: Connecticut

Posts: 92
iTrader: (0)

Quote:
Originally Posted by 1chanc3
Quote:
Originally Posted by Johnny Boost View Post
You could try the 335IS exhaust. It is half the price of the performance exhaust and it sounds great. Maybe add downpipes to make it even louder
This might seem like a stupid question but where would you buy the IS exhaust? I haven't seen any vendor sell it. Dealership? And wouldn't it be super expensive from them?
I would keep a watch on the classifieds and also make a WTB in your regional forum.
ucmike is offline  
0
Reply With Quote
      07-30-2013, 11:03 AM   #6
ashmostro
Lieutenant Colonel
 
ashmostro's Avatar
 
Drives: '13 335is DCT
Join Date: Jan 2013
Location: Vienna, VA

Posts: 1,603
iTrader: (8)

Quote:
Originally Posted by Transport3r View Post
A good starting point might be any of the single exhausts with dual tips, like VRSF?
This is it. You're hearing the different between a dual-muffler vs single muffler sound. Ever notice how the factory exhaust on a G37 coupe sounds more aggressive than the same sedan? It's in great part because of the single muffler on the coupe "collecting" the exhaust and resonating inside before going back out the dual outlets. The sedan has dual mufflers.
__________________
2013 335is DCT -- Apex 17x9 ET30 + 255/40-17" Toyo R1R | Quaife LSD | JRZ RS1 - 450/800# | M3 + Hardrace arms | BMS CP + OCC | ETS 5" FMIC | AFE FBO | RB PCV | Setrab oil cooler | Stoptech f+r BBK | FF Self-Tune

ashmostro is offline   United_States
0
Reply With Quote
      07-30-2013, 11:24 AM   #7
HeavyMetalRocker
Lieutenant
 
HeavyMetalRocker's Avatar
 
Drives: 2007 BMW 335i E90 6MT
Join Date: Nov 2012
Location: Dallas, Texas

Posts: 467
iTrader: (0)

You'll want to stick with any single to dual tip set up! I have the HPF and it's about as close as you'll get! I believe the AE exhaust is a good choice as well?!
__________________
2007 335i e90 6mt | RB Turbo | RB PCV | JB4 G5 | BB e85 Flash | Walbro 255lph | DCI | VRSF CP & Tial BOV | NGK Plugs | HPF Exhaust | VRSF DP's | CxRacing FMIC | Spec 2+ & SSMFW | StopTech Drilled/Slotted Rotors | Hawk Performance Pads | DEFIV Lockdown kit | Mtec V3 angels | 35/15% Llumar ceramic
HeavyMetalRocker is offline   United_States
0
Reply With Quote
      07-30-2013, 11:24 AM   #8
Transport3r
Maaaaaaaaaaaaaad
 
Transport3r's Avatar
 
Drives: N54 E92 & N52 Z4
Join Date: Sep 2010
Location: Melbourne, FL

Posts: 1,206
iTrader: (2)

Quote:
Originally Posted by ashmostro View Post
This is it. You're hearing the different between a dual-muffler vs single muffler sound. Ever notice how the factory exhaust on a G37 coupe sounds more aggressive than the same sedan? It's in great part because of the single muffler on the coupe "collecting" the exhaust and resonating inside before going back out the dual outlets. The sedan has dual mufflers.
Exactly, Wooo vibrations and resonance!
__________________
Josh-

Transport3r is offline  
0
Reply With Quote
      07-30-2013, 11:36 AM   #9
WesleyC
Colonel
 
Drives: BMW
Join Date: Dec 2008

Posts: 2,893
iTrader: (20)

Quote:
Originally Posted by 1chanc3 View Post
This might seem like a stupid question but where would you buy the IS exhaust? I haven't seen any vendor sell it. Dealership? And wouldn't it be super expensive from them?
Tischer sells the IS exhaust, but it isn't worth it, IMO. The PE is so much nicer.
WesleyC is offline   United_States
0
Reply With Quote
      07-30-2013, 12:01 PM   #10
Doyle
Hellafunctional
 
Drives: 335xi
Join Date: Nov 2010
Location: N/A

Posts: 426
iTrader: (2)

1m has high flow cats: down pipes ARE different

1m akra has a "cut out" valve where half the flow goes through a dual-outlet suitcase muffler and the other half goes through straight pipes.

If I were to do it:

high flow catted downpipes -> y-merge -> 3.5" vibrant resonator -> 3.5" single pipe -> y-split -> reused stock exhaust "flapper" and straight pipe on one side and vibrant single in/dual out suitcase on other side.
__________________
Go: Cobb S2+, Big Tom FMIC, CP-E DP & DCI, Royal Muffler, AR OC
Turn: TC Kline/Swift SA, Vorshlag Plates, UUC Front Bar, H&R M3 Rear Bar, VAC endlinks & spacers, Forgeline 18x9.5/NT05 265 Square
Stop: Endless MX72, Stoptech Rotors/Lines, Motul RBF600
Doyle is offline  
0
Reply With Quote
      07-30-2013, 12:12 PM   #11
ashmostro
Lieutenant Colonel
 
ashmostro's Avatar
 
Drives: '13 335is DCT
Join Date: Jan 2013
Location: Vienna, VA

Posts: 1,603
iTrader: (8)

Creative - I rikey
__________________
2013 335is DCT -- Apex 17x9 ET30 + 255/40-17" Toyo R1R | Quaife LSD | JRZ RS1 - 450/800# | M3 + Hardrace arms | BMS CP + OCC | ETS 5" FMIC | AFE FBO | RB PCV | Setrab oil cooler | Stoptech f+r BBK | FF Self-Tune

ashmostro is offline   United_States
0
Reply With Quote
      07-30-2013, 12:42 PM   #12
Doyle
Hellafunctional
 
Drives: 335xi
Join Date: Nov 2010
Location: N/A

Posts: 426
iTrader: (2)

Quote:
Originally Posted by ashmostro View Post
Creative - I rikey
Thinking usually gets me in trouble.
__________________
Go: Cobb S2+, Big Tom FMIC, CP-E DP & DCI, Royal Muffler, AR OC
Turn: TC Kline/Swift SA, Vorshlag Plates, UUC Front Bar, H&R M3 Rear Bar, VAC endlinks & spacers, Forgeline 18x9.5/NT05 265 Square
Stop: Endless MX72, Stoptech Rotors/Lines, Motul RBF600
Doyle is offline  
0
Reply With Quote
      07-30-2013, 12:46 PM   #13
ashmostro
Lieutenant Colonel
 
ashmostro's Avatar
 
Drives: '13 335is DCT
Join Date: Jan 2013
Location: Vienna, VA

Posts: 1,603
iTrader: (8)

So in this scenario would the straight pipe at the end merge back with one of the two muffler outlets?
__________________
2013 335is DCT -- Apex 17x9 ET30 + 255/40-17" Toyo R1R | Quaife LSD | JRZ RS1 - 450/800# | M3 + Hardrace arms | BMS CP + OCC | ETS 5" FMIC | AFE FBO | RB PCV | Setrab oil cooler | Stoptech f+r BBK | FF Self-Tune

ashmostro is offline   United_States
0
Reply With Quote
      07-30-2013, 01:01 PM   #14
Doyle
Hellafunctional
 
Drives: 335xi
Join Date: Nov 2010
Location: N/A

Posts: 426
iTrader: (2)

I assumed that the desire was for quad exhaust. In which it would be routed over the muffler, like the Akra.

If not, just get a normal single in/ single out oval muffler, position it transverse, and have the left exhaust be the straight pipe and the right be the muffled.
__________________
Go: Cobb S2+, Big Tom FMIC, CP-E DP & DCI, Royal Muffler, AR OC
Turn: TC Kline/Swift SA, Vorshlag Plates, UUC Front Bar, H&R M3 Rear Bar, VAC endlinks & spacers, Forgeline 18x9.5/NT05 265 Square
Stop: Endless MX72, Stoptech Rotors/Lines, Motul RBF600
Doyle is offline  
0
Reply With Quote
      07-30-2013, 01:04 PM   #15
ashmostro
Lieutenant Colonel
 
ashmostro's Avatar
 
Drives: '13 335is DCT
Join Date: Jan 2013
Location: Vienna, VA

Posts: 1,603
iTrader: (8)

Right. For the former, would be fun to see reactions at WOT.
__________________
2013 335is DCT -- Apex 17x9 ET30 + 255/40-17" Toyo R1R | Quaife LSD | JRZ RS1 - 450/800# | M3 + Hardrace arms | BMS CP + OCC | ETS 5" FMIC | AFE FBO | RB PCV | Setrab oil cooler | Stoptech f+r BBK | FF Self-Tune

ashmostro is offline   United_States
0
Reply With Quote
      07-30-2013, 01:08 PM   #16
ken1137
Brigadier General
 
ken1137's Avatar
 
Drives: a slow 2009 e90 335i
Join Date: Jun 2011
Location: Chicago

Posts: 3,697
iTrader: (7)

Garage List
2009 e90 335i  [3.20]
You cant duplicate the sound unfortunately. You can however buy the Akrapovic exhaust if you want the Akra sound for the 335. I otherwise highly recommend the BMW PE exhaust.
__________________

BMWCCA member
ken1137 is offline   United_States
0
Reply With Quote
      07-30-2013, 01:16 PM   #17
e90inAZ
Private
 
e90inAZ's Avatar
 
Drives: 08 E90 335i
Join Date: Apr 2013
Location: Tucson, AZ

Posts: 60
iTrader: (0)

Quote:
Originally Posted by Doyle View Post
I assumed that the desire was for quad exhaust. In which it would be routed over the muffler, like the Akra.

If not, just get a normal single in/ single out oval muffler, position it transverse, and have the left exhaust be the straight pipe and the right be the muffled.
This ^^

1M:


335i:
e90inAZ is offline  
0
Reply With Quote
      07-30-2013, 01:42 PM   #18
ucmike
Private
 
ucmike's Avatar
 
Drives: 335i
Join Date: Oct 2012
Location: Connecticut

Posts: 92
iTrader: (0)

Thanks for the help so far. I will be doing more research tonight after work.
ucmike is offline  
0
Reply With Quote
      07-30-2013, 01:49 PM   #19
buster84
Captain
 
Drives: 2009 335i E93 & 2007 X5 4.8
Join Date: Nov 2012
Location: Sacramento

Posts: 652
iTrader: (1)

Quote:
Originally Posted by e90inAZ View Post
335i:
Thats not a 335i stock exhaust, although that one does look nice. Is that an IS model?
buster84 is offline   United_States
0
Reply With Quote
      07-30-2013, 01:50 PM   #20
ashmostro
Lieutenant Colonel
 
ashmostro's Avatar
 
Drives: '13 335is DCT
Join Date: Jan 2013
Location: Vienna, VA

Posts: 1,603
iTrader: (8)

I think he means that's the Akra for the 335
__________________
2013 335is DCT -- Apex 17x9 ET30 + 255/40-17" Toyo R1R | Quaife LSD | JRZ RS1 - 450/800# | M3 + Hardrace arms | BMS CP + OCC | ETS 5" FMIC | AFE FBO | RB PCV | Setrab oil cooler | Stoptech f+r BBK | FF Self-Tune

ashmostro is offline   United_States
0
Reply With Quote
      07-30-2013, 01:54 PM   #21
buster84
Captain
 
Drives: 2009 335i E93 & 2007 X5 4.8
Join Date: Nov 2012
Location: Sacramento

Posts: 652
iTrader: (1)

Quote:
Originally Posted by ashmostro View Post
I think he means that's the Akra for the 335
HOLY SMOKES BATMAN!! Its $5425.00!!!!

Who the hell would pay that! You can buy upgraded turbos, or a custom top mount for that kind of money and get way more of an upgrade than just exhaust!

http://www.turnermotorsport.com/p-30...Fe-DQgodAAYA3A

Even $3170 for Stainless is sad!

http://www.turnermotorsport.com/p-17...FchxQgodbmgADg

You can get an exhaust shop to replicate that for maybe 1k. Half muffler half, straight pipe.
buster84 is offline   United_States
0
Reply With Quote
      07-30-2013, 01:56 PM   #22
ashmostro
Lieutenant Colonel
 
ashmostro's Avatar
 
Drives: '13 335is DCT
Join Date: Jan 2013
Location: Vienna, VA

Posts: 1,603
iTrader: (8)

100% agreed, but there's a market for everything.
__________________
2013 335is DCT -- Apex 17x9 ET30 + 255/40-17" Toyo R1R | Quaife LSD | JRZ RS1 - 450/800# | M3 + Hardrace arms | BMS CP + OCC | ETS 5" FMIC | AFE FBO | RB PCV | Setrab oil cooler | Stoptech f+r BBK | FF Self-Tune

ashmostro is offline   United_States
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:40 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST