E90Post
 


Extreme Power House
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > DIY Guides > E90 N54 LCI Adaptive Xeon Daytime light (angel light) bulb replacement



Reply
 
Thread Tools Search this Thread
      03-26-2016, 10:00 PM   #1
vapore0n
Captain
22
Rep
660
Posts

Drives: 2010 335i
Join Date: Jul 2011
Location: MA

iTrader: (0)

E90 N54 LCI Adaptive Xeon Daytime light (angel light) bulb replacement

I just got a "Daytime Running/parking Lamp" warning on the screen. Turns out my left angel light bulb died.
Searched around and found many post, confusing posts, most of which did not point me to the right direction. Most stated that I needed to go through the wheel well, which was not true for my case.

Here is how to replace the Daytime running/parking lamp bulb for a 2010 335i Xdrive N54 with Adaptive Xeon lights.


This is the error i got:


These are my headlights. Notice a single ring on the outside light.


This is what the top of the headlight assembly looks like. You will notice a top compartment with 3 screws. Inside this compartment is the halogen bulb for the cornering light. That is the one that lights up when on reverse or when taking corners.



This is what the back of the headlight looks like.
In the middle of this picture you can see a circular cap with fins. This is where the angel light bulb resides in. Just twist and remove the cap.


Once removed, you will be able to see the light bulb. To remove, twist towards the center of the car. Right side twists left, left side twists right.


These are both the original and the replacement. Light bulb is a H8 12V 4300k 35w. Bought at Autozone for $13.


Warning: As with any light bulb, do not touch the glass. The oil in hands will decrease the bulb's life (or that is what people say).

Before attempting to plug light bulb, remove the unneeded rubber washers from the new bulb. I made the mistake to not do this and could not install the new bulb.

Install the new bulb in plug.
Plug the new bulb into head light assembly. Try not get all cut up while installing the bulb back in.
Twist to secure bulb.

If it helps, you can remove the top cap that covers halogen bulb to help with install. You can peek inside and see if you are installing the bulb correctly.


Once done, reinstall the circular cap and try it out.
Appreciate 0
      03-28-2016, 08:20 PM   #2
blau808
Private First Class
14
Rep
150
Posts

Drives: 2010 335xi
Join Date: Dec 2012
Location: Honolulu

iTrader: (0)

Thanks dude, helpful!
Appreciate 0
      04-10-2016, 10:47 AM   #3
ccraig13
Lieutenant
ccraig13's Avatar
24
Rep
440
Posts

Drives: '07 E92 328xi 6MT
Join Date: Sep 2010
Location: NJ

iTrader: (0)

I always dread when I have to replace these. My hands are large so fitting the bulb in there can be frustrating...
__________________
2007 328xi E92 6MT Jet Black/Coral Red | NJ BMW CCA | Tracks: NJMP
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 08:34 PM.




e90post
e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST