E90Post
 


GTB Performance
 
BMW 3-Series (E90 E92) Forum > BMW E90/E92/E93 3-series General Forums > General E90 Sedan / E91 Wagon / E92 Coupe / E93 Cabrio > Multifunction steering wheel buttons dont work



Reply
 
Thread Tools Search this Thread
      10-26-2010, 02:56 PM   #1
Spoolin335
Justin Herass
Spoolin335's Avatar
Canada
58
Rep
1,155
Posts

 
Drives: E92 335i
Join Date: Nov 2008
Location: Canada

iTrader: (7)

Garage List
2007 BMW 335i  [4.50]
Multifunction steering wheel buttons dont work

BIMMERPOST
     Featured on BIMMERPOST.com
So i have a BMW Performance Steering Wheel and my multifuction buttons do not work. Everything to do with the performance steering wheel works, but not the multifunction buttons. The buttons do not light up when the headlights are on, so this leads me to believe there is no power to them. What i dont understand is, everything else on the steering wheel works. ie horn, performance steering wheel display and controls.

I took off the airbag and checked the wires, everything is hooked up. I also checked behind the coil spring and all the wires are attached correctly. I also checked under the passenger side glove box and all the wires are correct pertaining to the performance wheel install.

I compared everything to the "How To" for the performance wheel install, and everything looks correct.

I looked in the fuse box for a fuse that may pertain to the wheel buttons, but i dont really understand the symbols.
Does anyone know if there is a fuse for the steering wheel buttons?

I am not sure what else could be wrong...
__________________


Last edited by Spoolin335; 10-26-2010 at 03:01 PM.
Appreciate 0
      10-26-2010, 03:06 PM   #2
jimk
Captain
jimk's Avatar
United_States
11
Rep
735
Posts

 
Drives: 2011 E90 M3 M/T
Join Date: Jun 2009
Location: Denver, CO

iTrader: (5)

Mine went off too, after a dealer visit to replace a bad rack and pinion and power steering pump. The dealer blames the software update and even with PUMA case, it is still not fixed. This i btw on a stock steering wheel. I took it to a friend who has an Autologic unit and there was a fault for the steering switch. I still have not taken it...let us know what you find.
__________________
Appreciate 0
      10-26-2010, 11:57 PM   #3
Spoolin335
Justin Herass
Spoolin335's Avatar
Canada
58
Rep
1,155
Posts

 
Drives: E92 335i
Join Date: Nov 2008
Location: Canada

iTrader: (7)

Garage List
2007 BMW 335i  [4.50]
bump... nobody?
__________________

Appreciate 0
      08-27-2012, 05:29 PM   #4
johnniewalker
Lieutenant
johnniewalker's Avatar
Canada
5
Rep
552
Posts

 
Drives: 328 xdrive
Join Date: Jul 2011
Location: GTA, Canada

iTrader: (9)

I have the same issue, did you end up finding what the problem was?
__________________
Performance Intake and Exhaust, Apex arc-8, KW v1, Vorshlag camber, ER brake lines, Lux V4, AA tune
Appreciate 0
      08-27-2012, 07:52 PM   #5
Spoolin335
Justin Herass
Spoolin335's Avatar
Canada
58
Rep
1,155
Posts

 
Drives: E92 335i
Join Date: Nov 2008
Location: Canada

iTrader: (7)

Garage List
2007 BMW 335i  [4.50]
I fixed mine, turns out one of the ribbons inside the coil spring cartridge was ripped off the connector. Bought a new coil spring and swapped it in. Works fine now.

FYI: the coil spring cartridge is the device that holds the wires that connect the MF Buttons to the wheel.

Just remove the wheel and you will be able to see it.
__________________

Appreciate 0
      08-29-2012, 11:30 PM   #6
johnniewalker
Lieutenant
johnniewalker's Avatar
Canada
5
Rep
552
Posts

 
Drives: 328 xdrive
Join Date: Jul 2011
Location: GTA, Canada

iTrader: (9)

Quote:
Originally Posted by Spoolin335 View Post
I fixed mine, turns out one of the ribbons inside the coil spring cartridge was ripped off the connector. Bought a new coil spring and swapped it in. Works fine now.

FYI: the coil spring cartridge is the device that holds the wires that connect the MF Buttons to the wheel.

Just remove the wheel and you will be able to see it.

Thanks for the reply.
Can you specify in the picture which part do you mean by the "ribbon" ?
Attached Images
 
__________________
Performance Intake and Exhaust, Apex arc-8, KW v1, Vorshlag camber, ER brake lines, Lux V4, AA tune
Appreciate 0
      08-29-2012, 11:50 PM   #7
Spoolin335
Justin Herass
Spoolin335's Avatar
Canada
58
Rep
1,155
Posts

 
Drives: E92 335i
Join Date: Nov 2008
Location: Canada

iTrader: (7)

Garage List
2007 BMW 335i  [4.50]
You are almost there.
So to see the ribbons, you will need to take the coil spring cartridge off. There is 4 hex nuts that you take off then it will slide out. Dont forget to remove the cable on the back right hand side. Its a small clip.

You can see the 4 hex nuts in this photo


To get at the ribbon take a flat head screwdriver and pop the little clips off the coil spring front cover and you will be able to see the ribbon wires inside.

If none of the ribbons are ripped off then thats not your problem.
Make sure that then you put it back on, the coil spring is centered. There should be 6 full turns from one full lock turn to the other. So you will want to center it at 3 turns.

The ribbon cable i am talking about is inside the cartridge and looks like this:
Only there is 4 or 5 of them and once they are ripped, you are hooped and will need to buy a new coil spring cartridge.


The clips and screws are circled in red in this photo.
Attached Images
 
__________________


Last edited by Spoolin335; 08-29-2012 at 11:56 PM.
Appreciate 0
      09-02-2012, 05:32 PM   #8
johnniewalker
Lieutenant
johnniewalker's Avatar
Canada
5
Rep
552
Posts

 
Drives: 328 xdrive
Join Date: Jul 2011
Location: GTA, Canada

iTrader: (9)

Thanks a lot buddy, I found out that i have the same exact issue. I don't know how the ribbon inside the coil spring cartridge could have been damaged since i haven't open it, plus mine was new from the dealer.

I went twice to speedster to have them check it for me, which cost me 100+ in labor, went to bimmersport and they told me it needed coding, which cost me $50 and did not fix it anything, (the official pdf says it doesnt need any coding)

Today i took the time to check the ribbon as you told me and turns out that you were right. You saved me tons of headaches.
__________________
Performance Intake and Exhaust, Apex arc-8, KW v1, Vorshlag camber, ER brake lines, Lux V4, AA tune
Appreciate 0
      09-03-2012, 04:19 PM   #9
Spoolin335
Justin Herass
Spoolin335's Avatar
Canada
58
Rep
1,155
Posts

 
Drives: E92 335i
Join Date: Nov 2008
Location: Canada

iTrader: (7)

Garage List
2007 BMW 335i  [4.50]
Glad you got it fixed!
Dealer told me the same thing about my performance wheel; that it needed to be coded.
I remember reading in the instructions that it doesnt need to be coded so i knew something else was wrong..
__________________

Appreciate 0
      09-03-2012, 07:12 PM   #10
Thumperx
Major
United_States
19
Rep
1,333
Posts

 
Drives: 335I coupe
Join Date: Oct 2009
Location: SE Michigan

iTrader: (75)

Quote:
Originally Posted by Spoolin335 View Post
Glad you got it fixed!
Dealer told me the same thing about my performance wheel; that it needed to be coded.
I remember reading in the instructions that it doesnt need to be coded so i knew something else was wrong..
Both of your dealer and Indy are talking through their asses regarding coding for the electronic Performance steering wheel (EPSW). I doesn't require coding.

I can understand breaking the coil spring unit because I've broken mine too. Tracked one down, X5 or equivalent model with heat steering uses the same part number coil spring, and installed the new unit. Voila, back in the steering business again.
__________________
Name: Blanca | 07 E92 | AW-Blk | ZSP | Alcon BBK | M3 Bits | VM RR Links | Koni | UUC Sways | V5 | Dinan CAI | ETS IC | Fge DV | ER CP | Cyba | Raden. Exh | Mod Step | Trunk Drawer | Perf LED Wheel | Illum Dr Sills | IS Shifter | Parrot | Philps D1S | 6000k fog | MTECH RR | CSL Trunk | Aero | Roof Spoiler | PSS on BBS RS-GT 19s
Appreciate 0
      09-03-2012, 07:26 PM   #11
Thumperx
Major
United_States
19
Rep
1,333
Posts

 
Drives: 335I coupe
Join Date: Oct 2009
Location: SE Michigan

iTrader: (75)

Quote:
Originally Posted by Spoolin335 View Post
Glad you got it fixed!
Dealer told me the same thing about my performance wheel; that it needed to be coded.
I remember reading in the instructions that it doesnt need to be coded so i knew something else was wrong..
Both of your dealer and Indy are talking through their asses regarding coding for the electronic Performance steering wheel (EPSW). I doesn't require coding.

I can understand breaking the coil spring unit because I've broken mine too. Tracked one down, X5 or equivalent model with heat steering uses the same part number coil spring, and installed the new unit. Voila, back in the steering business again.
__________________
Name: Blanca | 07 E92 | AW-Blk | ZSP | Alcon BBK | M3 Bits | VM RR Links | Koni | UUC Sways | V5 | Dinan CAI | ETS IC | Fge DV | ER CP | Cyba | Raden. Exh | Mod Step | Trunk Drawer | Perf LED Wheel | Illum Dr Sills | IS Shifter | Parrot | Philps D1S | 6000k fog | MTECH RR | CSL Trunk | Aero | Roof Spoiler | PSS on BBS RS-GT 19s
Appreciate 0
      11-18-2012, 01:40 PM   #12
bmwmick
Second Lieutenant
bmwmick's Avatar
United_States
4
Rep
226
Posts

 
Drives: '97 Z3,'11 Z4 35i,'90 C4 Vette
Join Date: May 2011
Location: AZ/CA

iTrader: (1)

It's NOT a 'coil' spring, it's the CLOCK SPRING. Every car has one.
__________________
Mick
2011 35i 6-speed, ///M Sport, Deep Sea Blue, Black leather, Carbon trim, Cold Weather package, Premium package, 6CD changer. Delivered 7/15/11. Michelin Pilot SuperSport tires 10/24/12
Tucson,AZ/Santa Paula,CA
Appreciate 0
      11-18-2012, 02:00 PM   #13
Spoolin335
Justin Herass
Spoolin335's Avatar
Canada
58
Rep
1,155
Posts

 
Drives: E92 335i
Join Date: Nov 2008
Location: Canada

iTrader: (7)

Garage List
2007 BMW 335i  [4.50]
BMW Part number associated with that part calls it a coil spring. So to not confuse everyone it's a coil spring, not a clock spring.
__________________

Appreciate 0
      07-16-2013, 01:41 PM   #14
whiteout123
K3L1
1
Rep
103
Posts

 
Drives: 135i
Join Date: Feb 2013
Location: Miami

iTrader: (0)

anyone have the part number for the BMW Performance steering wheel clock spring. Need to replace.
Appreciate 0
      04-27-2014, 03:35 PM   #15
stickz23
Modify the N54
United_States
3
Rep
291
Posts

 
Drives: 335i
Join Date: Jun 2011
Location: Downey, California

iTrader: (10)

Same thing happened to my wheel after dealer visit. I followed this thread and confirmed
my ribbon is torn. Dealer doesn't sell the ribbon alone, anyone know where I can buy one?

I've considered even soldering the ribbon.
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 10:02 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST