Quote:
Originally Posted by Kruz
Well its all done except for the remote display which I want to expirment with for a while to see where I can place it that will be visible enough for me to read and low enough to tap/mute and stay out of sight as well.
I mounted mine V1 to the right of the mirrow as I thought it tucked in there a little better than the left side. I ran the cord along the windshield, down the pillar, into the glovebox like most others. I added one improvement IMHO in adhering the control box to the removable back plate of the glovebox. It lines up with the torx screw just a few mms lower. I left enough slack so it can be removed and serviced easily.
I then ran the concealed telephone wire out the back of the glovebox ziptied it across the ductwork tucking in all the extra slack. I then ran the last foot or so wedged between the aluminum console and rubber trim. For now, I like the concealed display to the left of the ashtray. If I mount it there I plan to use a thin foam double sided tape as the velcro it comes with it too thick for a flush fit.
Anways here are some pics. I also wanted to show the fusepanel layout differences for those who were confused with the pics here. Additionally, I took a shot of how I had to bend the fuses to be able to push the fusetap in fully.
Everything worked out in the end. Thanks again Josh.
|
I just did mine, and just turned the add a fuse thing the other direction... didnt have to bend the fuses.. fyi.
dave