[makkan00]

Originally Posted by ******

To keep things clear, you didn't do any wiring retrofit? You just use old cable from halogens to connect with your new LCI bi-xenons?

I had to do the wiring modification (not retrofit OEM cable for xenon).
So
- Add pin 2 (earth)
- Connect high beam (pin 6) to shutter pin 5 on Xenon headlights

And after that things work with coding modification.

However as I stated that on high beam, only shutter works (if the lights are not on) therefore no light.

If lights are on, then no issues.

I guess the only solution would be to install the OEM xenon retrofit cable.