Quote:
Originally Posted by djerik
I just finished my install in early December 2013 on my E91 LCI 2009/11 LHD without power seats. This is what I did:
1) Download the Sentinel ISID software, this has all the wiring diagrams
2) Bought (used) switch cluster for driver door.
3) Bought two (used) mirrors (foldable, heating & dimmable)
4) Bought (used) wire harness for passenger door fitted for foldable mirrors (it's also possible to make alterations on the existing cable from 5 wire mirror to 3 wire mirror connector but I preferred OEM)
5) Bought new pins for FRM and doors connectors
6) Installed one wire from FRM to drivers door (LIN bus)
7) Installed one wire from FRM to passenger door
8) Installed one wire from fuse box to passenger door
9) Coding
I cannot remember the pin numbers in the connectors but I can look it up. There is however a risk it does not match your car and hence I recommend the ISID software
|
Djerik
Did you look up the pin numbers? If so could you post them?
I'm after the ones used in numbers 6, 7 and 8 in your list above.
Thanks